RCA LED32B30RQ Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für RCA LED32B30RQ (4 Seiten) in der Kategorie Fernsehen. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/4
LED LCD TV
User's Manual
English
Part No.: RN0332R0189
MADE FOR TODAY
LED32B30RQ
MODEL
Date of Purchase
Please register your product at
www.rca.com
Please keep your sales receipt and keep the record of the serial number
and the date of purchase in order to receive warranty parts and service.
The serial number is located at the back of the TV.
Serial Number
Congratulations on your purchase! As you enjoy your new product,
please keep these safety tips in mind :
The Issue
The home theater entertainment experience is a
growing trend and larger flat panel displays and
popular purchases.
However, flat panel displays are not always supported
on the proper stands of installed according to the
manufacturer’s recommendations.
Flat panel displays that are inappropriately situated
on dressers, bookcases, shelves, desks, speakers,
chests or cats may fall over and cause injury.
1 2 2 3
Wall Mounting :
IF YOU DICIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS :
- Use a mount that has been recommended by the display manufacturer and/or listed by an independent
laboratory (such as UL,CSA,ETL).
- Follow all instructions supplied by the display and wall mount manufacturers.
- If you have any doubts about your ability to safely install your flat panel display, contact your retailer about
professional installation.
- Make sure that the wall where you are mounting the display is appropriate. Some block construction. If you are
unsure, contact a professional installer.
- A minimum of two people are required for installation. Flat panel displays can be heavy.
This Manufacturer Cares!
The consumer electronics industry is committed to
making home entertainment enjoyable and safe.
Tune Into Safety
- One size does NOT fit all. follow the manufacturer's
recommendation for the safe installation and use of
your flat panel display.
- Carefully read and understand all enclo sed
instructions for proper use of this product.
- Don't allow children to climb on or play with
furniture and television sets.
- Don't place flat panel displays on furniture that can
easily be used as steps, such as a chest of drawers.
- Remember that children can become excited while
watching a program, especially on a "larger than life" flat
panel display. Care should be taken to place or install
the display where it cannot be pushed, pulled over, or
knocked down.
- Care should be taken to route all cords and cables
connected to the panel display so that they cannot be
pulled or grabbed by curious children.
Caution and Warning
!
CHILD
SAFETY
It makes A Difference How and Where
You Use Your Flat Panel Display
Child Safety Guide
CONTENTS
¡Muchas gracias por su uso del presente producto!
Cuando usted disfruta de su nuevo producto, por favor tenga
en cuenta los consejos de seguridad:
Posibles Problemeas
- La experiencia de entretenimiento de cine en casa
es una tendencia creciente y los grandes monitores
de pantalla plana son muy populares.
embargo, los monitores de pantalla plana no se
han instalado siempre en los soportes adecuados o
instalado de acuerdo con las recomendaciones de
fabricante.
- Los monitores de pantalla plana que se han
instalado inadecuadament en tocadores, estanterías,
estantes, escritorios, oradores, baúle s o carros se
pueden caer y causar el daño corporal.
Montaje de Pared:
SI USTED DECIDE A MONTAR SU MONITOR DE PANTALLA PLANA LA PARED, SIEMPRE
- Use una montura que se ha recomendadop or el fabricante de monitor y/o listado por un laboratorio
independiente(como U L, CSA, ETL).
- Siga todas las instrucciones ofrecidas por eI fabricante de monitor y montaje de pared.
- Si usted tiene cualquier duda sobre su habilidad para instalar seguramente su monitor de pantalla plana,
contacte a su distribuidor para la instalación profesional.
- Compruebe que la pared adonde se está montando el monitor es adecuada. Algunos montajes de la pared
no son diseñados para ser montados a paredes con tachones de acero o la vieja construcción de bloque de
ceniza. Si usted está inseguro, contacte a un instalador profesional.
- Por lo menos dos personas se requieren para la instalación. Los monitores de pantalla plana puede ser pesados.
¡Al Fabricante le Importa
- La industria electrónica del consumidor está
comprometida a hacer el entretenimiento de casa
agradable y seguro.
Ajustar Hasta Seguridad
- Un tamaño fijo NO es adecuado para todos. siga las
recomendaciones de fabricante para la instalación segura y
el uso de su monitor de pantalla plana
- Lea con cuidado y entienda todas las instrucciones
adjuntas para el uso propio de este producto.
- No permita a los niños a subir al equipo o jugar con
muebles y televisiones.
- No cloque los monitores de pantalla plana en el mueble
quese puede usar fácilmente como escalón, así como una
cómoda.
- Recuerde que los niños pueden llegar a ser excitados al ver
una programación, especialmente en el monitor de pantalla
plana "más grande que vida". El cuidado se tiene que
empezar por poner o instalar el moniotr donde no se puede
empujar, detener al castado del camino ni echar abajo.
- El cuidado se tiene que empezar por encaminar todos
los cordones y cables conectados al monitor de pantalla
plana para que no se puedan tirar o agarrar conectados
al monitor de pantalla plana para que no se pueden tirar o
agarrar por los niños curiosos.
!
SEGURIDAD
DE NIÑOS:
El Cómo y Doónde Usted usar Su
Monitor de Panntalla Plana
Marca La Diferrencia
FCC Notice
Guía de seguridad para niños
Fcc Information
This equipment has been tested and f ound to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
Th is eq uip me nt ge ne rat es, use s and can rad iat e rad io
frequency energy and, if not installed and used in accordance
with the instructions, may ca use harmful interference to radio
Communications.
However, there is no Guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmf ul interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
Device complies with FDA radiation performance standards, 21
CFR subchapter.
Caution: (Invisible) Laser Radiation when open.
Do not stare into beam.
Choose Your Connections
TV LED32B30RQ supports various connections to other devices
(such as DVD, VCR, Set-top box, etc.). Please follow the table to
choose the cables which adapt to your device.
Caution: Unplug the AC cord when you connect other devices to
TV.
Connecting AV Composite device
(Good Video Quality)
Composite connector will be shared with Component Y connector.
To connect a composite AV device, such as a DVD player, follow
these steps:
1.Connect the COMPOSITE jack on the side of TV to the video
output jacks of device via video cable (yellow).
2.Connect the L-AUDIO-R jacks on the side of TV to the audio
output jacks of device via audio cable.
Notice the left channel jack and plugs are white and the right
channel jack and plugs are red.
Note: AV signal belongs to composite video. This kind of video
signal has regular good display quality.
Composite Video Connection
The picture below is an example of a connection using the
composite video jack.
The first step in connecting your TV is obtaining the signal. Your
TV LED32B30RQ has a back panel, which allows you to receive
analog and/or digital television channels via ANT/CABLE jack.
Before connecting your TV, determine using an antenna or a cable
service to obtain the signal.
A. Antenna
Connect the antenna to TV via coaxial cable on ANT/CABLE jack
of the back panel. You are ready to receive air local digital and
analog channels.
B. Cable TV service
Connect the cable TV wall jack to TV via coaxial cable on
ANT/CABLE jack of the back panel. You are ready to receive off-air
local digital and analog channels.
C. Set-Top Box
If you use a set-top box, you may need to call your cable company
or satellite service provider, which use a special connection, please
refer to the user’s guide of set-top box.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water. For example, do not use
near a laundry tub, in a wet basement, or near a swimming pool,
and the like.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions. Slots and openings in the cabinet
back or bottom are provided for ventilation, to ensure reliable
operation of the TV and to protect it from overheating. These
openings must not be blocked or covered. The openings should
never be blocked by placing the TV on a bed, sofa, rug, or other
similar surface.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than the
other. A grounding-type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your
safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11. Only use attac hmen ts/a cces sori es spe cifie d by the
manufacturer.
12. Use only with cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
A TV and cart combination should be moved with care. Quick
stops, excessive force, and uneven surfaces may cause the TV and
cart combination to overturn.
13. Unplug this apparatus during lightning storms or when unused
for long periods of time.
