Pyle PDWR63 Bedienungsanleitung

Pyle Lautsprecher PDWR63

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pyle PDWR63 (2 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 20 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
OWNERS MANUAL
INDOOR/OUTDOOR
ALL WEATHER DESIGN
FIG 1:INDOOR/OUTDOOR SWITCH
INDOOR/OUTDOOR BASS BOOST SWITCH:
www.pyleaudio.com
PDWR33
WEATHERPROOF SPEAKER SYSTEMS
FOR MARINE-BOAT-PATIO AND POOL
PDWR53
PDWR63
PDWR3T
PDWR5T
PDWR6T
FIG 3:EAVE MOUNTING
FIG 4:OVERALL DIMENSIONS
Audio Experts Have Known For Years That Sound,And Bass Frequencies In
Particular,Lose Impact In Outdoor Environments. To Compensate,Many People
Will Turn Up The Volume,Overdriving Their System,And Damaging The
Speakers Components.
In Response,“PDWR”Speaker Designed A Unique Switch That Increases Bass
When In The “OUTDOOR”Position.At The Same Time,it Protects
“PDWR”Speaker
From Overdrive Damage In Exterior Applications.The Result Is Dramatically
Improved Sound Reproduction,More Reliable Operation,And Longer Life.
In The “INDOOR” Position,Performance is Automatically Adjusted To Produce
Optimum Results For Use Inside Rooms.
ALL WEATHER DESIGN:
The Materials Used In The Manufature Of “PDWR”Speakers Have Been
Carefully Selected ToStand UpTo Extremes Of Temperature (FROM-50 F TO 200
F),rain,
Snow,Heat,Salt Water,And The Sun sUV Rays. “PDWR” Is Ruggedly Constructed
With A Combination Of:(1)A Low-resonance Mineral-filled Polypropylene
Cabinet (2)Brass,Stainless Stell And Aluminum Hardware,And(3)Gold-plated
Binding Posts.
(1) Remove The Bracket Knobs And The Bracket From The Speaker
(2) Hold The Bracket UpTo The Mounting Surface.“Plmr” Can Be Mounted Either
Horizontally Or Vertically Hold The Bracket So That The Speaker Wire Fits，
Through The Large Circular Wire Hple In The Bracket,Align The Bracket To ，
Be Square With The Surrounding (Use A Level For Accuracy)
(3) Mark The Locations Of The Three Shaped Screw Holes Use All Of The ，
Holes
(4) Drill Pilot Holes Into The Mounting Surface
(5) Gently Pull The Speaker Wire Through The Wire Hole In The Center Of The
Mounting Bracket The Bracket So That The Holes All Line Up，
(6) Use Your Hardware To Attach The Bracket To The Mounting Surface
(1) After Checking That The Speaker Is In-phase And Works Correctly,
Angle TheSpeaker For The Best Sound
(2) Hand Tighten The Bracket Knobs Only,Power Tools May
Over-TightenThe Knob,And Strip The Threads Of The Insert
(3) Check That The Entire Installation Is Safe And Secure
FIG 2 : CONNECTING YOUR SPEAKER
NEGATIVE (BLACK)
POSITIVE (RED) INPUT
IMPORTANT:
CONNECT POSITIVE WIRE
IN-DOOR / OUT-DOOR
EQUALIZATION SWITCH
TO THE POSITIVE TERMINAL
OF YOUR AMPLIFIER OR RECEIVER
CONNECT NEGATIVE WIRE TO
THE NEGATIVE TERMINAL OF
YOUR AMPLIFIER OR RECEIVER
INPUT BINDING POST
BINDING POST
The Following Will assist you in connecting the indiviual speajers to
your amplifier or receiver.
(1) First turn your amplifier of to avoid damage which may result from
accidental shorting of the speaker leads
(2) Correct phase polarity is critical for proper stereo imagingand bass
performance.the red(+) terminal on your amplifier or receiver must
be connected to the red(+) terminal on your speaker,the same
applies for the balck(-) terminal
(3) Connect one loudspeaker at a time to ensure proper connection of
left and right channels,make sure all wires are firmly fastened
(4) If you notice a great jack of bass/or centrl image focus,double check
your connections for proper polarity
，
MOUNTING THE BRACKET
FINAL ADJUSTMENTS
FATURES :
PDWR33
Excellent For Monitor or Surround
Sound Applications
* 3-1/2” long Throw Woofer
* 1/2” Polymer Dome Tweeter
* 200 Watts Rated Peak Power
* Frequency Response70Hz-20KHz
* 8 Ohm Impedance
* Vented Design for High Power
and Deep Bass Response
* Heavy Duty Plastic Cabinet
* Gold Plated Plug Terminals
* Spring Loaded Mounting
BracketIncluded
*Quick Connect/Disconnect Terminals
* Dimensions：
5-5/8”(W)x8”(H)x4-7/8”(D)
PDWR3T
Excellent For Monitor or Surround
Sound Applications
* 3-1/2” long Throw Woofer
* 1/2” Polymer Dome Tweeter
* 200 Watts Rated Peak Power
* Frequency Response70Hz-20KHz
* 8 Ohm Impedance
* Vented Design for High Power
and Deep Bass Response
* Heavy Duty Plastic Cabinet
* Gold Plated Plug Terminals
* Spring Loaded Mounting
BracketIncluded
*Transformer Circuit For Impedance
Compatible
*Quick Connect/Disconnect Terminals
* Dimensions：
5-5/8”(W)x8”(H)x4-7/8”(D)
1. 2.
3. 4.
