Pyramid PSV150 Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pyramid PSV150 (8 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 22 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
AC-to-DC Power Converter with USB Charger
and Vehicle Cigarette Lighter Socket
Desktop Bench Power Supply
1
FEATURES
Your PYRAMID Heavy-Duty 9-Amp (PSV90) & 12-Amp (PSV150) Switching DC
Power Supply is designed to use AC power-to-power equipment that requires 12V
DC automotive power. The power supply converts standar 120V AC household
power to 13.8V DC power and can supply up to 9-Amp (PSV90) & 12-Amp (PSV150)
of continuous power.
Note: Your vehicle's electrical system provides 13.8 Volts when the engine is
running.
If you are electronic hobbyist or technician, you will appreciate the many uses for
the power supply at your workbench or in your house.
For example, use your CB mobile transceiver as a bass station, check the operation
of auto sound system before you install them in your vehicle, or even power marine
equipment such as pumps.
POWER SUPPLY FEATURES
Regulated Output Voltage-Makes it safe to use with mobile CBs, Ham radios, CD
players, tape players or anything you would power with a vehicle's DC electrical
system. Cooling and Fan Control a temperature controlled fan has been provided
to improve cooling at high loads. It will come on only when the temperature of the
power transformer is above 50°C or 122°F due to higher loads. In case the fan fails
or the air ow is blocked, a second temperature sensor mounted on the power
transformer will activate over temperature shut down at 100°C or 212°F. The output
voltage will be automatically resumed once the unit cools down. Electronic Over-
load Protection-automatically shuts o standard 120V AC input power to the power
supply when its output is overloaded. Overheat Protection Circuit automatically
shuts o if it overheats. Combo Output Connectors-act as both binding posts and
banana plug terminals.
2
IMPORTANT SAFETY INSTRUCTIONS
DANGER: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY
FOLLOW THESE INSTRUCTIONS.
WARNING: This unit should not be directly connected to a battery for charging or
for battery back-up. Battery charging and battery back-up may be undertaken only
when the battery is connected through suitable external isolating diodes and
charge limiting resistor. The isolating diodes will ensure that battery does not back
power the power supply. When a battery is deeply discharged, it will initially draw a
very large charging current and force the power supply into current limit mode for
prolonged periods. This is harmful for the power supply. The charge limiting resistor
will limit the charging current to ensure the maximum charging current is well
below the current limit value of the power supply.
This manual contains important safely and operating instructions for this power
supply. Before you use the power supply, read all the instructions and cautionary
markings in this manual, power the power supply, and the product that you ON
will connect to the power supply, to reduce the risk of injury:
• Do not use the power supply near water (for example, a bathtub, washbowl,
kitchen sink, laundry tub, wet basement, or swimming pool).
• Do not place the power supply on an unstable cart, stand or table. lf the power
supply falls, it could injure a person or cause serious damage to the power supply.
• Do not overload power outlets or extension cords. An overload can result in re or
electric shock.
• Do not use an extension cord unless absolutely necessary. Using an improper
extension cord could result in a risk ore and electric shock. If an extension cord
must be used, make sure:
a. The pins on the extension cord's plug are of the same number, size, and shape
as those of the plug on the charger.
b. The extension cord is properly wired and in good electrical condition.
c. The extension cord's wire size is at least 18 AWG.
• Do not disassemble the charger; take it to a qualied service technician when
service or repair is required. Improper reassembly may result in a risk of electric
shock or re.
• Do not use an attachment not recommended, this could result in a risk of re,
electric shock, or injury to persons.
• Never push any object into the slot in the power supply. It could touch dangerous
voltage points or short out parts resulting in a re or electrical shock.

Produktspezifikationen

Marke: Pyramid
Kategorie: Nicht kategorisiert
Modell: PSV150

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pyramid PSV150 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Pyramid

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-