For added protection for this TV receiver during a lightning storm,
or when it is left unused for long periods of time, unplug it from the
wall outlet and disconnect antenna or cable system.
This will prevent damage to the TV due to lightning and power line
surges.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
15. This TV should be operated only from the type of power supply
indicated on the rating label.
If customer is not sure the type of power supply in your home,
consult your appliance dealer or local power company. For TV
remote control battery power, refer to the operating instructions.
16. The TV set shall not be exposed to dripping or splashing. No
objects filled with liquids, such as vases, shall be placed on the TV set.
HEAD PHONE:
Connect a 3.5mm headphone for personal audio.
USB: Connect your USB storage device to enjoy music/photo files
on your TV. (Also used for service purpose).
COMPONENT Y/Pb/Pr: Connect a device that has component
video jacks, such as a DVD player. To access device connected
to the Y/Pb/Pr jack, press the INPUT button on your remote; then
press the up/down arrow to select Component. Press the OK
button at last to confirm.
Y/Pb/Pr (Component Video): They provide good picture quality
because the video signal is separated into three components. Use
three video-grade or component video cables for the connection.
When using Y/Pb/Pr, make sure you connect left and right audio
cables to the AUDIO IN R/L jacks.
L-AUDIO-R, COMPOSITE:
Connect an AV device that has
composite video jacks, such as a VCR or a DVD player. To access
device connected to these jacks, press the INPUT button on your
remote; then press the up/down arrow to select AV. Press the
OK button at last to confirm.
AUDIO IN L: Left audio channel connection. The left audio
connector is usually white. For mono audio sources, be sure to
use the left AUDIO INPUT.
AUDIO IN R:
Right audio channel connection. The right audio
connector is usually red.
ANT/CABLE: Connect to receive the signal from your antenna or
cable via coaxial cable.
Digital Audio out: Connect a coaxial
cable for digital audio
output.
Connecting HDMI device(Best Video Quality)
To connect a HDMI device, such as a DVD player, please Connect
the HDMI1/DVI/MHL, 2/ARC jack on the side of TV to the output
jacks of device via HDMI cable.
To connect a DVI device, via DVI port of PC or Device and HDMI
jack of TV:
Front Panel
Power/Standby Indicator: Light up in red when the TV is in
standby mode. Light out when the TV is on.
Remote Control Sensor: Remote control IR sensor, which
receives infrared ray sent by remote control.
Codes for Cox Communications: 0178
Codes for Comcast: 10178
Codes for Dish Network: 627
Codes for Fios Verizon: 0205, 0057, 0493, 0775
Keypad Buttons
If you cannot locate your remote, you can use the keypad buttons
on your TV to operate many TV features.
Connecting YPbPr Component device
(Better Video Quality)
To connect a component device, such as a DVD player, follow
these steps:
1.Connect the COMPONENT IN Y/Pb/Pr jack on the side of TV to
the video output jacks of device via video cable (green, blue and
red).
2.Connect the L-AUDIO-R jacks on the side of TV to the audio
output jacks of device via audio cable.
Notice the left channel jack and plugs are white and the right
channel jack and plugs are red.
Note: Y/Pb/Pr jacks are component video. This kind of video signal
has better display quality.
Component Video Connection
The picture below is an example of a connection using the component
video jack.
17. Never push objects of any kind into this TV through openings
as they may touch dangerous voltage or other electrical parts that
could result in fire or electric shock. Never spill liquid of any kind into
the TV.
18. Unplug the TV from the wall outlet before cleaning. Do not use
liquid or aero cleaners. Use a damp cloth for cleaning.
19. This TV should never be placed near or over a radiator or heat
resource. This TV should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided or the
manufacturer's instructions have been adhered to.
20. Do not place this TV on an unstable cart, stand, tripod, bracket,
or table. The TV may fall, causing serious injury to someone, and
serious damage to the appliance.
21. Do not attempt to service this TV by yourself because opening
or removing covers may expose you to dangerous high voltage or
other hazards. Refer all servicing to qualified service personnel.
22. This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
23. WARNING: To prevent injury, this apparatus must be securely
attached to the floor/wall in accordance with the installation
instructions.
24. To reduce the risk of electric shock, the grounding of center pin
of plug must be maintained.
25. If an outside antenna or cable system is connected to the TV,
be sure the antenna or cable system is grounded to provide some
protection against voltage surges and built-up static charges.
Section 810 of the National Electrical Code, ANSI/NFPA NO.70,
provides information with respect to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location of
antenna discharge unit, connection to grounding electrodes, and
requirements for the grounding electrodes. (See figure A)
54 5 6
6 7
Remote Control Sensor
Power/Standby Indicator
Safety Strap
Caution: Pushing, pulling or climbing on the TV may cause the TV
falling. Do not let children climb or hang on the TV. Always place the
TV on a sturdy, level, stable surface that can hold the weight of TV.
And if possible, secure the TV according to the instruction below
(Note: The fastening components such as screws are not supplied
with TV).
Step one: Insert the M6 mounting screws into the upper two wall
mounting screw holes and fasten them (Figure B).
Step two: Insert anchors to wall and connect the bolts and anchors
with ropes or chains (Figure C).
Before Turning On TV
Check Accessories
Check the accessories that are packed with your TV.
(refer to Quick Start Guide)
Setup TV Table Stand
Please refer to Quick Start Guide to carry out stand installing.
Select TV Location
Select a flat, stable table to place your TV set. Please follow the
safety instructions when placing the TV.
Connection and Using
After placing your TV properly, you can connect the TV with power
supply and cable components. For further information, see page 5
to page 6.
1. Connect the HDMI1/DVI/MHL jack on the side of TV to the DVI
port of PC via HDMI-DVI cable.
2. Connect the L-AUDIO-R jack on the side of TV to the audio
output jack of computer with audio cable (dual-channel RCA jacks
to 3.5mm stereo jack or the L-AUDIO-R jack).
Note: 1. HDMI (High-Definition Multimedia Interface) is a compact
audio/video interface for transmitting uncompressed digital data. It
carries the audio and video signal via the same cable and has the
best display quality.
2. HDMI-DVI cable transfers only video signal from DVI port of
DVI device to HDMI jack of TV. For audio signal, please connect
audio output to L-AUDIO-R jack on TV back panel.
HDMI Connection
The picture below is an example of a connection using the HDMI
video jack.
Turning On and Off
Connect the AC cord to power the LED LCD TV. At this time the
TV will enter standby mode and power indicator will turn red. Use
Power button ( ) on the top panel of TV or on the remote control
to turn on the TV. After switching off the TV for 5 seconds, you can
turn on TV again.
Choosing TV Channel
Tuning To Analog Channels
an analog channel has a channel number beginning with “A”.
Input the digital number with numeric buttons directly and press
OK button to confirm. For example, to watch analog channel “A51”,
press “5”, “1”, “OK” on remote control in sequence.
Note: Although there is no analog TV signal available in America,
we reserve ATV functions for some expansible use.
Tuning To Digital Channels
Selecting Input Source
Pre ss INPU T but ton on rem ot e
control to display Source Select list.
Use up/down arrows to highlight the
source you need and press OK to
confirm.
About remote control
working distance and
angle, see the
start guide.
quick
Keypad and Front Panel
TV Jacks Explanation
Side Panel Connections
Cable Connections
Preparation for Your New TV
TV Signal Connection
Safety Precautions
Basic Operations
How to Obtain Various Kinds of Input Sources
After connection is done, press INPUT button on remote control
or TV top panel to choose the input source you need. See page 7,
Basic Operation of TV.
Displays the Source Select List.
Displays the TV Main Menu.
Scans up through the channel list.
In the TV menu system, it acts like the up arrow on the
remote control and can be used to select menu options.
Scans down through the channel list. In the TV menu
system, it acts like the down arrow on the remote
control and can be used to select menu options.
Increases the volume. In the TV menu system, it acts
like the right arrow on the remote control and can be
used to select menu options.
