Pyle PTA1000BT Bedienungsanleitung

Pyle Empfänger PTA1000BT

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pyle PTA1000BT (5 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/5
PTA1000BT
Wireless BT Pro Audio Power Amplifier
2 Channel Professional Rack Mount
Bridgeable Sound Amplifier (2000 Watt)
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
www.PyleUSA.com
2 3
www.PyleUSA.com
SAFETY INSTRUCTIONS
CAUTION: To reduce the risk of electric shock, DO NOT ATTEMPT TO OPEN
THE AMPLIFIER OR REMOVE THE COVER. There are no user serviceable parts
inside. Please use a qualied technician for all servicing.
WARNING: To prevent electricalshock or re hazard, this amplier should not
be exposed to rain or moisture. Do not place objects lled with liquid, such as
vases,on the amplier.
When using electrical products, caution should always be used.
Please read and keep these safety instructions.
1. Do not use this apparatus near water.
2. Clean only with a dry cloth.
3. Do not block any of the ventilation openings. Install the amplier in
accordance with all manufacture's instructions.
4. Do not install near any heat source, such as a radiator, heat register, stove or
other apparatus (including ampliers).
5. Do not alter a polarized plug (two blades with one wider than the other) or
grounding-type plug (two blades with a third prong), as they provide
protection. If the provided plug does not t into your outlet consult an
electrician for replacement of the obsolete outlet.
6. Protect the power cord from being damaged, particularly near the plugs,
convenience receptacles and the point where they connect to the amplier.
7. Only use attachments/accessories provided by the manufacture.
8. Use only with a cart, stand tripod, bracket, or table specied by the
manufacturer, or sold with the amplier. When a cart is used, use caution
when moving to avoid injury from tipping over.
9. Unplug the amplier during lightning storms or when unused for long
periods of time.
10. Refer all servicing to qualied service personnel. Servicing is required when
the amplier has been damaged in any way. Some examples when the
power cord or plug is damaged, liquid has been spilled, objects have fallen
into the amplier, the amplier has been exposed to rain or moisture, it
does not operate normally, or has been dropped.
11. Never break o the ground pin and connect only to a proper power supply
type, indicated on the unit. For more information, write for our free booklet
" .Shock Hazard and grounding
12. If this product is to be mounted on an equipment rack, rear support should
be provided.
13. Exposure to extreme high noise levels may cause permanent hearing loss.
Individuals vary considerably in regards to noise-induced hearing loss, but
nearly everyone will experience some damage if exposed to intense noise
for an extended period of time.
The US Government's Occupationaland Health Administration (OSHA) has
specied the following permissible noise level exposures:
According to OSHA, any exposure in excess of the above permissible limits
could result in some hearing loss. Ear plugs or protectors to the ear canals must
be worn when operating this amplication system, in order to prevent
permanent hearing loss, if exposure is in excess of the limits as set forth above.
To ensure against potentially dangerous exposure to high sound pressure
levels, it is recommended that all persons exposed to equipment capable of
producing high sound pressure levels such as this amplication system be
protected by hearing protectors while this unit is in operation.
Intended to alert the user to the presence of uninsulated
"Dangerous Voltage" within the product's enclosure that may
be strong enough to create a risk electric shock to a person.
Intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.
SOUND LEVEL dBA, SLOW RESPONSE DURATION PER DAY IN HOURS
8
6
4
3
2
1 1/2
1
1/2
1/4 or less
90
92
95
97
100
102
105
110
115
www.PyleUSA.com
4 5
www.PyleUSA.com
OPERATION
Front Panel
1. INPUT GAIN (dB)
These controls are used to adjust the input gain of each channel.
They determine how loud each channel of the power amplier will sound for
a given input signal level. The maximum input gain is achieved by turning the
control completely clockwise - this setting yields the maximum mixer/system
headroom. Turning the controlback counter-clockwise will yield lower system
noise at the expense of mixer/system headroom. Turning the control fully
counter clockwise turns this setting . It is always a good idea to power upOFF
any new installing at this setting to protect the system loud speakers.
2. POWER LED (POWER)
These indicators illuminate when the AC main power is being supplied to the
amp and both channels are operational. If either channel experiences faulty
conditions, exceeds safe operating temperature limits, or if the main circuit
breaker trips, then both channel power LED will be dark, indicating shutdown.
If the mode is selected, the indicator on channel B will remain BRIDGE PWR
dark as a positive indication of this mode selection.
3. SIGNAL ACTIVITY LEDS (SIGNAL)
These indicators illuminate when the associated channel output signal level
exceeds 1 Volt RMS.
4. OVERLOAD LEDS (CLIP)
These indicators illuminate when the associated channel has been over
loaded.
5. FAULT LEDS (FAULT)
These indicators illuminate when the amplier has just been turned or if ON
the amplier has detected a problem, such as overheating or circuit problems.
6. POWER SWITCH
This heavy-duty, rocker-type switch turns on the power to the amplier.
When the unit is turned on, there is a three-second delay, which reduces
/eliminates the turn-on transients assodated with the system equipment
connected to the amplier and protects loudspeakers.
7. LEVEL INDICATOR
Channel A and Channel B level LED indicator.
8. BT/AUX IN BUTTON SWITCH
Press to switch Wireless BT mode. Unpress for AUX mode.
9. Wireless BT ANTENNA: Wireless BT receiver antenna for better signal.
10. AUX INPUT JACKS: Connect AUX input to these jacks.
11. DIGITAL MP3 PLAYER
• Support USB SD Card
• Music format: Mp3, WMA , WAV
• Connect via Wireless BT, Compatible Wireless BT: version 5.0
• With LCD dispIay, shows ID3 format.
• FM: 87.0 - 108MHz
• 6 Preset digital EQ eect.
USB, SD, Wireless BT/FM mode
Forward/Next channels
Play/Pause/Scan
Reverse/Previous channels
RPT: SD/USB repeat Play
FM Radio
• Press key to select FM radio mode.MODE
• Press key once, then it will begin to scan the FM frequency range and set
P1 to P30 stations.
• Press or key to select the desired stations or use the track select key in
1 to 30 get the desired stations.
Wireless BT Audio Playback Operation
• Press key to select Wireless BT mode.MODE
• Enable the Wireless BT function of your external gadget and search the
Wireless BT ID of the product then connect. Once connected, you can play the
audio les in your gadget and listen your favonite music with high power
audio output of the product.

