Pyle PDWR69BTB Bedienungsanleitung

Pyle Lautsprecher PDWR69BTB

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pyle PDWR69BTB (3 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/3
www.PyleUSA.comwww.PyleUSA.com
Wall Mountable, 100 Watts MAX
with 2-Way Full Range Stereo
Sound Reproduction, Pair
PDWR69BTB - PDWR69BTW
6.5'' Pro Active Wireless BT
Streaming Speakers
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
Note:
Anytime you note distortion, reduce the volume to a lower setting. Never
allow your amplier to be driven into " ". Otherwise the speakers clipping
may be damaged. Damage caused by operating the speakers at distorted
volume levels is not covered by the warranty.
WIRELESS BT PAIRING
Ensure the speaker is connected to the power supply and turned on.
Any BT device (such as phones, tablets, laptops etc.) is available for pairing.
Note:
• There will be a prompt sound when BT is connected/disconnected.
• BT Input has the priority when BT input and RCA input are connected
simultaneously. To listen to RCA input audio, disconnect from BT before
using a RCA input device.
• One device can only connects or control one BT speaker at a time.
If device A connects and controls BT, device B cannot search or control the
BT speaker. Device A MUST no longer be connected, then device 8 can
connect and control.
• If pairing fails the rst time, restart all the equipment and then follow the
above instructions.
• If you are unable to reconnect a previously connected device, remove the
" " from the list of paired devices, and then follow the above PyleUSA
instructions again.
• The BT connection will be lost if the distance between the speaker and the
BT device exceeds 1Om (32.8 ft.).
PyleUSAPyleUSA
1. Open the setting
menu and select BT.
2. Turn on BT and
search devices.
3. Click "PyleUSA"to
pair with your device.
CARE AND MAINTENANCE
• Turn off the power to the speaker when unused for long periods of time.
• Ensure all equipment is turned off prior to cleaning. Surfaces and cabinet
need only occasional dusting/cleaning. Never use chemicals or solvents as
they may damage the surface. Always clean using a dry cloth.
• Never touch the speaker drivers.
Technical Specs:
• Power Supply: 100W (MAX Power)
• RMS Power: 50W (Passive Speaker)
• Speaker Size: Sound System: 6.5'' Subwoofers: 0.5'' Tweeter
• Subwoofer Type: 6.5'' Paper Cone
• Tweeter Type: 0.5'' Mylar Dome
• Frequency Response: 70-20 kHz (+/-3dB)
• Speaker Impedance: 8 Ohm
• Audio Sensitivity: 86dB
• Construction Material: Polypropylene
• Power Cable Length: 3.94 ft.
• Power Output: 100-240V
• Single Speaker Dimensions (L x W x H): 8.5'' x 7.6'' x 11.7'' -inches
www.PyleUSA.com www.PyleUSA.com
SAFETY INSTRUCTIONS
• Please read the instructions carefully before installation and use.
Keep the manual safe for future reference.
• Prior to installing the speakers into any wall, check the structure for weight
bearing ability and avoid contact with any wiring or plumbing that might
be behind the surface area. Installing on soft materials or in areas incapable
of supporting the speakers' weight may cause personal injury or damage
to the speaker.
• Make sure the speaker is properly secured to the wall. Please use the proper
screws, bolts, or anchors. Failure to do so may cause the speaker to became
unsecured and cause potential damages/injuries.
• When installing the speakers outside, choose areas such as the underside of
eaves to avoid strong direct sunlight that may affect the color and life of
the speaker enclosure.
• Use only approved and certied wiring in your installation.
Do not stretch or place the wire in contact with sharp objects.
• Prior to removing cables, ensure all power to your amplier and other
components is turned off.
• Damage to the woofer and tweeter may occur if the speaker is dropped or
hit-resulting in no sound or distorted sound.
• Never overdrive your speakers to the point of distortion and always reduce
volume prior to switching input sources.
PREPARATION
The hardware equipment listed below is needed to install the speaker.
PACKING LIST
Ensure that you have received all parts according to the component checklist
prior to installation. If any parts are missing or faulty, contact your place of
purchase for a replacement.
www.PyleUSA.com
SPEAKER OVERVIEW 1. Aux Input
2. Loop: A signal output for connecting to the other active speaker or amplier.
3. Bass output for connecting to subwoofer.SUB:
4. 2-Pin terminal block for connecting to the passive Speaker Output:
speaker.
5. LED Indicator
6. RCA Input
7. 5-Pin European-Style Terminal Block: Connects to a balanced stereo
audio input.
8. Treble: Increase or decrease the high frequency response. The O position
produces a at response. Control range: -12 dB to +12 dB.
9. Increase or decrease the low frequency response. The 0 position Bass:
produces a at response. Control range: -12 dB to +12 dB
10. Volume Control
11. USB Input
12. Replay
13. Switches audio sources.Mode:
14. (Short Press)Previous
Rewind (Press and hold)
15. (Short Press) Next
Forward (Press and hold)
16. Play/Pause (Short Press)
TWS Pairing (Press and hold)
17. Power Switch: When this switch is on Auto position, the amplier will
automatically turn on when a signal is present and it will go standby
when there is no signal input in about 15 seconds.
18. AC Power Input
CONNECTION
• Ensure that the speaker is unplugged from the mains before making any
connections.
• Connect active and passive speakers as shown. Always check to ensure
polarity is correct: "+ +" to " ", and " " to "- -".

Produktspezifikationen

Marke: Pyle
Kategorie: Lautsprecher
Modell: PDWR69BTB

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pyle PDWR69BTB benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Lautsprecher Pyle

Pyle

Pyle PBMSPG6 Bedienungsanleitung

15 Oktober 2024
Pyle

Pyle PDWR64BTW Bedienungsanleitung

14 Oktober 2024
Pyle

Pyle PLATV85BT Bedienungsanleitung

5 Oktober 2024
Pyle

Pyle PLUTV47R Bedienungsanleitung

5 Oktober 2024
Pyle

Pyle PWMA600 Bedienungsanleitung

4 Oktober 2024
Pyle

Pyle PLMR60W Bedienungsanleitung

24 September 2024
Pyle

Pyle PPHP1295 Bedienungsanleitung

20 September 2024
Pyle

Pyle PLUTV41BK Bedienungsanleitung

19 September 2024
Pyle

Pyle PPHP158BMA Bedienungsanleitung

18 September 2024
Pyle

Pyle PBKSRB40 Bedienungsanleitung

17 September 2024

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-

Sonance

Sonance Visual Performance VP65 SST Bedienungsanleitung

16 Oktober 2024
Bowers And Wilkins

Bowers And Wilkins CWM664 Bedienungsanleitung

16 Oktober 2024
Focal

Focal Chorus 826 V Bedienungsanleitung

16 Oktober 2024
KEF

KEF Ci200ER Bedienungsanleitung

16 Oktober 2024
Steren

Steren SPK-1100BL Bedienungsanleitung

16 Oktober 2024
Aiwa

Aiwa SP-A100 Bedienungsanleitung

16 Oktober 2024
Trust

Trust GXT 628 Bedienungsanleitung

15 Oktober 2024
Marshall

Marshall Tufton Bedienungsanleitung

15 Oktober 2024
Sunstech

Sunstech SPUBT780 Bedienungsanleitung

15 Oktober 2024
Sharp

Sharp PS-932 Bedienungsanleitung

15 Oktober 2024