Decreases the volume. In the TV menu system, it acts
like the left arrow on the remote control and can be used
to select menu options.
Turns the TV on and off.
Note: Do not plug the AC cord until you have accomplished all the
connections. This TV does not support QAM under cable channel
search.
To connect an ARC HDMI OUT device, please connect to the HDMI
input port of the device such as amplifier,
HDMI IN
HDMI1/DVI, 2: (High-Definition Multimedia Interface) It provides an
uncompressed digital connection that carries both video and audio
data by way of an integrated mini-plug cable.
MHL: (Mobile High-Definition Link) To standard HDMI input, transmit
the video/audio from portable electronic device (cellphone,digital
camera, digital-video camera) to TV set.
ARC: (Audio Return Channel)
Adopted in TV output of digital audio, can
be connected to the device supporting ARC, transmit the TV sound to the
device.
USB
Move SelectOK
6
6
A digital channel has a channel number beginning with “D”. Input
the main digital number with numeric buttons directly, then press
“-” button on remote control, and input the sub number at last.
For example, to watch analog channel “D31-1”, press “3”, “1”, “-”,
“1”, “OK” on remote control in sequence.
Changing Channels Directly You can use CH button to increase
channel number and CH to decrease channel number.
When no OSD (On Screen Display) is used, the up/down arrows
can also work as CH /CH buttons.
07
07
Channel Bar 08
Adjusting Volume 08
EPG (Electronic Program Guide) 08
Selecting Input Source 07
OSD Menu Operations 08
Turning On and Off
Choosing TV Channel
Basic Operations
Child Safety Guide 02
Caution and Warning 02
Safety Precautions 04
Cable Connections 05
Side Panel Connections 05
Connecting AV Composite video device 05
TV Signal Connection 05
Connecting YPbPr Component device 06
Keypad and Front Panel 07
Connecting HDMI device 06
Keypad Buttons 07
How to obtain various kinds of Input Sources 06
Front Panel 07
TV Jacks Explanation 06
Check Accessories 05
Setup TV Table Stand 05
Select TV Location 05
Preparation for Your New TV 05
Connection and Using 05
07
08
08
11
13
09
08
12
14
09
08
14
10
10
Picture Menu
Adjust the OSD Screen
Frequently Asked Questions (FAQs)
Audio Menu
Quick Menu
Troubleshooting
Time Menu
Channel Menu
Setup Menu
Lock Menu
Warranty Card
Wall Mounting Unit Specification
USB Media Play
Product Specification
13
HDMI, the HDMI logo, and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC
Note: HDMI, the HDMI logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC
Digital Caption Type
Press left/right arrow to select digital closed caption type:
Service1, Service2, Service3, Service4, Service5, Service6.
Digital Caption Style
Press left/right arrow to go to digital closed caption style sub-menu,
to select the closed caption style. Select the item you want to adjust
in Digital CC Style menu with up/down arrows. After changing, you
can preview the caption style in the bottom.
• Mode: Decide whether you can change the settings on the CC
Display Style.
• CC Size: Set the CC font size (Default, Normal, Large, Small).
• CC Font: Set the CC font (Default, Font 0 - 7).
• CC Opacity Color: Set the CC opacity color (Default, Solid,
Flashing, Translucent, Transparent).
• Text Color: Set the CC text color (Default, White, Red, Green,
Blue, Yellow, Magenta, Cyan).
• CC Background Opacity: Set the CC background opacity (Default,
Solid, Flashing, Translucent, Transparent).
• CC Background: Set the CC background color (Default, White,
Red, Green, Blue, Yellow, Magenta, Cyan).
All reset
Press
OK
button to execute reset to TV system. All the settings
will be reset to factory default.
Note: The OSD’s appearance and color are referred to the actual
appliance.
Blue Back
Press
OK
button to select Blue Back on or off. If the Blue Back is
turned on, the TV will display a blue background when there is no
signal input.
No Signal Power Off
Press left/right arrow to select a time period (Off, 1 Min, 5 Min, 10
Min) for “No Signal Power Off”. The TV will shut off after that period
of time while no signal. We suggest you turn on this function when
Blue Back is turned on. It may hurt the LED LCD panel if blue screen
is on for too long.
Parental Control
• When the Parental Control Menu is accessed from the Main Menu,
you need to enter password to unlock the menu function. Please
enter your four-digit password with numeric keys 0~9. Note: The
original password is “0000”.
• After unlocking, the items in parental control menu can be used.
Use arrow up/down to highlight the function you need and press
OK
or right arrow to use V-chip, Change Password, Keypad Lock
and Source Lock, Clear Channel List sub-menu.
Audio Menu
The Audio Menu lets you adjust audio output. To access the
Audio Menu, press MENU on the remote, and then select Audio
from the Main Menu. Press
OK
/down button to proceed to Audio
menu.
Use up/down to choose the function you need, press
OK
or right
arrow to adjust or enter a sub-menu. The detailed explanation are
shown below.
Sound Mode
Choose the preset sound mode of your TV:
Standard, Soft, User, Dynamic. Only in User mode you can adjust
Bass, Treble, Balance.
• Bass: Adjust the bass component of TV sound.
• Treble: Adjust the treble component of TV sound.
• Balance: Adjust the balance between the left and right channel.
Audio Language
Select digital TV audio language type: English, French or Spanish
(only available for DTV channel).
Analog Audio Output
Select analog TV audio sound type: Stereo, SAP or Mono (only
available in TV mode).
Digital Audio Output
Set the audio output type as Off, PCM or Raw. Please set this
option according to your power amplifier.
Surround
Creates a 3D sound surround from standard stereo material, with
deep and rich enhancement.
Audio Only
Press
OK
button to activate audio only mode. The TV will
output only
sound and the LED LCD panel will be turned off. To restore normal
playing, hold POWER button for three seconds.
Auto Volume
Set auto volume control on/off.
Equalizer Settings
The seven-band graphic equalizer allows you to adjust the audio
frequency settings. You can select one of the equalizer presets
(Off, Pop, Rock, Jazz) or create your own personal preset (User).
Press the left or right arrow to select the frequency (100Hz, 250Hz
500Hz, 1KHz, 2KHz, 4KHz, 10KHz). you want to adjust. Use the
up or down arrow to adjust.
Channel Menu
The Channel Menu enables you to search, view and edit channels.
It is available in TV mode only. Press MENU and choose CHANNEL
from the Main menu. Press the
OK
/down button to proceed to
CHANNEL menu.
Quick Menu
The Quick Menu contains menus and provides you a quick way to
approach the main settings that may be most possibly and frequently
approached. Press MENU on the remote and then you will see the
Quick Menu showing on your screen. Press the down button to
proceed the Quick Menu. Use up/down to choose the function you
need, press OK to enter a sub-menu and press left/right arrow to
adjust a sub-menu.
US V-Chip
Press
OK
to enter US V-Chip ratings menu, which contains two
sub-menus: TV rating and Movie Rating.
Change PIN
Change the PIN of parental menu.
Movie Rating
Use arrow keys to select the rating level you want to block, press
OK
to lock/unlock the rating level. If you have blocked a lower level
rating, the higher ratings will be blocked too. For example, when
PG-13 is blocked, R, NC-17 and X will be blocked at the same
time.
TV Rating
Similar with Movie Rating. After adjusting, press MENU to return
or press EXIT to exit the menu.
Canada V-Chip
Press
OK
or right arrow to enter Canada V-Chip ratings menu, which
contains two sub-menus: English Rating and French Rating.
English Rating
Press
OK
to enter English rating menu. Use arrow keys to select the
rating level you want to block, press
OK
to lock/unlock the rating
level. If you have blocked a lower level rating, the higher ratings will
be blocked too. For example, when PG is blocked, 14+ and 18+ will
be blocked at the same time.
French Rating
Press
OK
to enter French rating menu. Similar with English
Rating.
Note: These ratings are available only if the broadcaster is sending
rating information.
