Ram Audio Pi4-6K Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ram Audio Pi4-6K (2 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Pi
DSP management: RAM OCS and amplifier display:
Two general working modes: User and Advanced (manufacturer)
· User functionalities:
- Input Routing matrix Analog/Dante/AES3
- Input EQ section with 8 filters and 20 memories
- Input EQ Use section, predefined by the manufacturer
- System Preset selection predefined by the manufacturer
(Locked/Unlocked)
- Snapshot library management up to 20 pre-sets
- Master Control Groups
· Advanced functionalities (manufacturer):
- Input EQ “Use” section creation, up to 20 pre-sets
- Ways routing section (Locked/Unlocked)
- IIR EQ section: XOver, Gain, Delay, and 7 EQ filters
- FIR EQ section: linear phase XOver and EQ filters, or
custom up to 1000 taps
- RMS and Peak Dynamic control
- Snapshot library management up to 20 pre-sets (Locked/Unlocked)
- System Preset library management up to 100 pre-sets
- 5 Security levels definition to limit final user functionality
Extra-large TFT display, capacitive touch panel user inter-
face
64 bit double-precision 96kHz DSP process
High performance 96kHz/24 bits AD/DA converters
Available versions with DanteTM Networking (AES67) and
AES3 Digital inputs
Two ports Ethernet switch for daisy chain connection
USB port for firmware update and DSP control
High voltage output for high headroom performances
Similar power per channel in any impedance
Advanced power management to squeeze until the last
watt of your speakers
Exceptional power sharing in asymmetrical loads
Powerful and fast response cooling system
Series
OUTPUT POWER Pi2- 3K Pi2-5K Pi4-6K Pi4-10K
2 ohms 2x 1450 W 2x 2500 W 4x 1450 W 4x 2500 W
4 ohms 2x 1500 W 2x 2500 W 4x 1500 W 4x 2500 W
8 ohms 2x 1100 W 2x 1600 W 4x 1100 W 4x 1600 W
Hi-Z 70V 2x 1500 W 2x 2500 W 4x 1500 W 4x 2500 W
Hi-Z 100V 2x 800 W 2x 2500 W 4x 800W 4x 2500 W
©2021 by C.E. Studio-2 s.l. Pol.Ind. La Figuera - C/Rosa de Luxemburgo nº34 - 46970 Alaquas - Valencia - SPAIN
Phone:+34 96 127 30 54 - ramaudio.com - e-mail: info@ramaudio.com
RAM Audio®, PMS, SSP, ICL and QuantaPulse are registered trademarks of C.E. Studio-2 s.l.. All other names are trademarks of their respective companies.
Amplifier Specifications
DSP Specifications - RAM_OCS Control
Overall:
• High performance 96kHz/24 bits AD/DA converters
• 64 bit double-precision 96kHz DSP process
• 0.85 ms minimum process latency time
• Custom FIR process up to 1000 taps
• Dante and AES3 input versions
Input Section (x4):
• Gain, Mute and Phase inversion
• Input Delay: Up to 114 meters (333ms)
• Input EQ: 16 filters (Param., Shelving, LP, HP, BP, SB, AP)
Output Section (x4):
• Crossover Filters: FIR and IIR (up to 48dB/oct,
Butterw./LR/Bessel)
• Output Delay: 0 to 31 meters (90ms) per channel
• Output IIR EQ: 12 filters per channel (Param., Shel, LP, HP,
BP, SB, AP)
• Output FIR EQ: 20 filters per channel (Parametric,
Shelving, LP, HP, BP, SB, AP), or Custom. Up to 1000 taps
• RMS and Peak limiter per channel
Communications:
• Two ports Ethernet switch for daisy chain connection
• USB 2.0 Type B port
Miscellaneous:
• 100 Manufacturer system preset memories library
• 20 User preset memories library
• 20 User snapshot memories library
• Manufacturer/User passwords
• User control groups for virtual Equalization, Gain and
Delay
• Zones definition for library management and alerts infor-
mation
• Smaart® analysis software integration
Pi2-3K Pi2-5K Pi4-6K Pi4-10K
Number of channels 2 2 4 4
Total output power 3000 W 5000 W 6000 W 10000 W
Output Power* (All ch.’s driven/single channel)
2 ohms 2x 1450 W 22x 2500 W 24x 1450 W 24x 2500 W 2
1x 1450 W 21x 2500 W 21x 1450 W 21x 2500 W 2
4 ohms 2x 1500 W 2x 2500 W 4x 1500 W 4x 2500 W 1
1x 1750 W 1x 2800 W 1x 1900 W 1x 3000 W
8 ohms 2x 1100 W 2x 1600 W 4x 1100 W 4x 1600 W
1x 1150 W 1x 1700 W 1x 1200 W 1x 1800 W
4 ohms Bridged 2900 W 25000 W 22x 2900 W 22x 5000 W 2
8 ohms Bridged 3000 W 5000 W 2x 3000 W 2x 5000 W 1
Hi-Z 70V 2x 1500 W 2x 2500 W 2 4x 1500 W 4x 2500 W 2
Hi-Z 100V 2x 800 W 2x 2500 W 4x 800 W 4x 2500 W 1
Max output voltage 144 V 176 V 144 V 176 Vpeak peak peak peak
Max output current 38 A 50 A 38 A 50 Apeak peak peak peak
Total Harmonic Distortion <0.05%
Voltage Gain 26dB to 44dB (1dB step)
SNR 106 dBA 107.5 dBA 106 dBA 107.5 dBA
Required AC Mains
Operating Voltage (50Hz-60Hz) 170V-265V AC / 90V-140V AC
1/8 Rated Power (@230V, 4 ohms) 7 A 8 A 15 A 16 A
Dimensions W x H x D (mm) 483x89x320
Weight Net (kg-Lbs) 6-13.2 8.5-18.7 8.5-18.7 8.5-18.7
Protections: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads,
Overloaded power supply, ICL™, PMS™, and SSP™
* IEC filtered pink noise signal (40Hz-5kHz, 12dB crest factor). 230V AC mains.
1 PMS can limit output to prevent excessive current draw tripping the mains breaker.
2 SSP can limit output to prevent excessive heating.


Produktspezifikationen

Marke: Ram Audio
Kategorie: Empfänger
Modell: Pi4-6K

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ram Audio Pi4-6K benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Empfänger Ram Audio

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-