Ridgid RADF-BLK Bedienungsanleitung

Ridgid Lötmaschine RADF-BLK

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ridgid RADF-BLK (12 Seiten) in der Kategorie Lötmaschine. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/12

RADF-BLK

AUTO-

DARKENING

WELDING

HELMET USER

GUIDE OWNERS

MANUAL

RADF-BLK

V1_05.23

ENGLISH

WARNING

• Do not use any welding product without appropriate training.

• These products do not provide any protection from respiratory hazards that may result

from welding processes.

• Arc welding can be hazardous. Protect yourself and others from possible serious injury

or death. Keep children away. Read operating / instruction manual before installing,

operating or servicing this product.

• Never use the auto-darkening lens without the inside and outside lens cover properly

installed. Welding spatter will damage the auto-darkening lens and void the warranty.

Welding helmets do not provide unlimited eye, ear and face protection.

Always wear ANSI Z87.1-2003 compliant safety spectacles in addition to any

welding helmet.

Inspect the auto-lens frequently. Immediately replace any scratched, cracked,

or pitted cover lenses or auto-lenses.

Severe burn injuries may result if these welding helmets are used for heavy-

duty overhead welding applications where there is a potential for falling

molten metal.

Do not attempt to use this welding helmet if there are any cracks, or visible damage to the

structure of the helmet and/or auto-darkening ﬁlter.

Before First Use

Inspect the welding helmet for the following:

1. The front and inside cover lenses are secure under all the tabs.

2. Damage to the inner and outer cover lenses (e.g.; cracks, scratches, pitted, welding

spatter).

3. Test your shade cartridge prior to welding by directing the front of the cartridge toward

a bright source of light. Then, using your ﬁngers, rapidly cover and uncover the sensors.

The cartridge should darken momentarily as the sensor is exposed. A torch striker can

also be used.

The welding helmet should be adjusted to ensure it is positioned over the eyes and face

to ensure adequate protection.

Adjust Headgear for Proper Fit

1. Headgear tightness – Push down and rotate the knob located on the back of the

headgear left or right.

2. Distance from helmet to face adjustment - Loosen the tension knob on both sides

and slide forward or back to desired position ensuring equal distance on both sides

of the headgear. Note! Make sure both sides are equally positioned for proper

operation.

3. Head size adjustment - Adjust headgear for proper depth on the head for correct

stability and balance.

4. View angle adjustment - Loosen the tension knob on the right side of the helmet, lift

and reposition the lever forward or backward to the desired position.

Produktspezifikationen

Marke:	Ridgid
Kategorie:	Lötmaschine
Modell:	RADF-BLK

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ridgid RADF-BLK benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Lötmaschine Ridgid

Ridgid RADF-CAM Bedienungsanleitung

24 September 2024

Ridgid RADF-BLK Bedienungsanleitung

24 September 2024

Ridgid RADF-RID Bedienungsanleitung

24 September 2024

Ridgid RT-100 Bedienungsanleitung

8 August 2024

Bedienungsanleitung Lötmaschine

Neueste Bedienungsanleitung für -Kategorien-

Stamos S-LS-4 Bedienungsanleitung

16 Oktober 2024

Stamos S-LS-1 Bedienungsanleitung

16 Oktober 2024

Stamos S-LS-16 BASIC Bedienungsanleitung

15 Oktober 2024

Stamos S-LS-17 Bedienungsanleitung

15 Oktober 2024

Stamos S-LS-12 Bedienungsanleitung

15 Oktober 2024

Stamos S-LS-73 Bedienungsanleitung

15 Oktober 2024

Stamos S-LS-6 Bedienungsanleitung

15 Oktober 2024

Stamos S-LS-72 Bedienungsanleitung

15 Oktober 2024

Stamos S-LS-10 Bedienungsanleitung

15 Oktober 2024

Stamos S-LS-68 Bedienungsanleitung

15 Oktober 2024