Picture Menu
The Picture Menu contains menus and controls to configure the
way the picture appears. The Picture Menu options apply to the
video for the main TV and VIDEO INPUT selections. All picture
options can be applied to each input.
Press MENU on the remote. Select Picture from the Main menu.
Press the OK/down button to proceed to PICTURE menu.
Use up/down to choose the function you need, press OK or right
arrow to adjust or enter a sub-menu. The detailed explanation are
shown below. If available, use the text at the bottom of each screen
for help.
Use up/down to choose the function you need, press
OK
or right
arrow to adjust or enter a sub-menu. The detailed explanation are
shown below.
Sleep Timer
Set the sleep timer(Off, 5, 10, 15, 30, 60, 90, 120, 180, 240 Min.).
The TV will automatically enter standby mode after times up.
Time Zone
Showing the country’s time zone. you can Set Time zone Off
Eastern, Central, Mountain, Pacific, Alaska, Hawaii, Samoa,
Newfoundland, Atlantic.
Picture Mode
Choose the preset visual mode of your TV:
Standard, Movie, User, Dynamic, Power Saving. (Only in User mode
you can adjust Brightness, Contrast, Color, Tint and Sharpness.
Changes to Power Saving mode can decrease the power
consumption.)
• Brightness: Adjust the brightness of picture.
• Contrast: Adjust the contrast of color.
• Color: Adjust the richness of color.
• Tint: Adjust the balance between red and green level (only
available in NTSC signal).
• Sharpness: Adjust the sharpness level of picture.
Color Mode
This option allows you to select one of three automatic color
adjustments: Cool for a bluer palette of picture colors; Normal or
Warm for a redder palette of color.
Screen Size
Screen Size: Select a screen aspect ratio. (Available ratio: Wide,
Cinema, Zoom, and Normal.) Please choose the ratio that applies
to your video signal format best.
Noise Reduction
Set noise reduction as Off/low/Medium/High.
Note: Noise reduction helps to reduce the picture “static” or any
type of interference. This feature is especially useful for providing a
clearer picture in weak analog signal conditions.
Dynamic Contrast
Set dynamic contrast Off/low/Medium/High.
Video Style
If you connect the HDMI/DVI port of PC to HDMI jack of the TV
and the video signal is 1080p, please choose the compatible
video style: Video, Graphic.
Note: This model doesn’t support Video Style function.
What’s the most convenient way to view High Definition (HD)
video?
Connect an antenna to the TV Input jack to view free local digital
channels. You may need to purchase an antenna. (See page 5 for more
information about antenna setup).
Visit www.antennaweb.org for assistance in deciding what type of
antenna to use to receive the local digital channels available to you.
After entering your location, this mapping program tells you which local
analog and digital stations are available using a certain antenna.
Are there other ways to view High Definition(HD) video?
Besides using an antenna as mentioned above, you can also use a
set-
top box to receive digital video.
Contact your cable service provider or satellite provider to purchase
digital programming and have them connect the box to ensure you are
viewing channels in the best way.
Use up/down to choose the function you need, press
OK
or right
arrow to adjust or enter a sub-menu. The detailed explanation
are shown below.
Auto Scan
Execute an auto channel search.
Show / Hide
Enter sub-menu and press OK to show or hide the TV channel.
Channel List
Displays a channel list. It shows the current channels. Press
OK
to
go to TV channel directly in sub-menu.
Signal Type
Select your TV signal type: Air or Cable.
DTV Signal( In DTV Mode)
Display how strong your TV signal is.
Auto Clock
Select auto clock on/off. Auto clock helps you synchronize your
TV time to standard time (from DTV signal).
Clock
Set your TV time manually (needs to turn off auto clock). press up/
down and left/right arrow to config the current time.
Wake Up
Set the Wake Up time for your TV. after enters menu, you can
use the up/down and left/right arrow on the remote control to
adjust it.
OSD Display Duration
Set the time how long to display OSD menu(5 Sec, 15 Sec, 30 Sec,
45 Sec, 60 Sec).
Setup Menu
The Setup Menu lets you config the TV with your preferences. Select
SETUP from the Main Menu. Press
OK
/down button to proceed to
SETUP menu.
Input Block
This option allows you to lock or unlock the input source. The
source blocked can not be chosen from input list unless you input
the correct parental password. Use up/down arrow to select the
source, press
OK
to lock or unlock it.
V-Chip
Press
OK
to enter V-Chip sub-menu, the detail as follow:
Block Unrated Show
Block all the unrated program.
Clear Downloadable Data
Activate or downloadable rating data. if available.
Use up/down to choose the function you need, press
OK
or right
arrow to adjust or enter a sub-menu. The detailed explanation are
shown below.
Menu Language
To choose your menu language, press the left/right arrow until
the language you need appears. Available languages:
English, French and Spanish.
Menu Transparency
To choose your menu transparency mode, press the left/right
arrow until the transparency you need appears: 0%, 25%, 75%
100%.
Closed Caption
Press
OK
to enter closed caption sub-menu, the detail as follow.
8 9 9 10 1011
Frequently Asked
Questions (FAQs)
Programming generally considered acceptable for
children 8 years and over to watch on their own.
Programming intended for children under age 8.
18+
14+
PG
G
C8+
C
DetailRating
Adult programming
Programming contains themes or content
which may not be suitable for viewers under age of 14.
Parental Guidance
General programming, suitable for all audiences.
General
18ans+
16ans+
13ans+
8ans+
G
DetailRating
Programming restricted to adults.
Programming is not suitable for
children under the age of 16.
Programming may not be suitable for
children under the age of 13.
Programming generally considered acceptable for
children 8 years and over to watch on their own.
Directed to Children 7
Years and Older
All Children
TV-MA
TV-14
TV-PG
TV-G
TV-Y7
TV-Y
FV Fantasy Violence
Age-Based Ratings
Mature Audience Only
Parents Strongly Cautioned
Parents Guidance Suggested
General Audience
DSexually Explicit Dialogue
L Adult Language
S Sexual Situations
V Violence
Content Themes
No children under age 17.
Adults only.
G
PG
PG-13
R
NC-17
X
DetailRating
Rating
General Audience (no restrictions).
Parental guidance suggested.
Parents strongly cautioned.
Restricted. Children under 17
should be accompanied by an adult.
Media Support Specification
Caution: Do not turn off the TV or disconnect USB storage device
while the TV is playing back picture or music.
This may result in loss of data or damage to the USB storage
device, and RCA is not responsible for any damage to, or loss of,
data on the USB storage device.
Notice: Specifications and cabinet design are subject to change without
notice.
Coverage - Labor
For a period of 12 months from date of purchase of your RCA
product, we will pay an authorized RCA service center the labor
charge to repair any defects in materials or workmanship in your
television.If your television is unrepairable we will provide you with a
refurbished unit of the same or better model.
Coverage - Parts
For a period of 12 months from date of purchase of your RCA
product, we will pay an authorized RCA service center for the
new,or at our option, refurbished replacement parts needed to
repair any defects in material or workmanship in your television. If
your television is unrepairable we will provide you with a refurbished
unit of the same or better model.
Coverage - LED LCD Panel
For a period of 12 months from date of purchase of your RCA
product, we will pay an authorized RCA service center for the
- Incapacidad para recibir la senal debido a los problemas
que no son causadas por el producto.
- Danos en el producto debido a las imagenes de grabadas
en la pantalla.
- Productos comprados o prestar servicios fuera del pais
de compra original.
Ej: Comprado en Estados Unidos no puede prestar
servicios en Mexico/Comprado en Mexico no puede
prestar servicios en Estados Unidos.
- Productos modificados o incorporados a otros productos.
- Danos debidos a fenomenos de la naturaleza, incluyendo
pero no limitado a, danos por rayos o inundaciones.
- Las llamadas de servicio que no impliquen cualquier
defecto en materiales o mano de obra.
Uso Comercial Exclusion
Esta garantia limitada solo se aplica a los productos utilizados
para uso personal o, y no cubre todos los productos utilizados con
fines institucionales, comerciales o de alquiler.
