Pyle PLUTV61BK Bedienungsanleitung

Pyle Lautsprecher PLUTV61BK

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pyle PLUTV61BK (10 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/10
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
www.PyleUSA.com
2
www.PyleUSA.com
3
PLUTV61BK Speaker Installation
Speaker Mounting suggestion as below:
Step 1: Removing the top half of clamp
Put the PLUTV61BK speaker in a safe place.
Using the 1/4” Hex key, remove the top clamp bolts.
Step2/3: To adjust mounting clamp angle and speaker position
Diagram A is to show there are four round pins underneath the bottom
base of aluminum die cast clamp, which can be inserted and xed to four
round notch holes on top of plastic cabinet as diagram B shows by every
45 degrees adjustment either at clockwise or counter clockwise direction.
Through such design, user can change the angle of swivel clamp, use the
5/16” hex key to loose the center screw a little bit and lift the bottom clamp
to twist speaker angle by every 45 degrees to get the optimal angle you
want. Then re-making sure the pins on base of bottom clamp are inserted
and sits on notch holes on top of plastic cabinet at and seamlessly.
Then re-tighten the center hex screw to secure the bottom clamp strongly.
Step 4: Securing clamp bolts
Using the correct rubber pads (labeled for O.D.) install on both top and
bottom half of clamps. 3.15” x 1.2” x 0.2” rubber pads for 1.75” O.D. 3.15” x
1.2” x 0.08” rubber pads for 2” - 3” O.D. Using the 1/4” Hex bit socket hand
tighten the bolts evenly (both sides should have the same spacing
between bolts).
Step 5: Option for adjustable PYLE logo---Unbolt the screws rst, adjust the logo
direction, then re-x screws.
Features:
Pro Audio PowerSport Speakers
Compact & High-Powered Output
Marine Grade Rated Construction
Weatherproof & Water-Resistant Housing
Sound System: (2) x 6.5'' Woofers + (2) x 1’ Tweeters
2-Way Full Range Stereo Sound Reproduction
Impressive Bass Response
Integrated Speaker Wiring for Quick Connection
Sleek Design, Machine Molded Speaker Cabinet Housing
Rugged, Universal Mount Bracket Design for Roll-Bar / Roll-Cage
Used for O-Road Outdoor Vehicles: ATV, UTV, 4x4, Jeeps, Marine Watercraft
What’s in the Box:
(2) 6.5'' -inch ATV/UTV Speakers
(2) Speaker Connection Wires, 6.5' ft.
(2) 3” Aluminum Mounting Brackets (Pre-Installed on Speakers)
(4) 3.15” x 1.2” x 0.2” Inches Rubber Pads
(4) 3.15” x 1.2” x 0.08”Inches Rubber Pads
(4) M8 x 55mm Hexagon Socket Head Cap Screws
(4) M8 x 35mm Hexagon Socket Head Cap Screws (Pre-Installed)
Marine/PowerSports Tower Technical Specs:
Power Output: 1200 Watts
Marine Grade Waterproof Rating: IP-X6
Speaker Size: 6.5’ -inch (Each)
Speaker Style: Passive Speakers
Speaker Type: Polypropylene Cone, Butyl Rubber Surround (x2)
Tweeter Type: Neodymium Dome (x2)
Impedance: 4 Ohm
Magnet Type: 32 oz. Circuit
Mid-Woofer Voice Coil Type: 1'', TIL
Sensitivity: 92 dB +/- 2 dB @ 1M/1W
Universal Mounting Brackets Roll-Bar/Roll-Cage Diameter: 1.75’ ~ 3.0’ –inches
1.75”~2” for Motorsports/ Powersports Application.
2.25”~3” for Marine Application.
Speaker Dimensions: 8.1’ x 8.9’ x 10.5’ -inches, with Bracket (-Each)
5/16”
Hex key
1/4”
Hex key
45°
Diagram A
Diagram B


Produktspezifikationen

Marke: Pyle
Kategorie: Lautsprecher
Modell: PLUTV61BK

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pyle PLUTV61BK benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher Pyle

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-