Roberts Blutune 300 Bedienungsanleitung

Roberts Radio Blutune 300

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Roberts Blutune 300 (3 Seiten) in der Kategorie Radio. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/3

Sound system, mains lead, remote control, 2 x AAA batteries, quick start guide and safety/warranty leaet.

Please visit www.robertsradio.com if you wish to download the full user guide.

Features

Controls

continued overleaf...

STEP 1 - Plug in & play radioWhat is in the Box?

• DAB / DAB+ / FM RDS digital sound system

• Bluetooth audio streaming from smartphone, tablet or laptop

• Wireless charging for use with a wireless enabled charging device

• USB socket for playback and device charging

• MP3 / WMA playback via CD and USB

• 20 radio station presets (10 DAB and 10 FM)

• Clock and dual alarms with radio or buzzer sounds

• Sleep and snooze timers

• 6 equaliser proles and separate treble, mid and bass options

• Adjustable display brightness

• Acoustically tuned wooden cabinet

• Multi function remote control

• Stereo auxiliary input and headphone sockets

A - Connect to the mains

B - Switch on your sound system

C - Select a DAB radio station

Please read the safety leaet provided before connecting your sound system to the mains.

1 Place your sound system on a at surface.

2 Fully extend the telescopic aerial located on the rear of the unit.

3 Plug the mains lead into the located on the rear of the mains socket

unit. Plug the mains lead into a wall socket and switch on the socket.

4 A start up screen will be displayed and a station scan will be performed.

5 When a signal has been found, the current time and date will appear

on the display. Note: If no signals are found it may be necessary to

relocate your sound system to a position giving better reception and

carry out a scan for new stations.

DUCT AC In

100-240V ~

W63 zH06 / zH05

Tuning / Select / Snooze control1

Mode / Alarm button2

CD slot3

LCD display4

On / Standby / Sleep button5

Volume control6

Wireless charging location7

Information / Dimmer button8

9 Stop / CD eject button

10 Menu / Back button

11 Previous / Scan down button

12 Play/Pause / Preset / Bluetooth pair button

13 Next / Scan up button

14 Headphone socket

15 Loudspeaker x 2

16 Infra red sensor

17 Bass ports x 2

18 Telescopic aerial

19 Auxiliary input socket

20 USB socket for service use only

21 USB playback / Charge socket

22 Mains power socket

23 Remote control (not shown see overleaf)

D - Scan for DAB stations

As time passes new stations may become available or you may have

moved to a different part of the country.

1 Press and release the Mode button until DAB is selected.

2 Press the Menu button.

3 Rotate the control and select Tuning ‘Scan’.

4 Press Tuning. Your sound system will perform a scan of the Band

III DAB channels. As new stations are found, they will be added to

the list stored in the sound system.

1 Press and release the On/Standby button to switch on the sound system.

After each use the sound system will remember the mode used and then

switch on in that mode the next time it is used.

• To switch your sound system to standby, press and release the On/Standby

button.

2 If this is the rst time the sound system is used a scan of the Band III DAB

channels will be carried out.

1 If needed, press and release the button until the DAB mode Mode

is selected.

2 Rotate the control to step through the list of available DAB Tuning

stations.

3 Press the Tuning control to select the station. Adjust the Volume

using the volume control.

4 Press the Info button to cycle through the various display options.

• The display options are, scrolling text, program type, multiplex

name, channel and frequency, signal strength / error rate, bit rate,

audio type and date.

Scanning...

Stations

Scan 16:34

068

BBC Radio 2

BBC Radio 3

BBC Radio 4

Daily Service

Parliament

BBC Radio 5 Live

BBC Radio 6

Station List 16.34

E - Search tuning - FM

1 Fully extend the telescopic aerial.

2 Press and release the Mode button until FM is selected.

3 Rotate the control clockwise or anti-clockwise and press the Tuning

control. Your sound system will scan upwards (low to high frequency)

or downwards (high to low frequency) and will stop automatically

when it nds a station of sufcient strength. Alternatively, press

the or Scan up Scan down buttons to scan the waveband.

4 If the signal is strong enough and there is RDS data present then

the radio will display the station name.

• Press the Info button to cycle through the various display options.

The display options are scrolling text, program type, frequency,

audio type and date.

103.40MHz

FM 16.34

Heart FM - The

best variety of

hits

Connecting Bluetooth devices

1 Ensure Bluetooth is enabled on your smart device.

2 Switch on your sound system. Press and release the Mode button

until the Bluetooth mode is selected. The Bluetooth indicator will

ash blue and your sound system will show that it is ‘discoverable’.

‘Looking for Device’ will be displayed.

3 On your smart device select ‘BLUTUNE 300’. Once the connection

is established the indicator will remain steady. You may now play

your music.

