Pyle PLDVRCAM44 Bedienungsanleitung

Pyle Rückfahrkamera PLDVRCAM44

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pyle PLDVRCAM44 (8 Seiten) in der Kategorie Rückfahrkamera. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
PLDVRCAM44
Dual Camera Video Recording System
with Full HD 1080p
USER MANUAL
VEHICLE DVR DASH CAM KIT
www.PyleUSA.com
2
BASIC KEY FUNCTION
1. Mode Button
A: Press Mode button to switch Video / Photo /playback
mode in standby;
B: Short press to lock current video le while recording.
2. Up Button
A: In standby, its used to switch between the front camera
and rear camera.
B: In setting menu, its used to select the marker.
3. OK Button
Conrmation button.
A: Short press to start and stop recording; Or short press to
turn on screen in screen saver.
B: Long press to power on and shut down
www.PyleUSA.com
3
4. Down Button
A: Short press to turn on/o audio recording.
B: To select the marker in setting menu
5. Menu Button
Short press to pull out the setting menu.
Installation Guide
1. Before power on, insert micro SD card into device. Please
use high speed micro SD card (Class 10 or above), capacity
no less than 8GBMaximum support card up to 32GB.
2. Install the suction cup mount and mount it near the
rearview mirror (recommended)
3. Plug the original car charger into the car cigarette lighter.
4. Connect the car charger to the camera and route the
cable. (along the edge of the windshield.)
5. Installed the rear camera near the license plate, (be careful
with the direction of the camera) Cable can be UP/DOWN
laid along the vehicle roof, after the installation, connect
the rear camera with the main device.
6. Start the engine, the camera should power on
automatically, and check the installation angle and other
functions.
Attention:
1. Please check the rear camera image to ensure proper
direction.
2. The installation requires some professional skill, if you are
not familiar with such work, you can go to the auto shop.
Function Introduction
1. Auto recording feature
With the car engine starts up, the camera will automatically
power on and start recording, charging indicator lights and
video indicator lights blinking. After the engine turns o,
the camera will automatically saves record les and shut


Produktspezifikationen

Marke: Pyle
Kategorie: Rückfahrkamera
Modell: PLDVRCAM44

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pyle PLDVRCAM44 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Rückfahrkamera Pyle

Bedienungsanleitung Rückfahrkamera

Neueste Bedienungsanleitung für -Kategorien-