Pyle PPHP1293 Bedienungsanleitung

Pyle Lautsprecher PPHP1293

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pyle PPHP1293 (2 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
1.Microphone input 11/12.Signal output
Allows you to connect a microphone Use this jack to connect cenother
with a 6.3mm connector. amplifier or even another powered
Is used microphone Input and Line speaker cabinet in cascade
input. using a cannon conneltor
2.Banlanced Microphone Input 14.AC power
Connector for a balanced microphone To connect the AC power cord
input and line input.
15.On/Off Power Switch
3.Mic/Line input button Press to power on/off the speak box
Keep this button up, the single will be in,
keep this button down, the MIC will be in 16.MP3 LCD
4.Microphone control 17.Button
Use this control to set the volume level Use it to power on/off Mp3 player
of the microphone(6.3mm or balanced) controller
5.RCA Line-In 18.Usb connector
Allows you to connect an externel audio Use it to plug in a USB device with Mp3
device(CD, radio / DVD,etc) with RCA file
connectors
19.MP3 control
6.Cannon Line-In Use this control to set the Volume level
Allows you to connect an external audio of the Mp3
device (CD, radio / DVD,etc) with
cannon connectors
7.Line-In signal volume control
Use this control to set the volume level
of the Line-In signal
8.Volume control
Set the volume level
9.Treble
Use it to set the treble level
10.Bass
Use it to set the bass level
4
1
2
5
14
15
9
10
11
3
8
PPHP153MPPHP123M
7
12
6
1
2
4
3
9
10
8
11
15
14
FEATURES
PPHP1293:
12'' 800 Watt 2 Way Plastic Molded Speaker
Cabinet
PPHP1298A:
12'' 800 Watt Powered 2 Way Plastic Molded
Speaker Cabinet
PPHP1593:
15’' 1000 Watt 2 Way Plastic Molded Speaker
Cabinet
PPHP1598A:
15” 1000 Watts Powered 2 Way Plastic Molded
Speaker System
-15” Woofer
- 12” Woofer
-1.75” Titanium Compression Driver
- 1.5” Titanium Compression Driver
-Full Featured 3 Channel Mixer
- Dual 1/4” and Dual Speakeon Jacks
-Dual XLR and 1/4” Mic Inputs
- Frequency Response: (-10dB): 47Hz - 18 Khz
-XLR & Stereo RCA Line Input
- 2 Way Ported Enclosure for Extra Bass Response
-XLR and 1/4” Line Outputs
- Power Max: 800 Watts
-Master Volume, Bass & Treble Controls
- Power RMS: 400 Watts
-Frequency Response: 35Hz - 20 KHz
- Sensitivity: 92dB/W/M
-Power Output: 500 Watts RMS, 1000 Watts Peak
- Crossover Frequency: 3.0K Hz
-Crossover Frequency: 3.0K Hz
- 35mm Speaker Stand Mount
-35mm Speaker Stand Mount
- Dimensions: (H)23.6” x (W)18” x (D)13.2”
-110/220 Voltage Selectable
- Weight: 31 Lbs
-Dimensions: W20” (f)12” (b)x D16” x H28.5”
-Weight: 49 Lbs
-Wheels Handles Included
- 12” Woofer
- 1.5” Titanium Compression Driver
- Full Featured 3 Channel Mixer
- Dual XLR and 1/4” Mic Inputs
- XLR & Stereo RCA Line Input
- XLR and 1/4” Line Outputs
- Master Volume, Bass & Treble Controls
- Frequency Response: 47Hz - 18 Khz
- Power Output: 400 Watts RMS, 800 Watts Peak
- Crossover Frequency: 3.0K Hz
- 35mm Speaker Stand Mount
- 110/220 Voltage Selectable
- Dimensions: W19” (f)11” (b)x D14.5” x H24.5”
- Weight: 38 Lbs
- 15” Woofer
- 1.75” Titanium Compression Driver
- Dual 1/4” and Dual Speakeon Jacks
- Frequency Response: (-10dB): 35Hz - 20 Khz
- 2 Way Ported Enclosure for Extra Bass Response
- Power Max: 1000 Watts
- Power RMS: 500 Watts
- Sensitivity: 97dB/W/M
- Impedance: 8 ohm
- Crossover Frequency: 3.0K Hz
- 35mm Speaker Stand Mount
- Dimensions: (H)28” x (W)18.8” x (D)15.2”
- Weight: 42 Lbs
- Wheels Handles Included
USER’S MANUAL
PPHP1293
PPHP1298A
PPHP1593
PPHP1598A
www.pyleaudio.com
Before using your new Speaker System Please review the
following instructions, for the safety and investment.
INSTRUCTIONS
Before connecting the speaker, make sure the system is off and the controls on the minimum level. On the
contrary the system could damage
1.Plug the power cable to the AC outlet and to the system and the speaker
2.Plug the microphone in the “MIC” input
3.Connect (CD, DECK, MP3, DVD, etc) on “LINE IN” input
4.Turn on the systems. A green LED will light up to indicate the speaker is on
5.Set the volume on the low level on the MIC and the LINE IN input
6.Increase the master volume (place on the right side of the LINE OUT *connector)
7.Set TREBLE and BASS controls to equalize the sound
8.A red LED will light up when the system detects overload power. You will must decrease the volume.
CAUTIONS
Do not place the microphone against the speaker, it can cause feedback echo and it will damage the system
EXTRA FUNCTIONS
6.3 And canon connectors marker as LINE OUT can handle an amplifier or even another powered speaker
cabinet, in cascade. On the bottom of the speaker there is a hole to place a stand.
Electrical safety
All products are fitted with a detachable power cord (supplied) which connects to the AC mains and the back panel of the
loudspeaker. The power cord has an IEC female connector on one end and male mains connectors on the other end. This
cord is supplied specially to accommodate the different worldwide safety and electrical code requirements. The power
cord supplied with your product has a 3-pin type plug. Do not cut off or damage the grounding plug. Like any electrical
appliance, your EON powered speakers should not be used in water or when wet.
Product design and specifications are subject
to change without previous notice.
SPECIFICATIONS:
Woofer
Impedance
Impedance
Sensitivity
Sensitivity
Freq.Resp
Freq.Resp
Diameter
Magnet
Tweeter
Coil Diameter
PPHP1293 PPHP1298A PPHP1593 PPHP1598A
8 ohms 8 ohms 8 ohms 8 ohms
95 dB/m/w 95 dB/m/w 97 dB/m/w 96 dB/m/w
8 ohms 8 ohms 8 ohms 8 ohms
12”
2.5” 2.5” 3”
12” 12” 15”
50 oz 50 oz 60 oz 60 oz
3”
45Hz-5000KHz 45Hz-5000KHz 30Hz-3500KHz
800Hz-20KHz 800Hz-20KHz 800Hz-20KHz 800Hz-20KHz
30Hz-3500KHz
100 dB/m/w 100 dB/m/w 100 dB/m/w 100 dB/m/w
Magnet
Coil Diameter
Built-in Amplifier
13.5 oz
(90*40*15)
13.5 oz
(90*40*15)
YESNO NONO
21 oz
(115*56*15)
21 oz
(115*56*15)
1.35” (34.4mm) 1.35” (34.4mm) 1.75”(44.4mm)1.75”(44.4mm)
NO.PPHP1293
NO.PPHP1593

