Samsung Bluetooth Speaker Zilver Bedienungsanleitung
Samsung
Kabelloses Audio
Bluetooth Speaker Zilver
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Samsung Bluetooth Speaker Zilver (46 Seiten) in der Kategorie Kabelloses Audio. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/46
Wireless Audio Portable
user manual
Thank you for purchasing this Samsung product. To receive more
complete service, please register your product at
www.samsung.com/register
ENG_user manual/SWE_bruksanvisning/DAN_brugervejledning/
FIN_käyttöopas/NOR_brukerhåndbok/NL_gebruikershandleiding/
GER_Bedienungsanleitung/FRA_manuel d’utilisation/ITA_manuale utente/
SPA_manual del usuario/POR_manual do utilizador
DA-F60/DA-F61
English2
WHAT’S INCLUDED
Check for the supplied accessories shown below. The appearance of the accessories may differ
slightly from the illustrations.
Power Adapter Cover Fabric User Manual
Using the Cover Fabric
3
5V 500mA
USB
OPEN
AUX IN
DC 14V 2.5A
2
1
Wrap the cover around
the product. The cover
will be held in place by
magnets.
YOUR WIRELESS AUDIO PORTABLE
BASS
FUNC.
MUTE
VOL
DC 14V 2.5A
AUX IN
5V 500mA
SERVICE
SERVICE(USB) Port
Smart phone charging or firmware update
Volume control
VOL
VOL
MUTE button
Function button
Power Bass button
Power button (On/Off)
Battery indicator
Function LED
Bluetooth , AUX , SoundShare
NFC Tag
AUX IN connector (Analog Input)
Reset hole
Power cable connector
✎ When you charge smart phone via USB, the battery may discharge more quickly.
- Charging a smart phone through the Service (USB) port takes longer than charging the unit
using the adapter. It is only chargeable when this product is turned on.
CHECKING AND CHARGING THE BATTERY
You can play this product for 12 hours continuously on one charge.
For a full charge, we recommend you charge the battery for about 3 hours.
Checking the battery
The battery status indicator is normally off to
conserve battery power.
To check the charge level, press and hold the
Power button for 5 seconds.
[ ]
Green ............. 60% or more of full charge
Yellow ............ 30% to 60% of full charge
Red ................. 30% or less
Red blink ....... Charge needed
Charge the battery
DC 14V 2.5A
AUX IN
SERVICE
5V 500mA
BASS
FUNC.
MUTE
VOL
OPEN
DC 14V 2.5A
AUX IN
5V 500mA
SERVICE
Power Adapter
[ ]
OFF ................ Full charge
Green ............. 60% to 99% of full charge
Yellow ............ 30% to 60% of full charge
Red ................. 30% or less
✎ Charge and store the battery at 5° C ~ 35° C.
✎ Do not charge the battery for more than 12 hours or leave the battery fully discharged for a long
time. Doing so may shorten the battery life.
✎ Depending on how you use your player, actual battery life may vary and may be shorter than
specified.
3English
ENG
Support
DC 14V 2.5A
AUX IN
5V 500
BASS
FUNC.
MUTE
VOL
OPEN
Don't pull the support too hard. You can damage it.
Reset your Product
DC 14V 2.5A
AUX IN
OPEN
If an error occurs while you are operating this product and it
doesn't work properly, press the Reset hole with a pen tip or
similar item for 2 seconds.
USING THE NFC FUNCTION
Connect your NFC compatible device via Bluetooth to the Wireless
Audio Portable using this simple set-up procedure.
You can play music from the smart phone through the Wireless
Audio Portable.
1. Turn on the NFC function on the smart phone and make sure
the screen lock function on the smart phone is off. The smart
phone's NFC function will not work if screen lock is on.
2. Gently touch the NFC logo [ ] on the left of the Wireless
Audio Portable with the NFC supported device.
• If the Wireless Audio Portable is off, it will turn on
automatically.
3. A pop-up asking whether to proceed with the Bluetooth
connection appears on the smart phone. Select <Yes>.
• When the connection is complete, the 'connected' message
appears.
4. To disconnect the NFC device, touch the device to the Wireless
Audio Portable's left panel again.
• To connect another NFC device while the first smart phone
is still connected, touch that device to the Wireless Audio
Portable's left panel. The Wireless Audio Portable will
disconnect the first smart phone and connect to the second
smart phone.
✎ The NFC function is built into Android devices running Android
OS 4.1 Jellybean or later.
- If your device is running an Android OS earlier than Android
OS 4.1 Jellybean, you must download the 'Samsung NFC
Connection' application from Android market to use the
NFC function.
✎ The position of the NFC antenna differs on smart phones.
Check where the NFC antenna is located before connecting.
✎ If your smart phone is covered with a thick case, the connection
may not succeed.
✎ The N-mark is a trademark or registered trademark of NFC
Forum, Inc. in the United States and in other countries.
USING BLUETOOTH FUNCTION
You can connect the Wireless Audio Portable to Bluetooth devices
and enjoy music with high quality stereo sound, all without wires!
BASS
FUNC.
MUTE
VOL
Connect
External device
1. Press the
FUNC.
button on the Wireless Audio Portable to select
the Bluetooth function.
2. Press the
FUNC.
button for 3 seconds in Bluetooth mode.
3. The Bluetooth indicator blinks quickly and the product changes
to the pairing mode.
4. Scan or Search for the Wireless Audio Portable on your
Bluetooth device.
5. Select "[Samsung] W_Audio" on the list of items found by the
Bluetooth device.
• If the Bluetooth device fails to pair with the Wireless Audio
Portable, repeat Steps 2, 3, and 4.
6. Play music on the connected device.
✎ A Bluetooth device may cause noise or malfunction, depending
on usage, when:
- A part of your body is in contact with the receiving/
transmitting system of the Bluetooth device or the Wireless
Audio Portable.
- It is subject to electrical variation from obstructions caused
by a wall, corner or by office partitioning.
- It is exposed to electrical interference from same
frequency-band devices including medical equipment,
microwave ovens, and wireless LANs.
✎ The further the distance between the Wireless Audio Portable
and Bluetooth device, the worse the quality.
✎ The Bluetooth connection only works when the Bluetooth
device is close to the set. The connection is automatically cut
off if the Bluetooth device moves out of range.
Even within range, the sound quality may be degraded by
obstacles such as walls or doors.
- In Bluetooth connection mode, the Bluetooth connection will
be lost if the distance between the Wireless Audio Portable
and the Bluetooth device exceeds 5m.
✎ This wireless device may cause electric interference during its
operation.
Produktspezifikationen
| Marke: | Samsung |
| Kategorie: | Kabelloses Audio |
| Modell: | Bluetooth Speaker Zilver |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Samsung Bluetooth Speaker Zilver benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Kabelloses Audio Samsung
30 Juni 2024
30 Juni 2024
29 Juni 2024
29 Juni 2024
28 Juni 2024
28 Juni 2024
Andere Handbücher Samsung
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024