Pyle PUSBMIC50 Bedienungsanleitung

Pyle Mikrofon PUSBMIC50

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pyle PUSBMIC50 (1 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/1

PUSBMIC50

UHF WIRELESS USB MICROPHONE

USER’S MANUAL

PLEASE READ CAREFULLY BEFORE OPERATION

Computer

Plug USB connector of wireless USB

receiver into USB port on a computer. Turn

on handheld microphone and use audio

software in your computer to record.

USB

INTRODUCTION

With a wireless receiver built into a USB

stick and a high-quality handheld dynamic

microphone transmitter, this UHF wireless

USB microphone brings the convenience of

wireless to your karaoke and recordings. It's

the ideal wireless system for karaoke,

podcasting, YouTube performances, voice

over projects and much more.

The handheld microphone transmitter

features a high-quality dynamic mic capsule

designed to provide exceptional sound

reproduction for spoken word

presentations, as well as singing

applications and more. It offers over 60' of

wireless range (environment dependent),

operating in UHF 600~960 high frequency

band. The wireless receiver is USB powered

and features plug-and-play operation with

no driver installation required. Simply

connect the receiver directly to your

computer via USB and start singing and

recording.

FEATURES

•

system

• Wireless receiver built into a USB stick

• Handheld dynamic microphone

transmitter

• Transmitter operates on two AA batteries

(included)

• 60' operating range (environment

dependent)

• Plug-and-play operation with no driver

installation required

• Ideal for computer karaoke, podcasting,

voice over projects and much more.

• Record wirelessly to your favorite DAW or

voice recognition software on your

Mac/PC

UHF 600~960MHz high band wireless

USING HANDHELD MICROPHONE

1 2

1. USB connector: Plug into a computer or

Mp3 player USB port or 5V power adapter

to get power.

2. Line out: to connect to external speaker.

3. RF indicator: When handheld microphone

is powered on this LED will light red

displaying normal reception.

Parts Description

21 3 4

1. Grille(Capsule inside)

2. Power/low battery Indicator

3. Power ON/OFF/MUTE Switch

4. Battery Compartment/Cover

1. Open battery cover. Install the provided

2pcs 1.5V AA batteries and then close the

cover. Pay attention to the correct

polarity.

2. Push power switch to ON position, power

indicator should flash once briefly

indicating that the transmitter has

sufficient power. If the power LED

indicator stays on, it indicates that the

battery has insufficient power and should

be changed. If the power LED indicator

does not light at all and the transmitter

does not work, it indicates the battery is

dead and you should change the battery.

3. Now receiver RF indicator should

light(Please confirm frequency of

microphone same as that of receiver

before operation).

4. Push power switch to MUTE position to

mute the sound.

5. If the microphone is not going to be used

for any length of time, push power switch

to OFF position and remove the battery.

CONNECTION 1(Computer Karaoke)

Computer

Speaker

Plug USB connector of wireless USB

receiver into USB port on a computer.

Connect external speaker to phone out of

USB receiver. Play music from computer and

turn on handheld microphone to start sing a

karaoke song!

1. With this connection please set playing

device(audio output device) of your

computer to “USB Audio Device”.

2. receiver will receive

vocal signal from handheld MIC and pass

vocal signal directly to LINE OUT to be

mixed with music signal from computer

via USB connector. Recording is not

allowed in this mode.

With this connection

Note:

1. In Recording Mode please

device(audio input device) of your computer

to “USB Audio Device”.

2.In Recording Mode please do not connect

headphone or external speaker to phone

out of USB receiver. If you want to play

recorded file connect headphone or

external speaker to your computer phone

out.

set recording

Note:

SPECIFICATIONS

Frequency Range: 600~960MHz

Frequency Response: 100Hz~12KHz

Dynamic Range: >80dB

Operating Range: 60'(

)

Receiver Power Supply: 5V;

Transmitter Power Supply: 3V(2x1.5V AA

batteries)

Transmitting Power: <10mW

Receiver Output: >300mV

Output Impeadance: 1KΩ

environment

dependent

Operation

Speaker or Headphone

PHONE

MIC IN/LINE IN

CONNECTION 2(Computer Recording)

ACTIVE SPEAKER

USB PORT OF MP3 PLAYER

CONNECTION 3(Working as a Wireless

Microphone system)

Plug USB connector of wireless USB

receiver into USB port of Mp3 player in your

active speaker system. Using supplied

3.5/3.5 audio cable connect line out of

wireless USB receiver to MIC IN or LINE IN

of your active speaker.

This wireless USB receiver can also be

supplied) to be used as a wireless

microphone system.

USING WIRELESS RECEIVER

Produktspezifikationen

Marke:	Pyle
Kategorie:	Mikrofon
Modell:	PUSBMIC50
Breite:	53 mm
Tiefe:	238.7 mm
Mitgelieferte Kabel:	Audio (3,5 mm)
Produktfarbe:	Schwarz
Übertragungstechnik:	Kabellos
Impedanz:	1000 Ohm
Akku-/Batterietyp:	AA
Energiequelle:	Akku
Mikrofon-Frequenz:	40 - 15 Hz
Mikrofon-Empfindlichkeit:	95 dB
Anzahl unterstützter Akkus/Batterien:	2
Anzahl enthaltener Produkte:	1 Stück(e)
Receiver enthalten:	Ja
Maximaler Arbeitsabstand:	18 m
Tiefe (imperial):	9.4 "
Breite (imperial):	2.1 "