Rel Studio Bedienungsanleitung

Rel Lautsprecher Studio

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Rel Studio (12 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 20 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
1
1
REL
Operating Instructions
STUDIO
Sub-Bass System
REL Acoustics Ltd
North Road, Bridgend Industrial Estate,
Bridgend, Mid-Glamorgan, CF31 3TP.
Telephone: 01656 768777; International : +44 1656 768777
Fax : 01656 766093; International ; +44 1656 766093
2
WELCOME
Thank you for buying the REL STUDIO Sub Bass system. STUDIO
has been carefully hand crafted from the finest materials available
and we are sure that it will give you many years of listening
pleasure. This manual contains important safety information as
well as helpful advice and should be carefully studied before
connecting up.
WARRANTY
At REL we believe in an easy to understand Warranty. STUDIO is
covered by a 2 year Warranty (UK Mainland only) which covers both
parts and labour. Damage caused by either physical or electrical
abuse is NOT covered by this Warranty. Overseas buyers should
check with their local Dealer/Distributer for the Warranty cover
provided.
Should the STUDIO unit give you a problem, please contact your
Dealer who will be able to make whatever arrangements are
necessary to correct it.
SERVICE AFTER WARRANTY
Please contact your Dealer in the first instance before returning any
product direct to us. Should the unit need to be returned for any
reason, all carriage costs will be payable by the Customer. Losses
or damage caused during transit are the Customer’s risk.
3
CONNECTING UP
Always switch off your system before disconnecting any wires.
To increase the choice and versatility of connecting STUDIO to your system, a set of
three gold plated 4mm plugs is included. These will accept large diameter speaker
cables and will allow you to join the STUDIO signal cable with your existing speaker
cables, if desired.
The identification of the signal interconnect cable colour coding is as follows:-
Red wire to RED banded plug
Yellow wire to RED banded plug
Black wire to BLACK banded plug
STUDIO has two independent XLR sockets. This is to facilitate use with both
professional and domestic equipment. The 600 Ohm balanced line input is the
one intended for professional use. It also has a much higher sensitivity.
Alternatively, it can be used with domestic equipment where there is either a
dedicated low bass (sub-woofer) output on the amplifier or a separate line level
output on the preamp. In these cases it is normally used unbalanced, i.e. only one
of the input arms is used.
The other XLR input is intended for use with domestic equipment where the output
is taken from the power amplifier’s speaker outputs. This does have the advantage
of ensuring that STUDIO receives exactly the same signal as the main speakers.
This ensures that the character of the bass from the main system is carried
forward into the sub-bass . This is a very important point and together with the
STUDIO’s Active Bass Controller (ABC) ensures far superior system integration of
the sub-bass with the main system.
Screw the spikes into the feet of the sub-woofer, level them up or if necessary
compensate for an uneven floor. It is important that all 4 spikes are located
securely and that there is no tendency for STUDIO to rock. If it does rock, simply
adjust one (or more) of the spikes until it fits securely.


Produktspezifikationen

Marke: Rel
Kategorie: Lautsprecher
Modell: Studio

Brauchst du Hilfe?

Wenn Sie Hilfe mit Rel Studio benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher Rel

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-