Produktspezifikationen

Marke: Pyle
Kategorie: Lautsprecher
Modell: PPHP1293

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pyle PPHP1293 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Lautsprecher Pyle

Pyle

Pyle PBMSPG6 Bedienungsanleitung

15 Oktober 2024
Pyle

Pyle PDWR64BTW Bedienungsanleitung

14 Oktober 2024
Pyle

Pyle PLATV85BT Bedienungsanleitung

5 Oktober 2024
Pyle

Pyle PLUTV47R Bedienungsanleitung

5 Oktober 2024
Pyle

Pyle PWMA600 Bedienungsanleitung

4 Oktober 2024
Pyle

Pyle PLMR60W Bedienungsanleitung

24 September 2024
Pyle

Pyle PPHP1295 Bedienungsanleitung

20 September 2024
Pyle

Pyle PLUTV41BK Bedienungsanleitung

19 September 2024
Pyle

Pyle PPHP158BMA Bedienungsanleitung

18 September 2024
Pyle

Pyle PBKSRB40 Bedienungsanleitung

17 September 2024

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-

Sonance

Sonance Visual Performance VP65 SST Bedienungsanleitung

16 Oktober 2024
Bowers And Wilkins

Bowers And Wilkins CWM664 Bedienungsanleitung

16 Oktober 2024
Focal

Focal Chorus 826 V Bedienungsanleitung

16 Oktober 2024
KEF

KEF Ci200ER Bedienungsanleitung

16 Oktober 2024
Steren

Steren SPK-1100BL Bedienungsanleitung

16 Oktober 2024
Aiwa

Aiwa SP-A100 Bedienungsanleitung

16 Oktober 2024
Trust

Trust GXT 628 Bedienungsanleitung

15 Oktober 2024
Marshall

Marshall Tufton Bedienungsanleitung

15 Oktober 2024
Sunstech

Sunstech SPUBT780 Bedienungsanleitung

15 Oktober 2024
Sharp

Sharp PS-932 Bedienungsanleitung

15 Oktober 2024