Qtx GoboPar35 Bedienungsanleitung

Qtx Beleuchtung GoboPar35

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Qtx GoboPar35 (4 Seiten) in der Kategorie Beleuchtung. Dieser Bedienungsanleitung war fĂĽr 26 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
www.avsl.com 151.741UK User Manual
GoboP ar35
2in1 Light Effect
Item ref: 1.15 741UK
User Manual
Thank you for choosing the GoboP A versatile 2- -1 light effect, combining 4 moving colour gobos ar35, in
and 15 RGB colour-wash LEDs in a compact and convenient package. Power up the unit and simply
control it with the included IR remote control. With a press of a button you can set it to Auto-Run, Sound-
Activation and many other built-in sequences. For more advanced users, it can be connected to a DMX
controller for more sophisticated control. A colourful and flexible stage lighting solution, ideal for mobile
setups as well as permanent installa tions
In the box:
Your GoboPar should arrive with you in a single carton in good cond T carton should contain 35 ition. he
1 x main unit with bracke 1x remote control, 1 x UK IEC mains lead and 1 x manual. t,
Warning:
To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event
of a spillage, disconnect the mains and allow the unit to dry out naturally. Qualified personnel should then
check the unit before continuing use.
Please read through this manual thoroughly before use, any damage
Cause by misuse of product will be covered by warrantd not y.
Please do not open cover, contains high voltage. This
product is not serviceable or repairable by the end user.
Please refer to qualified personnel for service and repair.
www.avsl.com 1.741UK User Manual 15
Placement:
• Use the included mounting bracket to fix to a stand or lighting truss
• Use secondary safety fixings if mounting overhead
• Keep away from damp or dusty environments
• Ensure adequate air-flow around the fixture housings
• Ensure adequate access to controls and connections
Cleaning:
• Use a soft cloth with a neutral detergent to clean the casing as required
• Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups
• Do not use strong solvents for cleaning the unit
Rear panel controls:
1. DMX Signal in
2. DMX Signal out
3. IEC Mains in
4. LCD display
5. Microphone
6. Manual control buttons
Manual control menu:
Press the “MENU” button to enter the settings menu.
Press “ ” and “ ”UP DOWN buttons navigate through various setting functio to ns.
P button save the desired setting. ress “ ”ENTER to
Menu
Number range
Function and description
A001
001-512
DMX address settings 12 channel mode
AU 01
AU01
Gobos and colour wash fast program
AU02
Gobos and colour wash smooth program
AU03
Gobos and colour wash fast and smooth autorun
Sud1
Sud1
Sound active gobos and colour wash
Sud2
Sound active colour wash strobe effect
Sud3
Sound ac ve c our wash and strobe effect ti ol
Sud4
Sound active gobos and strobe effect
or
o 0 - or16 r0
Colour wash scroll slow to fast
1.
2.
5.
6.
www.avsl.com 1.741UK User Manual 15
oJ
oJ00 - oJ16
Colour wash jump slow to fast
CC
CC01 - CC16
Colour combination gobos and colour washes 1- 16
uJ
uJ00 - u 6 J1
Gobo colour jump slow to fast
ur
u 0 - ur16 r0
Gobo colour scroll slow to fast
uP
uP00 - 08 uP
Gobo kaleidoscope forward and reverse
St
St00 - 6 St1
Strobe effect slow to fast
r
r000 - r2 55
Red brightness setting low to high ,
G
G000 - G255
Green brightness set low to high ting,
b
b000 - b255
Blue brightness setting low to high,
Remote control:
GoboPar35 is supplied with an I.R. remote control for quick access to most of the basic functions of the
unit. This must be aimed at the front of the unit where there is a remote receiver and has a maximum
range of approximately 4m. Controls are listed on the layout drawing below.
DMX mode:
The GoboPar can be controll by DMX signal, simply connect the DMX sig l source to the DMX input 35 ed na
on the unit via balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by looping a
through the DMX out on the To enter DMX mode, select A001 from the menu and co m the correct unit. nfir
start address using the and buttons and to confirm by “ ”UP “ ”DOWN “ ”ENTER .
This unit has DMX channels as indicated in the table below: 12
Channel
Function
Description
CH1
Master dimmer
RGBW from low to high
CH2
Red dimming
low to high
CH3
Green dimming
low to high
CH4
Blue dimming
low to high
CH5
Pattern 1 dimming
low to high
CH6
Pattern 2 dimming
low to high
CH7
Pattern 3 dimming
low to high
CH8
Pattern 4 dimming
low to high
CH9
Whole light strobe
Slow to fast
CH10
Colour wash select ion
0- : CH1 to CH9 control 50
1. LED Display on/off
2. Sound active/Strobe effect
3. Colour brightness adjust
4. Save current setting
5. Colour wash scroll/Gobo colour
scroll
6. Number keypad
7. Up select
8. Gobo & colour wash/Colour
combination
9. Down select
10. Colour wash jump/Gobo colour
jump
11. Gobo kaleidoscope
12. Quick DMX
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.


Produktspezifikationen

Marke: Qtx
Kategorie: Beleuchtung
Modell: GoboPar35

Brauchst du Hilfe?

Wenn Sie Hilfe mit Qtx GoboPar35 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Beleuchtung Qtx

Bedienungsanleitung Beleuchtung

Neueste Bedienungsanleitung fĂĽr -Kategorien-