Rockford Fosgate R250-4 Bedienungsanleitung
Rockford Fosgate
Autoradio
R250-4
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Rockford Fosgate R250-4 (20 Seiten) in der Kategorie Autoradio. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/20
Serial Number:
Date of Purchase:
Birth Date:
Installation & Operation
Total
RMS Power
MONO AMPLIFIERS
R500-1DR250-1D R500-1
Installation assistance availible at:
www.rockfordfosgate.com/rftech
R O C K F O R D F O S G A T E . C O M
600 South Rockford Drive • Tempe, Arizona 85281 United States
Direct: (480) 967-3565 • Toll Free: (800) 669-9899
2
Dear Customer,
Congratulations on your purchase of the world’s finest brand of car audio
amplifiers. At Rockford Fosgate we are fanatics about musical reproduc-
tion at its best, and we are pleased you chose our product. Through
years of engineering expertise, hand craftsmanship and critical testing
procedures, we have created a wide range of products that reproduce
music with all the clarity and richness you deserve.
For maximum performance we recommend you have your new Rockford
Fosgate product installed by an Authorized Rockford Fosgate Dealer,
as we provide specialized training through Rockford Technical Training
Institute (RTTI). Please read your warranty and retain your receipt and
original carton for possible future use.
Great product and competent installations are only a piece of the puzzle
when it comes to your system. Make sure that your installer is using
100% authentic installation accessories from Rockford Fosgate in your
installation. Rockford Fosgate has everything from RCA cables and
speaker wire to power wire and battery connectors. Insist on it! After all,
your new system deserves nothing but the best.
To add the finishing touch to your new Rockford Fosgate image order
your Rockford accessories, which include everything from T-shirts to
jackets.
Visit our web site for the latest information on all Rockford products;
www.rockfordfosgate.com
or, in the U.S. call 1-800-669-9899 or FAX 1-800-398-3985. For all other
countries, call +001-480-967-3565 or FAX +001-480-966-3983.
Table of Content
If, after reading your manual, you still have questions regarding this prod-
uct, we recommend that you see your Rockford Fosgate dealer. If you need
further assistance, you can call us direct at . Be sure to 1-800-669-9899
have your serial number, model number and date of purchase available
when you call.
Safety
This symbol with “WARNING” is intended
to alert the user to the presence of important
instructions. Failure to heed the instructions
will result in severe injury or death.
This symbol with “CAUTION” is intended to
alert the user to the presence of important
instructions. Failure to heed the instructions
can result in injury or unit damage.
•To prevent injury and damage to the unit, please read and follow the
instructions in this manual. We want you to enjoy this system, not get
a headache.
•If you feel unsure about installing this system yourself, have it installed
by a qualified Rockford Fosgate technician.
•Before installation, disconnect the battery negative (-) terminal to
prevent damage to the unit, fire and/or possible injury.
Introduction
©2011 Rockford Corporation. All Rights Reversed. ROCKFORD FOSGATE and associated logos where applicable are registered trademarks of Rockford
Corporation in the United States and/or other countries. All other trademarks are the property of their respective owners. Specifications subject to change without notice.
PRACTICE SAFE SOUND
Continuous exposure to sound pressure levels over 100dB may cause
permanent hearing loss. High powered auto sound systems may
produce sound pressure levels well over 130dB. Use common sense
and practice safe sound.
PRATIQUEZ UNE ÉCOUTE SANS RISQUES
Une exposition continue à des niveaux de pression acoustique upérieurs à
100 dB peut causer une perte d’acuité auditive permanente. Les systèmes
audio de forte puissance pour auto peuvent produire des niveaux de
pression acoustique bien au-delà de 130 dB. Faites preuve de bon sens et
pratiquez une écoute sans risques
PRACTIQUE EL SONIDO SEGURO
El contacto continuo con niveles de presión de sonido superiores a 100
dB puede causar la pérdida permanente de la audición. Los sistemas de
sonido de alta potencia para automóviles pueden producir niveles de
presión de sonido superiores a los 130 dB. Aplique el sentido común y
practique el sonido seguro.
PRAKTIZIEREN SIE SICHEREN SOUND
Fortgesetzte Geräuschdruckpegel von über 100 dB können beim
Menschen zu permanentem Hörverlust führen. Leistungsstarke
Autosoundsysteme können Geräuschdruckpegel erzeugen, die weit über
130 dB liegen. Bitte wenden Sie gesunden Menschenverstand an und
praktizieren Sie sicheren Sound.
