Pyle PPHP1599AI Bedienungsanleitung

Pyle KFZ-Halterung PPHP1599AI

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pyle PPHP1599AI (8 Seiten) in der Kategorie KFZ-Halterung. Dieser Bedienungsanleitung war für 31 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8

USER’S MANUAL

PPHP1291 PPHP1591

PPHP1294A PPHP1594A

PPHP1299AI PPHP1599AI

www.pyleaudio.com

Before using your new Speaker System Please review the

following instructions, for the safety and investment.

INSTRUCTIONS

Before connecting the speaker, make sure the system is off and the controls on the minimum

level. On the contrary the system could damage

1. - Plug the power cable to the AC outlet and to the system and to the speaker

2. - Plug the Microphone in the “MIC” input

3.- Connect (CD, DECK, MP3, DVD, etc) on “LINE IN” input

4.- Turn on the systems. A green LED will light up to indicate the speaker is on

5.- Set the volume on the low level on the MIC and the LINE IN input

6.- Increase the master volume (place on the right side of LINE OUT* connector)

7.- Set TREBLE and BASS controls to equalize the sound.

8.- A red LED will light up when the system detects overload power. You will must decrease

the volume.

CAUTIONS

Do not place the microphone against the speaker, it can cause feedback echo and it will

damage the system

EXTRA FUNCTIONS

6.3 and canon connectors marked as LINE OUT can handle an amplifier or even another

powered speaker cabinet ,in cascade. On the bottom of the speaker there is a hole to place

a stand.

FEATURES:

PPHP1291: 12” 1000 Watt 2 Way Plastic Molded Speaker Cabinet

　• 12'' Woofer

　• 1.4'' Titanium Compression Driver

　• 1/4” and Speakon Jacks input

　• Frequency response: 50-20 KHz

　• Power :1000 Watts

　• Impedance: 8 ohm

　• Crossover Frequency: 3.5K Hz

　• 35mm Speaker Stand Mount

　• Dimensions: W15.6” x D12” x H 23.3”

PPHP1294A: 12” 1000 Watt Powered 2 Way Plastic Molded Speaker Cabinet

　• 12" Woofer

　• 1.4" Titanium Compression Driver

　• Dual XLR and 1/4" Mic Inputs

　• XLR Stereo RCA Line Input

　• XLR and 1/4" Line Outputs

　• Master Volume, Bass Treble Controls

　• Frequency response: 50-20 KHz

　• Power Output: 1000 Watts

　• Crossover Frequency: 3.5K Hz

　• 35mm Speaker Stand Mount

　• 110/220 Voltage Selectable

　• Dimensions: W15.6” x D12” x H 23.3”

PPHP1299AI: 12” 1000 Watt Powered 2 Way Plastic Molded Speaker Cabinet w/Built in

MP3 & Ipod Dock

　• Power Switch and Digital amplifier.

　• 12" Woofer

　• 1.4" Titanium Compression Driver

　• MP3 control with LCD display

• USB Terminal

• IPOD DOCK

• XLR and 1/4" Mic Inputs

　• XLR Stereo RCA Line Input

　• XLR and 1/4" Line Outputs

　• Volume, Bass Treble Controls

　• Frequency response: 50-20 KHz

Produktspezifikationen

Marke:	Pyle
Kategorie:	KFZ-Halterung
Modell:	PPHP1599AI
FM-Radio:	Nein
Bluetooth:	Nein
Produktfarbe:	Schwarz
Impedanz:	8 Ohm
Energiequelle:	AC
RMS-Leistung:	- W
Equalizer:	Nein
AC Eingangsspannung:	110 - 220 V
Anzahl USB 2.0 Anschlüsse:	1
Gleichstrom-Anschluss (DC):	Ja
Display:	LCD
Audio Kanäle:	- Kanäle
Treiberdurchmesser:	391 mm
Frequenzbereich:	40 - 22000 Hz
Mikrofon-Eingang:	Ja
Abmessungen (BxTxH):	462.3 x 370.8 x 711.2 mm
Empfindlichkeit:	101 dB
Apple-Docking-Kompatibilität:	iPod
Spitzenstrom:	1600 W