ESTA GARANTIA LIMITADA ES EL UNICO Y EXCLUSIVO
DE GARANTIA APLICABLE A ESTE PRODUCTO. EN
CORP EE.UU., Inc., el fabricante de este producto, rechaza
cualquier otra garantia, expresada o implicada (INCLUYENDO
TODAS LAS GARANTIAS IMPLICITAS DE COMERCIAL
IZACION O IDONEIDAD PARA UN PROPOSITO
PARTICULAR). NO informacion verbal o escrita por parte
CORP DE EE.UU., Inc., sus agentes, contratistas
independientes, representantes de ventas, empleados,
comerciantes minoristas, mayoristas o cualquier otro tercero
DEBERAN crear una garantia ni aumentar. Ampliar o
modificar el alcance de esta garantia limitada.
Esta GARANTIA LIMITADA DEL UNICO Y EXCLUSIVO REMEDIO
PARA EL CONSUMIDOR DE REPARACION O REEMPLAZO
DEL PRODUCTO. EN CORP EE.UU., Inc. no sera
responsable por danos especiales, incidentales o
consecuentes resultantes DEL USO DEL PRODUCTO O
DERIVADOS DE UNA VIOLACION garantia expresa o
implicita de este producto.
ESTA GARANTIA LIMITADA Y RESPONSABILIDADES contenida en el
se rige por las Leyes del Estado de Indiana. SALVOPROHIBIDO POR
LA LEY APLICABLE, CUALQUIER GARANTIA IMPLICITA DE
COMERCIALIZACION O IDONEIDAD PARA UN PROPOSITO
PARTICULAR ESTARA LIMITADA A LIMITADA periodo de garantia (S)
mencionado anteriormente. Esta garantia le otorga derechos legales
especificos y USTED TAMBIEN PUEDE TENER OTROS DERECHOS,
QUE PUEDEN VARIAR DE ESTADO.
RCA es una marca registrada de SAS bajo licencia de
ON Corporation
ON Corp US, Inc.
10920 Via Frontera, Ste 540
San Diego, CA 92127, U.S.A.
2014 ON Corporation
RCA is a trademark of RCA Trademark Management
SAS used under license to ON Corporation.
RCA es una marcade RCA Trademark Management
SAS usada bajo licencia de ON Corporation.
How do I tell an analog channel from a digital channel?
Press the OK button to display the Channel Bar. when OSD
(on-screen display)is not used, Look at the top right corner of the
screen. An “A” is displayed for an analog channel. A “D” is displayed
for a digital channel.
Note: Since the analog TV in America has been cut off, we reserve
analog TV function only for some unexpected use.
Why are there bars on my screen, and can I get rid of them?
Most digital video is sent in a 16/9 format which fills your screen, but
is sometimes sent in 4/3 which does not fill your screen. It depends
on how the station or device connected to your TV is formatting the
video. If there are bars on the screen, Check Screen size in the picture
mode to try a different format that may eliminate the bars. Some bars
can't be removed because of the way the format is sent by the
broadcaster. The format changes as you choose screen size type in the
picture mode and the format type is displayed at the bottom of the screen.
For more information on screen size, go to page 9.
Why does channel search find a lot of channels,
but when I try to tune to them, there’s nothing there?
Some channels don’t carry programming, such as video On Demand.
When channels are unavailable, your TV screen is blank or appears like
snow. You probably want to remove these channels from your channel
list. Remove these in the Channel List Menu. Go to page 8 for more
information.
Why does it take a long time when I search the channels
at first time?
If you have both analog and digital channels, the TV is looking for all
available channels in the channel list. If you do have digital channels, the
TV is also searching for scrambled channels, non-scrambled channels,
and each sub-channel of that digital channel.
Identifying Problems
If there are any problems when using the product, please consult the
list below. If the list does not solve the problem, call our Customer
Service Center immediately.
TV Problems
The TV can’t be turned on.
Make sure the AC cord is plugged in.
- Check the wall outlet, make sure the AC output works normally
and stably.
- The side panel may be locked (disabled). Use the remote control
to turn on the TV.
- Select the Keypad Lock function in the PARENTAL control Menu
and press OK to uncheck the locking status.
There is no picture or sound but the TV is on and there is a “No
Signal” sign on screen.
- Are you trying to use an input source with no device connected
to it? For using other video/audio device, make sure the external
device works normally first, then press INPUT and choose the right
input source.
- The Signal Type option may be set incorrectly. Go to page 8 for
detailed instructions.
- The channel may be blank. Try to search the channel again or
change another channel.
The sound is fine, but the picture is poor.
- If you can only get black and white pictures from external device
that you've connected to your TV, maybe it is due to the video
The Remote control doesn’t work.
- There may be an AC power failure or the pow er cord
unplugged in.
- Something might be blocking between the remote control and the
remote sensor on the front panel of the TV. Make sure there is a clear path.
- The remote may not be aimed directly at the TV.
- The batteries in the remote may be weak, dead, or installed
incorrectly. Put new batteries in the remote.
You are experiencing problems with V-Chip/Parental Controls.
- If the rating limits don’t work, you must lock the settings. Go to the
Main Menu (press MENU on your remote), select PARENTAL control to
check the settings.
What else can I do?
If you’ve been through the Troubleshooting section and nothing has
fixed your problem, try rebooting your TV.
Note that after a reboot, you may need to run your TV through the
setup process again. To reboot, unplug the power cord from the wall
outlet or power strip.
Keep your TV unplugged for about 5 minutes. Then plug in the TV and
turn it on. See if the problem is fixed.
If the problem remains, then please visit the Customer Support Menu at
www.rca.com or updated FAQs or contact RCA Customer Support at
the support number provided in your Warranty card.
Note
A. The wall mount is not contained in the accessories sold with television.
We only provide the installing specifications but not the wall mount itself.
If you need the mount, please consult with the local dealer for a VESA
wall mount.
B. We strongly suggest to set the wall mount with equipments of
specification we ordered. If not, inappropriate installing may cause
damage to device or people.
C. We suggest that you keep your TV at least 2.36 inches(60mm) from the
wall to prevent cable interference.
Warnings
1. Do not set up the wall mount by yourself. Please contact
qualified professionals for installation.
2. The TV should not be mounted on walls or surfaces which have
an angle more than 10 degrees with vertical direction. Otherwise
the TV set may fall.
3. The walls for mounting must have enough strength to hold the
whole weight of TV set. For example, concrete wall and brickwork
cables is not connected well, or they are connected wrongly.
Check the connection stability first, then check the correctness.
For AV input, the yellow video cable connects to the yellow Video
In jack on the side of your TV.
For Component input, the three Y, Pb, Pr video cables (red, blue,
and green) should be connect to the corresponding input jacks
on the side of your TV.
- Check the antenna connections. Make sure all of the cables are
firmly connected to the TV jack on side of your TV.
- Try adjusting the color features to improve.
There is no sound, but the picture is fine.
- The sound might be muted. Try pressing the MUTE button to
restore sound.
- For using AV or Component, remember to connect the device’s left
and right audio output correctly. The left channel cable is white and the
right channel cable is red. Please match the cables and jacks according
to their colors.
- The sound settings may not be set correctly. Go to page 9 for
more information.
- If your audio source has only one jack or is a (mono) audio source,
make sure you have plugged the connection into the Audio In L jack
(white) on the TV.
The buttons on the side panel don’t work.
- The side panel may be locked (disabled). Use the remote control to
turn on the TV.
- Select the Keypad Lock function in the PARENTAL control Menu and
press OK to uncheck the locking status.
- Unplug the TV from the AC power for 10 minutes and then plug it back.
Turn the TV on and try again.
The TV turns off unexpectedly.
- The electronic protection circuit may have been activated because of
a power surge. Wait 30 seconds and then turn the TV on again.
If this happens frequently, the voltage in your house may be abnormal.
