Pyle PWMA200 Bedienungsanleitung

Pyle Lautsprecher PWMA200

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pyle PWMA200 (4 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
Portable PA Speaker & Microphone System Kit
PWMA100 - AZPWMA100 - PWMA200
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
CAUTION
1. Keep this device away from high temperature. Don't expose this device to direct
sunshine or near the hot equipment.
2. Don't place the device in the environment of humidity and dirts.
3. Place the device in a ventilated environment.
4. Don't pull the power cord while unplug the device. Please hold he plug to unplug.
5. Unplug the device from mains power supply if you will not use the device for a
long time.
6. Your operation must be subjected to the specied voltage marked on the device
and complied with this manual.
7. Don't open chassis! It is very dangerous either open the chassis or put your hand
inside the chassis. If the device is not working properly, unplug the device at once
and contact your retailer or the nearest distributor.
PARTS DESCRIPTION
1. Power switch
2. Wireless volume control
3. RF indicator
4. Power indicator
5. Wired MIC volume control
6. Wired MIC input jack
7. Recording output jack
8. Treble control
9. Bass control
10. ECHO control
11. Charge indicator
12. DC input jack
13. Retractable antenna
14. Speaker
15. AC IN jack
OPERATION
1. POWER SUPPLY
a. AC power: Please conrm your current AC power is same as the voltage marked
on the device.
b. DC power: DC power can be input from DC IN jack. If you use car battery, the
power should be 12V-15V. Please note the correct polarity.
c. Built-in rechargeable battery: you can also use built-in rechargeable battery.
2. Turn on power switch of amplier, power indicator will light.
3. Open the battery cover of the transmitter. Put a 9V battery into battery compartment
and then close the battery cover. Keep transmitter at least 1M from the receiver to
prevent feedback. Turn on transmitter, RF indicator on receiver will light.
Adjust wireless microphone volume to suitable level. The wireless system is now
ready to use.
4. Wired MIC can connect to MIC in jack and its volume can be adjusted separately.
Wire microphone and wireless microphone can be used at the same time.
5. Adjust TREBLE/BASS to suitable level. When feed-back comes from amplier,
please reduce TREBLE. If feedback still exists, reduce the volume slightly.
6. REC OUT can connect to recorder player or external amplier.
RECHARGING
1. Connect amplier to AC power, charge indicator will light. The unit starts to charge
rechargeable battery. DC power can not charge the battery.
2. During charging you can use the unit at the same time.
3. When using rechargeable battery, if the unit stops producing sound, this means
the rechargeable battery power is low. Connect AC power to charge the battery.
Charging time is about 8~10 hours.
4. Please charge this device every 2 months if you don't use the device for a long
period of time.
5. Unplug th unit from mains power supply if you are not going to use this device for
a long time or after charging.
www.PyleUSA.com2www.PyleUSA.com 3
www.PyleUSA.com4www.PyleUSA.com 5
TROUBLESHOOTING PWMA100
Portable PA Speaker & Microphone System (Includes Wireless Handheld Mic)
Features:
• Compact, Portable & Powerful
• PA Speaker Amplier Projects Your Voice
• Includes Wireless Handheld Microphone
• Used for Karaoke, Crowd Control, Presentations
• Built-in Rechargeable Battery
• System Charges via Built-in Wired Charging Cable
• Aux (3.5mm) Input Jack
• 1/4’’ Microphone Input
• Connect & Stream Audio from External Devices
• Top Panel Audio Control Center
• Convenient Carry Handle
What's in the Box:
• PA Speaker Amplier
• Wireless Handheld Microphone
• 9V Battery
Technical Specs:
• MAX Power Output: 80 Watt
• Wireless Range: 100’+ ft.
• S/N Ratio: 60dB
• Impedance: 600 Ohm
• PA Speaker Built-in Battery: 12V Lead Acid, 1200mAh
• Battery Operated Mic, Requires (1) x ‘9V’ Battery
• Power: 110V
• Dimensions (L x W x H): 7.1'' x 4.3'' x 11.8''
1. Rechargeable battery may be destroyed.
Please replace a new one. (Contact your dealer or
professionals for battery replacement)
2. Check the AC power connection.
The charge
indicator does
not light
PROBLEM SOLUTION
RF indicator does
not light
RF indicator
ashes
A howling noise
is heard from
speaker
1. Push the power switch to "ON"
2. Replace a new battery for transmitter.
3. Please check the frequency of transmitter.
Make sure transmitter frequency is same as main unit.
1. Rechargeable battery power is low. Please plug in AC
power to charge the battery.
2. Transmitter battery power is low. Please eplace new
battery.
Reduce microphone volume or move the microphone
away from the speaker. Keep microphone 1.5-3M from
receiver unit.
No sound 1. Check the transmitter power switch is "ON"
2. Check the W/M volume control or MIC volume is on.


Produktspezifikationen

Marke: Pyle
Kategorie: Lautsprecher
Modell: PWMA200

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pyle PWMA200 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher Pyle

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-