OSSERVATE LE REGOLE DEL SUONO SENZA PERICOLI
La costante esposizione a livelli di pressione acustica al di sopra dei
100dB possono causare la perdita permanente dell’udito. I sistemi
audio ad alta potenza possono produrre livelli di pressione acustica ben
superiori ai 130dB. Si consiglia il buon senso e l’osservanza delle regole
del suono senza pericoli
2 Introduction
3 Specifications
4-5 Design Features
6-9 Installation
Installation Considerations
Mounting Locations
Battery and Charging
Wiring the System
10 Operation
Adjusting Gain / Crossover
Phase Switch
Punch Bass / Remote Punch Level Control
11 Troubleshooting
12-16 Additional Languages
French
Spanish
German
Italian
20 Limited Warranty Information
3
Model R250-1D R500-1D R500-1
Rated Power
*Continuous Power Rating (RMS)
Measured @ 14.4V
125x1 @ 4 ohms
250x1 @ 2 ohms
250x1 @ 4 ohms
500x1 @ 2 ohms
320x1 @ 4 ohms
500x1 @ 2 ohms
Crossover Slope 12dB/Oct 12dB/Oct 12dB/Oct
Crossover Frequency Variable 50Hz - 250Hz Variable 50Hz - 250Hz Variable 40Hz - 130Hz
Punch Bass Variable 0 - +12dB @ 45Hz Variable 0 - +12dB @ 45Hz Variable 0 - +12dB @ 45Hz
Operating Voltage 9 - 16V DC 9 - 16V DC 9 - 16V DC
Frequency Response 20Hz - 250Hz ± 1dB 20Hz - 250Hz ± 1dB 20Hz - 250Hz ± 1dB
Battery Fuse Rating (not supplied) 25A 50A 60A
THD+N @ Rated Power <1.0 @ 4 ohms <1.0 @ 4 ohms <1.0 @ 4 ohms
Input Sensitivity 150mV - 8V 150mV - 8V 150mV - 8V
Input Impedance 20k 20k 20k
S/N Ratio CEA 2006 >75 >75 >80
S/N Ratio @ Rated Power >100 >100 >100
Channel Separation N/A N/A N/A
Common Mode Rejection Ratio >55 >55 >55
Damping Factor >200 >200 >200
Dimensions (LxWxH) 7.7” x 7.7” x 2.4”
(19.6cm x 19.6cm x 6.1cm)
7.7” x 7.7” x 2.4”
(19.6cm x 19.6cm x 6.1cm)
16.7” x 7.7” x 2.4”
(42.4cm x 19.6cm x 6.1cm)
Specications
CEA 2006
Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines
mean your amplifier’s output power ratings are REAL POWER numbers, not inflated marketing ratings.
4
Design Features
Power/Protect LED
Power LED illuminates blue when the unit is turned
on. Protect LED illuminates red if a short circuit or
to low of an impedance is detected at the speaker
connections. The amplifier will automatically shut
down if this occurs.
Gain Control
The input gain control is preset to match the output
of most source units.
Power/REM Terminals
The power and ground are nickel-plated clamp wire connectors and will
accommodate 4 AWG #8 (up to 1/2”) spade or ring style connectors.
The nickel-plated clamp wire connector and will accommodate 8 AWG
#8 (up to 3/8”) spade or ring style connectors.(This terminal is used to
remotely turn-on and turn-off the amplifier when +12V DC is applied.)
RCA Input/Pass-Thru Jacks
The industry standard RCA jacks provide an easy connection
for signal level input. They are nickel-plated to resist the signal
degradation caused by corrosion. The Pass-Thru provides a con-
venient source for daisy-chaining an additional amplifier without
running an extra set of RCA cables from the front of the vehicle to
the rear amplifier location.
5
Design Features
Punch Bass
This is an adjustable Bass level control centered at
45Hz @ 12dB/octave.
Speaker Terminals
The heavy duty, nickel-plated clamp wire connectors
(+ and -) will accommodate 8 AWG #8 (up to 3/8”)
spade or ring style connectors.
Remote Punch Level Control
When connected, the “Gain Control” is linked and allows
you to remotely control the output level of the amplifier
from the dash or center console.