If the other electronic equipment in your home can’t work normally,
consult a qualified service personnel.
Can’t select a certain channel.
- The channel may be blocked or not approved in the PARENTAL
control Menu.
- The channel may be skipped in channel list in CHANNEL Menu.
Check the blocking and skipping status of channel.
The stereo sound performance is bad.
- It may be a weak station. Use the AUDIO Menu and set Analog Sound as
Mono.
A black box appears on the screen.
- Closed captioning might be on. Check Closed Caption in the SETUP
menu. Go to page 10 for more instructions.
Problems with the HDMI Connection.
- Make sure the HDMI device (DVD, video gamer, etc.) is turned on and the
cables are firmly connected.
If problems still occur, turn off your device and reconnect it. Reset the
power by unplugging the power cord and plugging it again.
- If a “No Signal” message appears on screen , the HDMI device
isn’t responding. Contact the manufacturer of the HDMI device for
further assistance.
- If you have black bars on each side of your picture (which
means the TV can not display a full-screen image), the device you
connected might have a switch or a menu option allowing you to
change the picture quality output that will fix this. Choose either
720p or 1080i.
are eligible. Do not place the mount on soft walls such as earth
walls and plasterboard.
4. If spare parts of different specifications (such as screws) are
used during mounting, consult with qualified professionals to
make sure these parts are safe and effective.
5. Before attaching the base to wall, ensure the holes for anchors
are in keeping with the installing rules. Otherwise there may exist
some potential problems.
6. Do not place any heating source under your television. Or else,
it can cause fire.
7. Do not place the TV near anything dripping. Transducers and
high voltage wires should be kept far away from the apparatus
too. Or else, it may cause creepage, electric shock or bad
resonance.
8. Do not place TV in a location where collision or vibration is
liable to happen.
9. In order to avoid unexpected falling of the TV set, do not put
any strong force on TV or wall mount after installing.
10. Be sure to unplug the TV before installing. Keep anything hard
or sharp away from the screen panel to prevent the scuffing.
11. After installing, if there is any need to move the cabinet, please
contact the qualified professionals.
With USB Media Play, you can enjoy music and photo files stored
in a USB storage device on your RCA TV.
Connecting a USB storage device
- Connect a USB storage device to the USB port in the back of the TV.
- Press “INPUT” and select “USB”.
- “USB Media Play” menu will appear.
Playing back Photo files
- Press arrow ( ) to select “Photo” and press “OK”.
- The file or folder list will show up. Press arrow( ) to select a file
or folder. Press “OK” , and you will be given several options to view
photo files.
- You can directly open and playback the file. View thumbnails for
photo preview, or play slideshow.
Playing back Music files
- Press arrow ( ) to select “Music” and press “OK”.
- The file or folder list will show up. Press arrow( ) to select a file
or folder. Press “OK” to playback the music file you selected.
Playing back Movie files
- Press arrow ( ) to select “MOVIE” and press “OK”.
- The file or folder list will show up. Press arrow( ) to select a file
or folder. Press “OK” to playback the movie file you selected.
Playing back Text files
Similar to the photo menu. You can use TEXT menu to access and
display text on your RCA TV.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS
AND YOU ALSO MAY HAVE OTHER RIGHTS THAT VARY
FROM STATE TO STATE.
RCA is a trademark of RCA Trademark Management
SAS and used under license by ON Corporation
Cobertura-Trabajo
Durante un periodo de 12 meses desde la fecha de compra de su
producto RCA, pagaremos a un centro autorizado de servicio de RCA
el cargo de mano de obra para reparar cualquier defecto en materiales
o mano de obra en el televisor.
Si su t elevisor es irrepara ble que le proporcionara una un idad
reacondicionada del mismo modelo o superior.
Cobertura / Recambios
Durante un periodo de 12 meses desde la fecha de compra de su
producto RCA, pagaremos a un centro autorizado de servicio de RCA
para un reemplazar ya sea con partes nuevas o reacondicionadas, o a
nuestra opcion, para reparar cualquier defecto del material o mano de
obra en el televisor.
Si su televisor es irreparable que le proporcionara una unidad
reacondicionada del mismo modelo o superior.
Panel de Cobertura-LED LCD
Durante un periodo de 12 meses desde la fecha de compra de su
producto RCA, pagaremos un centro autorizado de servicio de RCA
para un reemplazar la pantalla LED LCD, ya sea con pantalla nueva o
reacondicionada, o a nuestra opcion, para reparar cualquier defecto del
material o mano de obra en la pantalla de su televisor. Si su televisor
es irreparable que le proporcionara una unidad reacondicionada del
mismo modelo o superior.-
Como Obtener Servicio
Para asistencia en Estados Unidos (E.U.A) si compro un aparato RCA
en E.U.A. favor dellamar al: 1-888-977-6722
o visite: www.rca.com
El representante de Servicio revisara sus opciones para el servicio.
Para su comodidad le ofrecemos tres formas de obtener servicio de
garantia.
Usted puede enviar su producto a la direccion proporcionada por
el representante de servicio, usted puede llevar su producto a un
centro de servicio autorizado, o puede solicitar en el servicio a
domicilio (administrador determinara si el producto se encuentre en
funcionamiento en casa o debe ser llevado de vuelta a servicio local
tecnico para su reparacion).
El representante del Servicio le proporcionara las instrucciones para el
servicio preferido.
Se requiere del comprobante de compra original.
Solo se les dara servicio a Domicilio a Televisores de 37 " pulgadas de
tamano y mas grandes.
Elementos no cubiertos por la garantia limitada Su
garantia limitada no cubre los siguientes temas:
- Un-instalacion, montaje y ajuste de controles del cliente
e instrucciones de funcionamiento.
- Las pilas y los fusibles de repuesto al cliente.
- Danos por uso indebido, abuso, negligencia o descuido
incluyendo pero no limitado a, los danos derivados
de la exposicion a la humedad, la humedad o la sal.
new, or at our option, refurbished LED LCD panel needed to repair
any defects in material or workmanship in your television. If your
television is unrepairable we will provide you with a refurbished unit
of the same or better model.
How to Obtain Service
For assistance (U.S.A) - if you purchased RCA product in
U.S.A, please call 1-888-977-6722.
Or visit www.rca.com
The service representative will review your options for service.
As a convenience we offer three ways to obtain warranty service.
You may mail your product to the address provided by the service
representative, you may take your product to an authorized service
center, or you may request in home service (servicer will determine if
product is serviceable in home or must be taken back to local service
center for repair). Service representative will supply instructions for
preferred service. At the time of service proof of purchase such as
original receipt, will be required. Only 37” LCD size and above are
applicable for in-home-service.
Items Not Covered By Limited Warranty
Your limited warranty does not cover the following items:
-Un-installation, installation and adjustment of customer controls and
operating instruction.
-Batteries and customer replacement fuses
-Damage due to misuse, abuse, negligence or neglect including but, not
limited to, damage resulting from exposure to moisture, humidity or salt.
-Inability to receive a signal due to problems not caused by the product.
-Damage to the product due to images burnt into the screen.
-Product purchased or ser viced outside of C ountry of Original
Purchase.
-i.e. Purchased USA can not be serviced in Mexico/Purchased in
Mexico can not be serviced in USA.
-Product modified or incorporated into other products.
-Damage due to acts of nature, including but not limited to,lightning
damage or flooding.
-Ser vice cal ls which do not involve any defect in m aterials or
workmanship.
Commercial Use Excluded
This li mited warranty only applies to products used for personal use
and does not cover any product used for institutional, commercial or
rental purposes.