Produktspezifikationen

Marke: Pyle
Kategorie: Empfänger
Modell: PTA1000BT

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pyle PTA1000BT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Empfänger Pyle

Pyle

Pyle PTAU45.5 Bedienungsanleitung

22 September 2024
Pyle

Pyle PPG-460A Bedienungsanleitung

14 September 2024
Pyle

Pyle PLMRMB2CW Bedienungsanleitung

11 September 2024
Pyle

Pyle Pro PTAU23 Bedienungsanleitung

6 September 2024
Pyle

Pyle INV500DBA Bedienungsanleitung

5 September 2024
Pyle

Pyle PDA4BU Bedienungsanleitung

3 September 2024
Pyle

Pyle PD1000BA Bedienungsanleitung

1 September 2024
Pyle

Pyle Elite UPLMRA430BT Bedienungsanleitung

1 September 2024
Pyle

Pyle PT1100 Bedienungsanleitung

31 August 2024
Pyle

Pyle PFA100 Bedienungsanleitung

31 August 2024

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-

Rotel

Rotel RA‑1592MKII Bedienungsanleitung

16 Oktober 2024
Denon

Denon AVR-S900W Bedienungsanleitung

16 Oktober 2024
Pro-Ject

Pro-Ject Amp Box DS2 Bedienungsanleitung

15 Oktober 2024
AKG

AKG HP12U Bedienungsanleitung

15 Oktober 2024
Sennheiser

Sennheiser EM 9046 SU Bedienungsanleitung

14 Oktober 2024
Yamaha

Yamaha MusicCast RX-V481 Bedienungsanleitung

14 Oktober 2024
JL Audio

JL Audio VX600/6i Bedienungsanleitung

12 Oktober 2024
Pioneer

Pioneer SX-303RDS Bedienungsanleitung

10 Oktober 2024
Technics

Technics SA-160L Bedienungsanleitung

8 Oktober 2024
Avantree

Avantree Audiplex Bedienungsanleitung

7 Oktober 2024