RCF HDL 35-AS Bedienungsanleitung

RCF Lautsprecher HDL 35-AS

Lesen Sie kostenlos die šŸ“– deutsche Bedienungsanleitung fĆ¼r RCF HDL 35-AS (28 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war fĆ¼r 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/28
OWNER MANUAL
ACTIVE
LINE ARRAY MODULE
ACTIVE SUBWOOFER
ARRAY MODULE
HDL 26-A
HDL 35-AS
GENERAL SAFETY INSTRUCTION AND WARNINGS
IMPORTANT NOTE
Before connecting using or rigging the system, please read this instruction manual carefully and keep it on hand for
future reference. The manual is to be considered an integral part of the product and must accompany the system when
it changes ownership as a reference for correct installation and use as well as for the safety precautions. RCF S.p.A. will
not assume any responsibility for the incorrect installation and/or use of the product.
WARNING
ā€¢ To prevent the risk of ļ¬re or electric shock, never expose this equipment to rain or humidity.
ā€¢ The system HDL line arrays should be rigged and ļ¬‚own by professional riggers or trained personnel under
professional riggersā€™ supervision.
ā€¢ Before rigging the system carefully read this manual.
SAFETY PRECAUTIONS
1. All the precautions, in particular the safety ones, must be read with special attention, as they provide important
information.
2. Power supply from mains. The mains voltage is sufļ¬ciently high to involve a risk of electrocution; install and connect
this product before plugging it in. Before powering up, make sure that all the connections have been made correctly
and the voltage of your mains corresponds to the voltage shown on the rating plate on the unit, if not, please
contact your RCF dealer. The metallic parts of the unit are earthed through the power cable. An apparatus with
CLASS I construction shall be connected to a mains socket outlet with a protective earthing connection. Protect the
power cable from damage; make sure it is positioned in a way that it cannot be stepped on or crushed by objects. To
prevent the risk of electric shock, never open this product: there are no parts inside that the user needs to access.
3. Make sure that no objects or liquids can get into this product, as this may cause a short circuit. This apparatus
shall not be exposed to dripping or splashing. No objects ļ¬lled with liquid, such as vases, shall be placed on this
apparatus. No naked sources (such as lighted candles) should be placed on this apparatus.
4. Never attempt to carry out any operations, modiļ¬cations or repairs that are not expressly described in this manual.
Contact your authorized service centre or qualiļ¬ed personnel should any of the following occur:
- the product does not function (or functions in an anomalous way).
- the power cable has been damaged.
- objects or liquids have got in the unit.
- the product has been subject to a heavy impact.
5. If this product is not used for a long period, disconnect the power cable.
6. If this product begins emitting any strange odours or smoke, switch it off immediately and disconnect the power
cable.
7. Do not connect this product to any equipment or accessories not foreseen.
For suspended installation, only use the dedicated anchoring points and do not try to hang this product by using
elements that are unsuitable or not speciļ¬c for this purpose. Also check the suitability of the support surface to
which the product is anchored (wall, ceiling, structure, etc.), and the components used for attachment (screw
anchors, screws, brackets not supplied by RCF etc.), which must guarantee the security of the system / installation
over time, also considering, for example, the mechanical vibrations normally generated by transducers.
To prevent the risk of falling equipment, do not stack multiple units of this product unless this possibility is speciļ¬ed
in the user manual.
8. RCF S.p.A. strongly recommends this product is only installed by professional qualiļ¬ed installers (or specialised
ļ¬rms) who can ensure correct installation and certify it according to the regulations in force.
The entire audio system must comply with the current standards and regulations regarding electrical systems.
9. Supports and trolleys.
The equipment should be only used on trolleys or supports, where necessary, that are recommended by the
manufacturer. The equipment / support / trolley assembly must be moved with extreme caution. Sudden stops,
excessive pushing force and uneven ļ¬‚oors may cause the assembly to overturn.
10. There are numerous mechanical and electrical factors to be considered when installing a professional audio system
(in addition to those which are strictly acoustic, such as sound pressure, angles of coverage, frequency response,
etc.).
11. Hearing loss.
Exposure to high sound levels can cause permanent hearing loss. The acoustic pressure level that leads to hearing
loss is different from person to person and depends on the duration of exposure. To prevent potentially dangerous
exposure to high levels of acoustic pressure, anyone who is exposed to these levels should use adequate protection
devices. When a transducer capable of producing high sound levels is being used, it is therefore necessary to wear
ear plugs or protective earphones. See the manual technical speciļ¬cations to know the maximum sound pressure
level.
To prevent the occurrence of noise on line signal cables, use screened cables only and avoid putting them close to:
- Equipment that produces high-intensity electromagnetic ļ¬elds.
- Power cables
- Loudspeaker lines.
OPERATING PRECAUTIONS
- Place this product far from any heat sources and always ensure an adequate air circulation around it.
- Do not overload this product for a long time.
- Never force the control elements (keys, knobs, etc.).
- Do not use solvents, alcohol, benzene or other volatile substances for cleaning the external parts of this product.
GENERAL OPERATING PRECAUTIONS
ā€¢ Do not obstruct the ventilation grilles of the unit. Situate this product far from any heat sources and always ensure
adequate air circulation around the ventilation grilles.
ā€¢ Do not overload this product for extended periods of time.
ā€¢ Never force the control elements (keys, knobs, etc. ).
ā€¢ Do not use solvents, alcohol, benzene or other volatile substances for cleaning the external parts of this product.
CAUTION
To prevent electric shock hazard, do not connect to mains power supply while grille is removed

Produktspezifikationen

Marke: RCF
Kategorie: Lautsprecher
Modell: HDL 35-AS

Brauchst du Hilfe?

Wenn Sie Hilfe mit RCF HDL 35-AS benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Lautsprecher RCF

RCF

RCF MR 40 Bedienungsanleitung

13 Oktober 2024
RCF

RCF S 5012 Bedienungsanleitung

23 September 2024
RCF

RCF C3108-126 Bedienungsanleitung

5 September 2024
RCF

RCF ART 732-A MK4 Bedienungsanleitung

2 September 2024
RCF

RCF HD 15-A Bedienungsanleitung

20 August 2024
RCF

RCF P 3108 Bedienungsanleitung

13 August 2024
RCF

RCF BS 8 Bedienungsanleitung

11 August 2024
RCF

RCF ART 708-A MK4 Bedienungsanleitung

11 August 2024
RCF

RCF MR 44WT Bedienungsanleitung

10 August 2024
RCF

RCF EVOX JMIX8 Bedienungsanleitung

10 August 2024

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung fĆ¼r -Kategorien-

Sonance

Sonance Visual Performance VP65 SST Bedienungsanleitung

16 Oktober 2024
Bowers And Wilkins

Bowers And Wilkins CWM664 Bedienungsanleitung

16 Oktober 2024
Focal

Focal Chorus 826 V Bedienungsanleitung

16 Oktober 2024
KEF

KEF Ci200ER Bedienungsanleitung

16 Oktober 2024
Steren

Steren SPK-1100BL Bedienungsanleitung

16 Oktober 2024
Aiwa

Aiwa SP-A100 Bedienungsanleitung

16 Oktober 2024
Trust

Trust GXT 628 Bedienungsanleitung

15 Oktober 2024
Pyle

Pyle PBMSPG6 Bedienungsanleitung

15 Oktober 2024
Marshall

Marshall Tufton Bedienungsanleitung

15 Oktober 2024
Sunstech

Sunstech SPUBT780 Bedienungsanleitung

15 Oktober 2024