THIS LIMITED WARRANTY IS THE SOLE AND EXCLUSIVE
WARRANTY APPLICABLE TO THIS PRODUCT. ON CORP US, INC.,
THE MANUFACTURER OF THIS PRODUCT, DISCLAIMS ALL
OTHER WARRANTIES, EXPRESSED OR IMPLIED (INCLUDING ALL
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE). NO VERBAL OR WRITTEN INFORMATION
GIVEN BY ON CORP US, INC., ITS AGENTS, INDEPENDENT
CONTRACTORS, SALES REPRESENTATIVES, EMPLOYEES, RETAIL
DEALERS, WHOLE SALE DISTRIBUTORS OR ANY OTHER THIRD
PARTY SHALL CREATE A GUARANTY OR INCREASE. EXPAND OR
MODIFY THE SCOPE OF THIS LIMITED WARRANTY.
THIS LIMITED WARRANTY PROVIDES THE SOLE AND EXCLUSIVE
REMEDY FOR THE CONSUMER OF REPAIR OR REPLACEMENTOF
THE PRODUCT. ON CORP US, INC. SHALL NOT BE LIABLE FOR
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT
OF THE USE OF THEP RODUCT OR ARISING OUT OF A BREACH
EXPRESSED OR IMPLIED WARRANTY ON THIS PRODUCT.
THIS LIMITED WARRANTY AND THE DISCLAIMERS CONTAINED
HEREIN ARE GOVERNED BY THE LAWS OF THE STATE OF INDIANA.
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE IS LIMITED TO APPLICABLE LIMITED
WARRANTY PERIOD(S) SET FORTH ABOVE.
Model Unit Dimension (unit:mm) Screw
LED32B30RQ VESA 200 x 100 M6 screws, length 14mm
Humidity
RF input
Video input
Audio input
Audio output
Storage Humidity : Less than 85%RH
(No condensation)
Operation Humidity : Less than 80%RH
(No condensation)
AC 100-120V, 60Hz
Cable/Antenna × 1
AV × 1
AV × 1
HDMI × 2
1366 × 768
Component × 1
Headphone × 1, Digital Audio Out × 1
Power Supply
Connection
Interface
Resolution
With stand
Without
stand
With stand
Without
stand
480i, 480p, 720p, 1080i
29.3”W × 19.6”H × 6.9”D
29.3”W × 17.7”H × 3.2”D
14.3LBS(6.5KGS)
11.2LBS(5.1KGS)
less than 42W
Component/HDML mode
Dimensions
Weight
Power Consumption
Diagonal Display Size
Television System
Channel Coverage
Temperature
31.5 inches
American TV standard
Operating Temperature is
Storage Temperature is
ATSC/NTSC system
VHF : 2~13 UHF : 14~69
CATV : 1~135
-20℃ ~
+60℃
0℃ ~
+50
℃
-4℉ ~
+140℉
+32℉ ~ +122 ℉
Model
LED32B30RQ
1213 1314 1415
LIMITACION DE GARANTIA
USB Media Play
Troubleshooting
Wall Mounting Unit Specification
Product Speci cationfi
LIMITATION OF WARRANTY
Limited Warranty for USA
Garantia limitada para EE.UU
200 mm
100 mm
PICTURE
Picture Mode
Color Mode
Screen Size
Noise Reduction
Dynamic Contrast
Video Style Video
Move Select
OK MENU Return
Low
Low
Wide
Warm
AUDIO
Sound Mode
Audio Language
Analog Audio Output
Digital Audio Output
Surround
Audio Only Off
Move Select
OK MENU Return
Off
PCM
STEREO
English
Time Menu
The Time Menu lets you change the TV time settings. To access
the Time Menu, press MENU on the remote, and then select Time
from the Main Menu.
Lock Menu
The Lock Menu enables you to lock program with special content,
panel key board and input source. Press MENU on the remote and
choose Lock Menu from the Main Menu. Press the down button to
proceed the Lock Menu. The menu image and explanation are shown
below.
TIME
Sleep Timer
Time Zone
Auto Clock
Clock
Wake Up
OSD Display Duration 15 Sec.
Move Select
OK MENU Return
2014/1/18 12:0 PM
----/--/-- --:--
On
Eastern
Off
QUICK MENU
Picture Mode
Sound Mode
Closed Caption
Sleep Timer
Move Select
OK MENU Return
Off
CHANNEL
Auto Scan
Show / Hide
Channel List
Signal Type
DTV Signal
Move Select
OK MENU Return
Air
Good
SETUP
Menu Language
Menu Transparency
Closed Caption
All reset
Initial Setup Wizard
Move Select
OK MENU Return
Blue Background On
0%
English
SETUP
Closed Caption
Caption Display
Digital Caption Type
Digital Caption Style
Move Change Setting MENU Return
Show or hide closed caption
CC Off
LOCK
Parental Control
Move Select
OK MENU Return
----
Change Setting
OK
LOCK
V-CHIP
US V-CHIP
Canada V-CHIP
Block UnRated Show
Downloadable Rating
Clear Downloadable Data
Restrict movie and TV programs by US Ratings
Move MENU Return
Keypad Lock
Select this option to block or unblock the TV’s side panel buttons
so that they can’t be used.
Clear Channel List
This option allows you to execute Clear Channel List function.
This function will reset the whole TV system to factory default (not
only reset OSD menu).
Caption Display
Press left/right arrow to select caption display cc on or cc off.
Channel List
ARC
Adopted in TV output of digital audio, can be connected to the
device supporting ARC, transmit the TV sound to the device.
Remote
select your remote: Off, remote1 or remote2. this is for special
purpose.
Off
LOCK
Parental
Control
Change PIN
Input Block
V-CHIP
Keypad Lock
Clear Channel List
Remote
Execute
Change your 4-digit PIN
Move Change Setting
OK MENU Return
Supported Files
Supported USB storage/file system format
Photo
USB Storage USB flash drive
File System format FAT32
Music
JPG/JPEG files
WAV files
Movie MPG files
USB 2.0
PHOTO MUSIC MOVIE TEXT
Channel Bar
Press the OK button on the remote control, when OSD (on-screen
display)is not used, the channel bar will appear on the Bottom of the
screen. It displays the current channel’s information. The following list
describes the items on the channel bar.
Adjust the OSD Screen
The OSD (On Screen Display) menu enables you to approach to the
TV functions.
To use OSD menu system, press OK button on remote control, then
use left/right arrow to highlight an option from QUICK, CHANNEL,
PICTURE, AUDIO, TIME, SETUP or LOCK and press OK/down
button.
Press the up and down arrow to move to a different option within
each menu. If necessary, press OK or right arrow to display the
choices of the option you’ve highlighted. If available, use the text at
the bottom of each screen for help. To return to the previous menu,
press the MENU button.
To exit the OSD menu:
• Press the EXIT button. The menu will clear from the screen.
• Press the MENU button repeatedly until the menus disappear.
Adjusting Volume
Press the VOL+/VOL- button on the remote control to adjust the
volume. If you want to switch sound off, press MUTE. When OSD
(On Screen Display) is not used, the arrows left/right can also work
as VOL-/VOL+ buttons.
EPG (Electronic Program Guide)
Press EPG button on the remote control, the electronic program
guide will appear in the center of screen. The electronic program
guide gives the TV program playing project. You can use left/right
arrows to switch pages.
OSD Menu Operations
Jan-01 07:10 Sat
4:3/CC
480i/480i
English/Stereo
Displays current program date and time.
Di spla ys the sc reen aspect ratio.
Display the CC status (on or off).
If the channel is Dolby Digital AC-3, the
double-D symbol is displayed.
Displays the signal resolution.
Displays whether the current channel is
being broadcasted in stereo or mono. If
the current channel is digital, this space
will be SAP (Second Audio Program)
language.
ATSC-1
D14-1/A2
English
480i
Air
DTV ATV
4:3
Jan-01 07:10 Sat
D14-1 ATSC-1
Stereo
480i
Air
CC
Jan-01 07:10 Sat
A2
If the channel is analog, A is displayed. If
it’s a digital channel, D is displayed. For
example, in the pictures above, A2 is an
analog channel, and D50-1 is a digital
channel ( -1 is a sub-channel number).
Display the current TV signal type.