Phase Switch
Allows you to select the output phase of the amplifier between 0° and 180°.
Fuses
These ATC fuses are easily accessible in case of failure.Always replace fuses with same
type and rating. See Specifications for fuse ratings.
Variable Crossover
Is a built-in 12dB/octave Butterworth filter with a crossover point
variable from 50-250Hz (R250-1D/R500-1D) or 40-130Hz (R500-1).
illus.-1.1
7
Installation
Before installation, disconnect the battery neg-
ative (-) terminal to prevent damage to the unit,
fire and/or possible injury.
Avoid running power wires near the low level
input cables, antenna, power leads, sensitive
equipment or harnesses. The power wires car-
ry substantial current and could induce noise
into the audio system.
1. Plan the wire routing. Keep RCA cables close together but isolated
from the amplifier’s power cables and any high power auto accessories,
especially electric motors. This is done to prevent coupling the noise
from radiated electrical fields into the audio signal. When feeding
the wires through the firewall or any metal barrier, protect them with
plastic or rubber grommets to prevent short circuits. Leave the wires
long at this point to adjust for a precise fit at a later time.
2. Prepare the RED wire (power cable) for attachment to the amplifier by
stripping 3/8” of insulation from the end of the wire. Crimp the bared
wire into a fork or ring style connector and attach to the B+ terminal.
Tighten the screw to secure the cable in place.
NOTE: The B+ cable MUST be fused 18” or less from the vehicle’s battery.
Install the fuseholder under the hood and ensure connections are water
tight.
3. Trim the RED wire (power cable) within 18” of the battery and splice in
a inline fuse holder (not supplied). See Specifications for the rating of
the fuse to be used. DO NOT install the fuse at this time.
4. Strip 1/2” from the battery end of the power cable and crimp an
appropriate size ring terminal to the cable. Use the ring terminal to
connect to the battery positive terminal.
5. Prepare the BLACK wire (Ground cable) for attachment to the
amplifier by stripping 3/8” of insulation from the end of the wire.
Crimp the bared wire into a fork or ring style connector and attach to
the GROUND terminal.Tighten the screw to secure the cable in place.
Prepare the chassis ground by scraping any paint from the metal
surface and thoroughly clean the area of all dirt and grease. Strip the
other end of the wire and attach a ring connector. Fasten the cable to
the chassis using a non-anodized screw and a star washer.
NOTE: Keep the length of the BLACK wire (Ground) as short as possible.
Always less than 30”.
6. Prepare the Remote turn-on wire for attachment to the amplifier by
stripping 3/8” of insulation from the end of the wire. Crimp the bared
wire into a fork or ring style connector and attach to the REMOTE
terminal.Tighten the screw to secure the wire in place. Connect the
other end of the Remote wire to a switched 12 volt positive source.
The switched voltage is usually taken from the source unit’s remote
amp on lead. If the source unit does not have this output available, the
recommended solution is to wire a mechanical switch in line with a
12 volt source to activate the amplifier.
7. Securely mount the amplifier to the vehicle or amp rack. Be careful not
to mount the amplifier on cardboard or plastic panels. Doing so may
enable the screws to pull out from the panel due to road vibration or
sudden vehicle stops.
8. Connect from source signal by plugging the RCA cables into the input
jacks at the amplifier.
Always ensure power is off or disconnected at
the amplifier before connecting RCA cables.
Failure to do so may cause damage to the am-
plifier and/or connected components.
9. Connect the speakers. Strip the speaker wires 3/8”, crimp the bared
wire into a fork or ring style connectors and attach to the speaker
terminals.Tighten the screw to secure into place. Be sure to maintain
proper speaker polarity. DO NOT chassis ground any of the speaker
leads as unstable operation may result.
10. Perform a final check of the completed system wiring to ensure that all
connections are accurate. Check all power and ground connections
for frayed wires and loose connections which could cause problems.
Install inline fuse near battery connection.
NOTE: Follow the diagrams for proper signal polarity.
This amplifier is not recommended for imped-
ance loads below 2-Ohms bridged.