4 The audio player in your phone, tablet or PC may be able to

respond to the track buttons on Play/Pause, Next or Previous

the sound system. Note: Not all player applications or devices

may respond to all of these buttons. Adjust the volume on your

sound system and on the connected device. If you nd the volume

from the sound system is not sufcient, it may be that the volume

setting of the connected device needs to be increased.

5 To connect a different device on the apply a long press Bluetooth

Pair button (on the unit) or on the Select button apply a long press

(remote control). Your sound system will become discoverable

by other devices. Alternatively, press Menu and then choose

‘Disconnect’ ‘Yes’ and then . To remove all Bluetooth pairings

choose and then ‘Clear Pairing’ ‘Yes’.

STEP 2 - Connect Bluetooth

• For details on navigation and operation of your sound system, please see overleaf.

STEP 3 - Playing CD

Your sound system can playback CD-DA format audio CD-R/CD-RW discs. Your sound system may fail

to playback some CD-R/CD-RW discs due to poor recording and wide variation in quality of the CD-R/

CD-RW discs. Use only full size CDs (12cm diameter). Mini CDs (8cm diameter) are not compatible with

the player and may jam the CD mechanism.Transparent or partly transparent CDs cannot be played

since they may not be detected when inserted. Thin (Eco) CDs cannot be played. Some copy-protected

CDs may not be playable. The Blutune 300 is able to play CD-R and CD-RW discs containing MP3 and

WMA les.

Inserting a CD

Selecting a track

Repeat / Shufe

Play CD / CD MP3 / WMA discs

Ensure the CD player is empty before inserting a disc. If you cannot

insert a disc, press the button to remove the CD currently CD Eject

in the sound system.

CLASS 1

LA CTSER PRODU AC In

100-240V ~

W63 zH06 / zH05

Aux In

5V 1A

Designed & r Enginee ed in the UK,

Made in China

Roberts Radio Ltd, Stoney Lane, Whist resco 2Xon, P t, L35 W, UK

Glen Dimpl Euex rope Ltd, Airport R r .oad, Clogh an, Co Dublin, K67 VE08, Ireland

READ

SAFETY

GUIDE

FM: 87.5 - 108 MHz

DAB/DAB+(B : and III)

C annel bl 5 -h ock A 13F

Wir harging : 15Weless C Max

Bluetooth/CD/USB/DAB/DAB+/ tal Sound SystemFM Digi

Blutune 300

19 20 21 22

17 17

8 9 10

11 12

15 15

1 Press the button until ‘CD’ shows on the display or insert Mode

an audio CD.

2 Insert a disc with printed side facing up into the CD slot. The

disc will be loaded automatically. The unit will check the CD

type and load its track list. The display will show .‘Reading’

3 To eject or reload a CD, press the CD Stop/Eject button. If the

CD is playing you will need to press the button CD Stop/Eject

to stop the CD and then press it again to eject the CD.

1 Press the Play/Pause button to start playing the disc if needed.

2 Adjust the volume.

3 To pause or continue playback, press the Play/Pause button.

4 To stop playback press the CD Stop/Eject button.

Note: If you put the unit into standby mode then the next time

it is switched on, it will return to the previously played track.

1 While the CD is playing or paused select a track by pressing

the or Previous Next Play/Pause. buttons. If needed, press

2 While the CD is playing, on the apply a long press Previous

or Next buttons to search to the desired part of a track.

3 When playing an MP3 / WMA disc you can skip to another folder

using the or Folder Up Down buttons on the remote control.

1 To access the repeat and shufe options whilst the CD is playing

press the button repeatedly (on the remote Repeat/Shufe

control) to select an option. Alternatively, press the Menu button

and select the desired option.

Select

• It is recommended that the DAB band be used wherever possible as better results in terms of quality

and freedom from interference will usually be obtained than on the FM band.

Title:

Magic Lantern

Bluetooth 16.34

Julia’s iPod touch

Select

STEP 4 - Navigating your sound system

STEP 5 - Operating your sound system

Other information

Circuit features

ROBERTS RADIO LIMITED

www.robertsradio.com

Issue 1a

2021-06-15

DAB / DAB+ / FM RDS / Bluetooth / CD / USB

wireless charging sound system

Please read this guide and the safety/warranty leaet before use

Blutune 300 Specications

Power requirements

Mains 100 - 240V 50/60Hz

Remote control batteries 2 x AAA size

USB output 5V / 1A

Headphone socket 3.5mm stereo, Aux In socket 3.5mm stereo

Aerial System - DAB / FM Telescopic aerial

Bluetooth standards A2DP, AVRCP

Bluetooth codecs supported SBC and AAC

Bluetooth EDR EIRP POWER (MAX.) 2.19dBm

Frequency coverage FM 87.5 - 108MHz, DAB 174.928 - 239.200MHz

Bluetooth 5.0 frequencies 2.402 - 2.480GHz

Product markings This symbol indicates AC voltage.