Note: Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
Produktspezifikationen
| Marke: | RCA |
| Kategorie: | Fernsehen |
| Modell: | LED32B30RQ |
Brauchst du Hilfe?
Wenn Sie Hilfe mit RCA LED32B30RQ benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Fernsehen RCA
24 September 2024
24 September 2024
20 September 2024
6 September 2024
24 August 2024
16 August 2024
10 August 2024
10 August 2024
6 August 2024
3 August 2024
Bedienungsanleitung Fernsehen
- Fernsehen Samsung
- Fernsehen Infiniton
- Fernsehen Clatronic
- Fernsehen Acer
- Fernsehen Sanyo
- Fernsehen BenQ
- Fernsehen Lexibook
- Fernsehen Manhattan
- Fernsehen Manta
- Fernsehen Medion
- Fernsehen Philips
- Fernsehen Sony
- Fernsehen Sweex
- Fernsehen Tevion
- Fernsehen Zalman
- Fernsehen Panasonic
- Fernsehen LG
- Fernsehen MX Onda
- Fernsehen AEG
- Fernsehen Siemens
- Fernsehen Electrolux
- Fernsehen Küppersbusch
- Fernsehen OK
- Fernsehen Vox
- Fernsehen TechniSat
- Fernsehen XD Enjoy
- Fernsehen Denver
- Fernsehen ECG
- Fernsehen Intenso
- Fernsehen MarQuant
- Fernsehen Bush
- Fernsehen Telefunken
- Fernsehen Thomson
- Fernsehen Trevi
- Fernsehen BEKO
- Fernsehen Blaupunkt
- Fernsehen Grundig
- Fernsehen Schneider
- Fernsehen Sharp
- Fernsehen Aspes
- Fernsehen Brandt
- Fernsehen Daewoo
- Fernsehen Pyle
- Fernsehen Mitsubishi
- Fernsehen Finlux
- Fernsehen Haier
- Fernsehen High One
- Fernsehen Hisense
- Fernsehen Luxor
- Fernsehen NABO
- Fernsehen Nordmende
- Fernsehen Salora
- Fernsehen SEG
- Fernsehen Smart Brand
- Fernsehen Svan
- Fernsehen Techwood
- Fernsehen Vestel
- Fernsehen Philco
- Fernsehen Schaub Lorenz
- Fernsehen Aiwa
- Fernsehen Alphatronics
- Fernsehen AudioSonic
- Fernsehen Coby
- Fernsehen Bang And Olufsen
- Fernsehen DIFRNCE
- Fernsehen Lenco
- Fernsehen Mpman
- Fernsehen ODYS
- Fernsehen Pioneer
- Fernsehen Polaroid
- Fernsehen Jay-Tech
- Fernsehen JVC
- Fernsehen Krüger And Matz
- Fernsehen Muse
- Fernsehen Nokia
- Fernsehen Optoma
- Fernsehen PEAQ
- Fernsehen Xiaomi
- Fernsehen Abus
- Fernsehen Megasat
- Fernsehen Walker
- Fernsehen Akai
- Fernsehen Arçelik
- Fernsehen Caratec
- Fernsehen Changhong
- Fernsehen Chiq
- Fernsehen Continental Edison
- Fernsehen Dual
- Fernsehen Dyon
- Fernsehen Edenwood
- Fernsehen Ferguson
- Fernsehen Funai
- Fernsehen GoGEN
- Fernsehen Hannspree
- Fernsehen Hitachi
- Fernsehen Horizon
- Fernsehen Hyundai
- Fernsehen JTC
- Fernsehen Kernau
- Fernsehen Loewe
- Fernsehen Metz
- Fernsehen MT Logic
- Fernsehen Orava
- Fernsehen Orion
- Fernsehen Reflexion
- Fernsehen Star-Light
- Fernsehen Strong
- Fernsehen TCL
- Fernsehen Tesla
- Fernsehen Toshiba
- Fernsehen Allview
- Fernsehen Casio
- Fernsehen Sencor
- Fernsehen Icy Box
- Fernsehen Element
- Fernsehen ViewSonic
- Fernsehen Dell
- Fernsehen Lenovo
- Fernsehen Cecotec
- Fernsehen Nikkei
- Fernsehen Xiron
- Fernsehen Opera
- Fernsehen Sagem
- Fernsehen Antarion
- Fernsehen Xoro
- Fernsehen Humax
- Fernsehen Logik
- Fernsehen CGV
- Fernsehen LTC
- Fernsehen Bluesky
- Fernsehen Orima
- Fernsehen Proline
- Fernsehen NEC
- Fernsehen Marantz
- Fernsehen TEAC
- Fernsehen Packard Bell
- Fernsehen Westinghouse
- Fernsehen AOC
- Fernsehen NextBase
- Fernsehen Vivax
- Fernsehen Uniden
- Fernsehen Kogan
- Fernsehen Innoliving
- Fernsehen Magnum
- Fernsehen Smart Tech
- Fernsehen JGC
- Fernsehen Soundmaster
- Fernsehen Sylvania
- Fernsehen Qilive
- Fernsehen Doffler
- Fernsehen NewStar
- Fernsehen Zenith
- Fernsehen Insignia
- Fernsehen Roadstar
- Fernsehen SereneLife
- Fernsehen Woxter
- Fernsehen Sogo
- Fernsehen Peerless-AV
- Fernsehen Oppo
- Fernsehen Vivo
- Fernsehen AYA
- Fernsehen Furrion
- Fernsehen Seiki
- Fernsehen Alba
- Fernsehen Aldi
- Fernsehen Daitsu
- Fernsehen Digihome
- Fernsehen E-motion
- Fernsehen Emerson
- Fernsehen GPX
- Fernsehen Graetz
- Fernsehen HKC
- Fernsehen Hoher
- Fernsehen ILive
- Fernsehen Naxa
- Fernsehen Online
- Fernsehen Onn
- Fernsehen Oyster
- Fernsehen Premier
- Fernsehen Reflex
- Fernsehen Rm 2000
- Fernsehen Saba
- Fernsehen Sbr
- Fernsehen Sunny
- Fernsehen Sunstech
- Fernsehen TechLine
- Fernsehen Technika
- Fernsehen Tele 2
- Fernsehen Grunkel
- Fernsehen Tve
- Fernsehen Viewpia
- Fernsehen Vision Plus
- Fernsehen Vizio
- Fernsehen Voxx
- Fernsehen Wharfedale
- Fernsehen Yasin
- Fernsehen Ziggo
- Fernsehen Videocon
- Fernsehen Bauhn
- Fernsehen Planar
- Fernsehen Monster
- Fernsehen Mitsai
- Fernsehen Proscan
- Fernsehen Kunft
- Fernsehen Nevir
- Fernsehen Seura
- Fernsehen EKO
- Fernsehen SunBriteTV
- Fernsehen Kemo
- Fernsehen V7
- Fernsehen Astar
- Fernsehen QBell Technology
- Fernsehen Visco
- Fernsehen Majestic
- Fernsehen DirecTV
- Fernsehen HCI
- Fernsehen Mach Power
- Fernsehen MBM
- Fernsehen Inno-Hit
- Fernsehen Elements
- Fernsehen Palsonic
- Fernsehen Cello
- Fernsehen Pantel
- Fernsehen FFalcon
- Fernsehen Coocaa
- Fernsehen SYLVOX
- Fernsehen ISymphony
- Fernsehen Aristona
- Fernsehen Apex
- Fernsehen Tucson
- Fernsehen Kubo
- Fernsehen Avtex
- Fernsehen NPG
- Fernsehen Telesystem
- Fernsehen ATYME
- Fernsehen Lin
- Fernsehen Tivax
- Fernsehen H&B
- Fernsehen Norcent
- Fernsehen TELE System
- Fernsehen Belson
- Fernsehen Elbe
- Fernsehen Mitzu
- Fernsehen Voxicon
- Fernsehen Aconatic
- Fernsehen Mitchell & Brown
- Fernsehen FOX Electronics
- Fernsehen Mystery
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024