Produktspezifikationen
Marke: | Rockford Fosgate |
Kategorie: | Autoradio |
Modell: | R250-4 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Rockford Fosgate R250-4 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Autoradio Rockford Fosgate
5 Oktober 2024
24 September 2024
23 September 2024
23 September 2024
23 September 2024
28 August 2024
28 August 2024
28 August 2024
28 August 2024
28 August 2024
Bedienungsanleitung Autoradio
- Autoradio Clatronic
- Autoradio Sanyo
- Autoradio Manta
- Autoradio Medion
- Autoradio Nedis
- Autoradio Philips
- Autoradio SilverCrest
- Autoradio Sony
- Autoradio Tevion
- Autoradio Panasonic
- Autoradio LG
- Autoradio AEG
- Autoradio Maginon
- Autoradio Technaxx
- Autoradio Denver
- Autoradio ECG
- Autoradio MarQuant
- Autoradio Renkforce
- Autoradio Telefunken
- Autoradio Trevi
- Autoradio Blaupunkt
- Autoradio Grundig
- Autoradio Kenwood
- Autoradio Daewoo
- Autoradio Pyle
- Autoradio Telestar
- Autoradio Aiwa
- Autoradio Auna
- Autoradio Caliber
- Autoradio Lenco
- Autoradio Pioneer
- Autoradio JBL
- Autoradio JVC
- Autoradio Krüger And Matz
- Autoradio Muse
- Autoradio Vieta
- Autoradio Hifonics
- Autoradio Akai
- Autoradio Dual
- Autoradio Hyundai
- Autoradio MT Logic
- Autoradio Orava
- Autoradio Orion
- Autoradio Skoda
- Autoradio Varta
- Autoradio Elta
- Autoradio Sencor
- Autoradio Biltema
- Autoradio OneConcept
- Autoradio Mercedes-Benz
- Autoradio Boston Acoustics
- Autoradio Harman Kardon
- Autoradio Magnat
- Autoradio XOMAX
- Autoradio Parrot
- Autoradio Smart
- Autoradio Alpine
- Autoradio Ford
- Autoradio Volkswagen
- Autoradio Volvo
- Autoradio Opel
- Autoradio MB Quart
- Autoradio Overmax
- Autoradio Crunch
- Autoradio Pure
- Autoradio NextBase
- Autoradio Norauto
- Autoradio AXTON
- Autoradio Clarion
- Autoradio Mac Audio
- Autoradio Conceptronic
- Autoradio Scott
- Autoradio Audiovox
- Autoradio Becker
- Autoradio ESX
- Autoradio Zenec
- Autoradio VDO
- Autoradio SPC
- Autoradio Roadstar
- Autoradio Tokaï
- Autoradio Audison
- Autoradio Macrom
- Autoradio Phonocar
- Autoradio Xblitz
- Autoradio Autovision
- Autoradio Boss
- Autoradio Hertz
- Autoradio Renault
- Autoradio Fiat
- Autoradio Kicker
- Autoradio Jensen
- Autoradio DLS
- Autoradio Eclipse
- Autoradio Eltax
- Autoradio Emphaser
- Autoradio Focal
- Autoradio Fusion
- Autoradio Ground Zero
- Autoradio Helix
- Autoradio Impulse
- Autoradio Lanzar
- Autoradio Mtx Audio
- Autoradio Naxa
- Autoradio Revo
- Autoradio Rodek
- Autoradio RTO
- Autoradio Sevic
- Autoradio Sirius
- Autoradio Soundstream
- Autoradio Spectron
- Autoradio Stinger
- Autoradio Tamashi
- Autoradio Toxic
- Autoradio Twister
- Autoradio Ultimate
- Autoradio US Blaster
- Autoradio VDO Dayton
- Autoradio Voxx
- Autoradio VW
- Autoradio Watssound
- Autoradio RetroSound
- Autoradio Kunft
- Autoradio Shuttle
- Autoradio Multilaser
- Autoradio Brigmton
- Autoradio Lark
- Autoradio Majestic
- Autoradio SoundMAX
- Autoradio Scion
- Autoradio Raveland
- Autoradio Planet Audio
- Autoradio Adcom
- Autoradio Sendai
- Autoradio Cartronix
- Autoradio Dension
- Autoradio Mystery
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
16 Oktober 2024
12 Oktober 2024
12 Oktober 2024
8 Oktober 2024
7 Oktober 2024
7 Oktober 2024
6 Oktober 2024
5 Oktober 2024
5 Oktober 2024