This symbol indicates Class II equipment.

DAB - Listen to DAB radio

FM radio - Listen to FM radio

Bluetooth - Stream music using your smart device

CD - Play music from CD

USB - Play music from a USB memory device

Auxiliary input - Connect to other devices

Remote control battery replacement

Wireless charging

Please read the safety leaet provided before using batteries.

1 Remove the battery cover on the rear of your remote

control by applying pressure to the catch in the

direction shown by the arrow and then lifting off the

cover.

2 Insert 2 x AAA size batteries into the spaces in the

compartment. Take care to ensure all batteries are

inserted with the correct polarity as shown inside the

battery compartment. Replace the battery cover.

3 If the sound system is not to be used for any extended period of time it

is recommended that the batteries are removed from the remote control.

Caution: Replace batteries only with the same or equivalent type. Danger

of explosion if the batteries are incorrectly replaced.

DAB menu USB Mode

FM menu

When in DAB mode, press the Menu

button. The DAB menu items include

Recall Preset, Save Preset, Station

List, Scan, Manual Tune, Prune Invalid,

DRC, Station order, Slideshow (choose

full screen or small image) and System

Settings. **

When in FM mode, press the Menu

button. The FM menu items include Recall

Preset, Save Preset, Scan Setting, Audio

Setting and System Settings. **

System settings

You can access your sound system’s

‘System settings’ from the current menu.

The system settings include Sleep, Alarm,

Equaliser, Time/Date, Backlight, Inactive

Standby, Language, Factory Reset,

Software Update, Software Version and

Loudness. **

In this guide the symbol ** indicates that further details are provided in the on-line user guide available from www.robertsradio.com

1 Switch on your sound system.

2 Press and release the button to access Mode

each of the operating modes in turn.

3 Alternatively, press and rotate the Mode

Tuning control clockwise or anti-clockwise

to highlight the desired menu item. Press the

control to select that item.

4 Press Menu to access the full menu for the

current operating mode.

Select music mode

The name plate is located on the rear of the sound system.

The company reserves the right to amend the specication without notice.

Designed & Engineered in the UK

Made in China

DAB

USB

There are 20 memory presets, 10 for DAB and 10

for FM.** Presets are remembered in the event of

a power failure.

To store a preset

1 Tune to the required radio station.

2 Apply a long press on the Preset/Play/Pause

button (on the unit) or button (remote Select

control). will be displayed.‘Save to Preset’

3 Use the control or the Tuning Menu Up or

Down buttons (remote control) to scroll to an

unused preset or a preset you wish to change.

4 Press the Tuning/Select control or the Select

button (remote control) to save the preset.

To recall a preset

1 Choose DAB or FM mode.

2 Press and release the Preset/Play/Pause

button (on the unit) or button (remote Select

control). will be displayed.‘Preset Recall’

3 Use the control or the Tuning Menu Up or

Down buttons (remote control) to scroll to a

desired preset. Press Tuning Selector the

button (remote control) to select the preset.

Preset radio stations

System reset

Recall Preset

Save Preset

Station List

Scan

Manual Tune

Prune Invalid

DRC

DAB 16.34

> Off

Recall Preset

Save Preset

Scan Setting

Audio Setting

System Settings

FM 16.34

Strong St

Stereo Al

Sleep

Alarm

Equaliser

Time/Date

Backlight

Inactive Standby

Language

System Settings 16.34

Normal

Off

English

If you wish to completely reset your sound system to its initial state perform

a factory reset. Press . Choose Menu ‘System Settings’, ‘Factory Reset’

then ‘YES’. All user entered settings will be erased.

Select

Sound system buttons Remote control buttons

A short press will switch your sound system On or to Standby.

A short press will cancel an active alarm. **

A long press will access the sleep timer when the unit is playing. **

A short press will access each operating mode in turn.

Repeatedly press to change the alarm status when the unit is in standby.

A long press will access the alarm settings when the unit is in standby. **

Alternatively, alarms can be accessed using the system settings menu. **

A short press will access the current menu system when the unit is playing.

Press the Menu / Back button to go back to a higher level menu or if an error is made.

Rotate the control clockwise or anti-clockwise to scroll menu items.

Press Menu Up / Next / Down or Previous buttons on the remote control to scroll menu items.

A short press on Tuning/Select or the Select button (remote control) will select highlighted menu items.

A short press on Tuning/Select or the Select button (remote control) will pause the alarm for the snooze period.

A short press will display information relating to the music being played.

A long press will change dimmer settings when the unit is playing.

A short press will change dimmer settings when the unit is in standby.

