Rinnai Ultima II REH-311FT Bedienungsanleitung

Rinnai heater Ultima II REH-311FT

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Rinnai Ultima II REH-311FT (27 Seiten) in der Kategorie heater. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/27
This appliance shall be installed in accordance with:
• Manufacturer’s Installation Instructions
• Current AS/NZS 3000 and AS/NZS 5601
• Local Regulations and Municipal Building Codes
This appliance must be installed, serviced and removed by an authorised person.
All Rinnai gasproducts
are A.G.A. certified.
ULTIMA II
Flued Space Heater
Operation / Installation Manual
MODEL REH-311FT(B) - Inbuilt
MODEL REH-311FT(C) - Console
Rinnai Australia i Ultima II Operation Manual
INSTALLATION REQUIREMENTS
This heater must be installed by an authorised person. The installation must conform to local regulations.
The installation must also comply with the instructions supplied by Rinnai.
Service and removal must be carried out by an authorised person.
The Rinnai REH311FT has been certified by the Australian Gas Association.
The AGA Certification Number is shown on the appliance dataplate.
No parts or functions should be modified or permanently removed from the heater.
Please keep these instructions in a safe place for future reference.
CERTIFICATION
Rinnai Australia 1 Ultima II Operation Manual
ABOUT YOUR ULTIMA II
DESIGN LAYOUT
Control panel
STANDBY/ON button
Burner filter
Air inlet louvre
Warm air discharge louvre
Thermistor grill cover
Dress guard
NAVIGATING THE CONTROL PANEL
STANDBY / ON button - used to operate and
stop the heater.
ON / Combustion indicator - when GREEN
appliance is in standby, when RED the burner
is operating and when flashing RED there is a
fault.
UP / DOWN button - used to adjust the SET
temperature, clock and timers and operate the
lock function.
TEMP display -
CURR - indicates the current room
temperature.
SET - indicates the desired room
temperature programmed by the user.
Clock display - displays current time.
MODE display - indicates which mode the
heater is operating in.
SET button - used to programme the heater
operation.
DAY display - displays the current day.
AM/PM indicator - indicates AM or PM of
clock or timer settings.
TIMER display - when the word ‘TIMER’ is
shown the display panel will be showing
current timer settings.
TIMER button - operates timer functions.
PROGRAM display - when the word
‘PROGRAM’ is shown the heater is in
programming mode.
WEEKDAY/WEEKEND display - Indicates
whether the weekday or weekend timers are
being programmed.
AM/PM display - indicates whether AM and/
or PM timer settings are being programmed.
OVERRIDE button - operates the manual
override function.
FILTER display - when shown the filter(s)
require cleaning.
LOCK display - when shown the lock function
is activated.
6
214
5
3
7
1
2
3
4
5
6
7
s u
i0:30
am
t i m e r
G A S E C O N
AM PM
A U T O O F F
11
10
20 18
16
25
1419
23
15
17
2
9
8
121324
2122
2
8
9
10
11
12
13
14
15
16

Produktspezifikationen

Marke: Rinnai
Kategorie: heater
Modell: Ultima II REH-311FT

Brauchst du Hilfe?

Wenn Sie Hilfe mit Rinnai Ultima II REH-311FT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung heater Rinnai

Bedienungsanleitung heater

Neueste Bedienungsanleitung für -Kategorien-