Rode Classic II Bedienungsanleitung

Rode Mikrofon Classic II

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Rode Classic II (16 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/16

(EMC, LVD)

Classic II

Instruction Manual

www.rodemic.com

- 2 -

Introduction

We at would like to thank you and

congratulate you on investing in the Classic II.

This valve microphone represents the finest studio

microphone technology currently available.

We know that it will serve you well for many years

and provide you with a performance you will be

extremely proud of.

The Classic II has been developed from the original

Classic, both of which are the preferred valve

microphone of a huge number of professional

engineers and musicians.

The character of the original Classic has been

retained, but by utilising a revised edge-terminated

diaphragm, and further refining the electronic

circuitry, a new level of performance has been

achieved.

Please take the time to visit www.rodemic.com and

While there you can view studio tips and techniques,

as well as browse the comprehensive range of

accessories for microphones.

Peter Freedman

Microphones

Sydney, Australia

- 3 -

Speciﬁ cations

Acoustic

Principle:

Pressure gradient

Directional

Pattern:

Switchable Omnidirectional/

Cardioid / Figure-8 in nine steps

(see graph)

Frequency

Range:

20 Hz-20 kHz

(see graph)

Output

Impedence:

200Ω

Sensitivity: -37dB re 1V/Pa

(14mV @ 94dB SPL) +/-2dB

Equivalent Noise: <18 SPL

(A - weighted per IEC651)

Maximum

Output:

+2dBu

(@ 1kHz, 1% THD into 1KΩ)

Dynamic Range: >113 dB SPL

(A - weighted per IEC651)

Maximum SPL: 131dB SPL

(@ 1kHz, 1% THD into 1KΩ)

Signal/Noise: > 76dB SPL

(A - weighted per IEC651)

Power

Requirement:

Dedicated Power Supply

(110 ~ 120V/220 ~ 240V, 50/60 Hz)

Net Weight: 1440gm

Packed Weight: 9kg

Produktspezifikationen

Marke:	Rode
Kategorie:	Mikrofon
Modell:	Classic II
Produktfarbe:	Messing
Übertragungstechnik:	Kabelgebunden
Typ:	Studio-Mikrofon
Kabellänge:	9 m
Geräteschnittstelle:	XLR-3
Mikrofon-Frequenz:	20 - 20000 Hz
Mikrofon-Empfindlichkeit:	-37 dB
Ausrichtung des integrierten Mikrofons:	Unidirektional
Anzahl enthaltener Produkte:	1 Stück(e)
XLR-Out:	Ja
Microphon Abmessungen (D x H):	65 x 201 mm
Mikrofongewicht:	1440 g
Output Widerstand:	200 Ohm