The Blutune 300 has been tested with a range of USB memory devices up to

32GB. However there are many different memory devices available and not

all the USB devices can be guaranteed to work in the Blutune 300. Memory

must use the FAT or FAT 32 ling system in order to operate in the Blutune 300.

Important: Your sound system is designed to work with USB ash memory

devices. It is not intended to be connected to hard disk drives or any other

type of USB device. Audio formats supported on USB memory devices are

MP3 and WMA. The USB socket is located on

the back of the unit. **

Carefully insert a USB memory

device into the USB socket. The

USB socket can also be used to

charge your smartphone, tablet

or similar devices.

To select the USB mode, press the button until Mode 'USB' is selected.

Note: Playback control in USB mode is similar to CD-MP3/WMA mode (see

overleaf). Files are played back in the order that they are written to the USB

memory device by your computer except when the shufe mode is used. Press

the Info button to cycle through the various display options.

In order to minimise the risk of damage to your sound system, or USB memory

device, please place the unit so that the device cannot be easily knocked while

it is inserted in the socket. Remove the USB memory device before carrying

the unit or if not using the USB feature for a prolonged period.

Note: The USB memory device should not be removed during playback as

damage or corruption of les may occur.

5V 1A

Equaliser

The sound on your sound system can be adjusted to suit your personal taste for the

material that you are listening to. The radio has six equaliser proles. **

1 Press Menu. Choose ‘System Settings’, ‘Equaliser’ then choose from normal,

classic, jazz, pop, rock or speech. Alternatively, press the Equaliser button on

the remote control and use the or Menu Up Down buttons to select an option.

2 You may set the treble, mid and bass levels using the option.‘My EQ Setup’

3 To use your then ‘My EQ’ ‘Equaliser’ prole choose ‘My EQ’.

In order to minimise its energy consumption when not in use, your sound

system will go into standby if it detects that it is no longer being used.** By

default this period is set to 8 hours but you may change it if you wish. Press

Menu, choose then and then choose ‘System settings’ ‘Inactive Standby’

from 2, 4, 5, 6, 8 hours or Off. Your sound system will go into standby after

the selected time has expired.

Note: If the unit is in the Bluetooth or auxiliary input stop mode position

for more than 15 minutes it will automatically switch to standby. To

use the radio again, simply press the On / Standby button.

1: (Empty)

2: Heart

3: BBC Radio 1

4: (Empty)

5: BBC Radio 2

6: (Empty)

7: (Empty)

Save to Preset 16.34

Preset 2 saved

1 To enable wireless charging ensure your sound

system is plugged into the mains using the

supplied mains lead.

2 Place your wireless charging enabled device

over the charging icon. Your device must have

wireless charging to use this function.

3 Your device will start charging, the charging indicator will show on the

screen. Charging will be faster when your unit is in standby. If the charging

indicator ashes it will have detected a non wireless charging device.

Indicator : Flashes - poor connection, Off - no connection

Solid - connected.

• Charging time will depend on your device. Standby - 15W, On - 5W.

WPT 110-155KHz WPT H-FIELD STRENGTH 30.24 dBμA/3m

Produktspezifikationen

Marke:	Roberts
Kategorie:	Radio
Modell:	Blutune 300
Eingebaute Lautsprecher:	Ja
Akustische Signale:	Ja
USB Anschluss:	Ja
Bluetooth:	Ja
Bluetooth-Version:	5.0
Kabelloses Aufladen:	Ja
Breite:	360 mm
Tiefe:	265 mm
Gewicht:	4565 g
Mitgelieferte Kabel:	AC
Produktfarbe:	Schwarz, Silber
Akku-/Batterietyp:	AAA
Höhe:	138 mm
Radiotyp:	Tragbar
Unterstützte Bänder:	DAB, DAB+, FM
Digitales UKW-Radio:	87.5 - 108 MHz
DAB-Frequenzbereich:	174.928-239.200 MHz
Anzahl voreingestellter Stationen:	20
Radio Data System (RDS):	Ja
RMS-Leistung:	- W
Equalizer:	Ja
Eingebautes Display:	Ja
Sleep-Timer:	Ja
Snooze Funktion:	Ja
Kopfhörerausgänge:	1
Playback MP3:	Ja
Lautstärkeregler:	Drehregler
Antennentyp:	Extern
Verpackungsbreite:	440 mm
Verpackungstiefe:	225 mm
Verpackungshöhe:	335 mm
Paketgewicht:	5965 g
Fernbedienung enthalten:	Ja
Ursprungsland:	China
Verpackungsart:	Geschenkbox
Anzahl unterstützter Akkus/Batterien:	2
USB-Ladeport:	Ja
Fernbedienung:	Ja
Zolltarifnummer (TARIC):	8527911900
Lautsprechertyp:	Voller Bereich
Anzahl Alarme:	2