FIG 4:OVERALL DIMENSIONS
FATURES :
PDWR63
Excellent For Monitor or Surround
Sound Applications
* 6-1/2” long Throw Woofer
* 1” Polymer Dome Tweeter
* 350 Watts Rated Peak Power
* Frequency Response:50Hz-20KHz
* 8 Ohm Impedance
* Vented Design for High Power
and Deep Bass Response
* Heavy Duty Plastic Cabinet
* Gold Plated Plug Terminals
* Spring Loaded Mounting
BracketIncluded
*Quick Connect/Disconnect Terminals
* Dimensions：
9-1/4”(W)x13”(H)x7-3/8”(D)
PDWR6T
Excellent For Monitor or Surround
Sound Applications
* 6-1/2” long Throw Woofer
* 1” Polymer Dome Tweeter
* 350 Watts Rated Peak Power
* Frequency Response:50Hz-20KHz
* 8 Ohm Impedance
* Vented Design for High Power
and Deep Bass Response
* Heavy Duty Plastic Cabinet
* Gold Plated Plug Terminals
* Spring Loaded Mounting
BracketIncluded
*Transformer Circuit For Impedance
Compatible
*Quick Connect/Disconnect Terminals
* Dimensions：
9-1/4”(W)x13”(H)x7-3/8”(D)
238mm
(9-1/4”)
331mm
(13”)
188mm
(7-3/8”)
6.
FIG 4:OVERALL DIMENSIONS
FATURES :
PDWR53
Excellent For Monitor or Surround
Sound Applications
* 5-1/4” long Throw Woofer
* 1/2” Polymer Dome Tweeter
* 250 Watts Rated Peak Power
* Frequency Response 85Hz-20KHz:
* 8 Ohm Impedance
* Vented Design for High Power
and Deep Bass Response
* Heavy Duty Plastic Cabinet
* Gold Plated Plug Terminals
* Spring Loaded Mounting
BracketIncluded
*Quick Connect/Disconnect Terminals
* Dimensions：
7-1/8”(W)x9-7/8”(H)x5-3/4”(D)
PDWR5T
Excellent For Monitor or Surround
Sound Applications
* 5-1/4” long Throw Woofer
* 1/2” Polymer Dome Tweeter
* 250 Watts Rated Peak Power
* Frequency Response 85Hz-20KHz:
* 8 Ohm Impedance
* Vented Design for High Power
and Deep Bass Response
* Heavy Duty Plastic Cabinet
* Gold Plated Plug Terminals
* Spring Loaded Mounting
BracketIncluded
*Transformer Circuit For Impedance
Compatible
*Quick Connect/Disconnect Terminals
* Dimensions：
7-1/8”(W)x9-7/8”(H)x5-3/4”(D)
180mm
(7-1/8”)
250mm
(9-7/8”)
145mm
(5-3/4”)
5.
IN-DOOR OUT-DOOR
144mm
(5-5/8”)
204mm
(8”)
124mm
(4-7/8”)
OWNERS MANUAL
INDOOR/OUTDOOR
ALL WEATHER DESIGN
FIG 1:INDOOR/OUTDOOR SWITCH
INDOOR/OUTDOOR BASS BOOST SWITCH:
www.pyleaudio.com
PDWR33
WEATHERPROOF SPEAKER SYSTEMS
FOR MARINE-BOAT-PATIO AND POOL
PDWR53
PDWR63
PDWR3T
PDWR5T
PDWR6T
FIG 3:EAVE MOUNTING
FIG 4:OVERALL DIMENSIONS
Audio Experts Have Known For Years That Sound,And Bass Frequencies In
Particular,Lose Impact In Outdoor Environments. To Compensate,Many People
Will Turn Up The Volume,Overdriving Their System,And Damaging The
Speakers Components.
In Response,“PDWR”Speaker Designed A Unique Switch That Increases Bass
When In The “OUTDOOR”Position.At The Same Time,it Protects
“PDWR”Speaker
From Overdrive Damage In Exterior Applications.The Result Is Dramatically
Improved Sound Reproduction,More Reliable Operation,And Longer Life.
In The “INDOOR” Position,Performance is Automatically Adjusted To Produce
Optimum Results For Use Inside Rooms.
ALL WEATHER DESIGN:
The Materials Used In The Manufature Of “PDWR”Speakers Have Been
Carefully Selected ToStand UpTo Extremes Of Temperature (FROM-50 F TO 200
F),rain,
Snow,Heat,Salt Water,And The Sun sUV Rays. “PDWR” Is Ruggedly Constructed
With A Combination Of:(1)A Low-resonance Mineral-filled Polypropylene
Cabinet (2)Brass,Stainless Stell And Aluminum Hardware,And(3)Gold-plated
Binding Posts.
(1) Remove The Bracket Knobs And The Bracket From The Speaker
(2) Hold The Bracket UpTo The Mounting Surface.“Plmr” Can Be Mounted Either
Horizontally Or Vertically Hold The Bracket So That The Speaker Wire Fits，
Through The Large Circular Wire Hple In The Bracket,Align The Bracket To ，
Be Square With The Surrounding (Use A Level For Accuracy)
(3) Mark The Locations Of The Three Shaped Screw Holes Use All Of The ，
Holes
(4) Drill Pilot Holes Into The Mounting Surface
(5) Gently Pull The Speaker Wire Through The Wire Hole In The Center Of The
Mounting Bracket The Bracket So That The Holes All Line Up，
(6) Use Your Hardware To Attach The Bracket To The Mounting Surface
(1) After Checking That The Speaker Is In-phase And Works Correctly,
Angle TheSpeaker For The Best Sound
(2) Hand Tighten The Bracket Knobs Only,Power Tools May
Over-TightenThe Knob,And Strip The Threads Of The Insert
(3) Check That The Entire Installation Is Safe And Secure
FIG 2 : CONNECTING YOUR SPEAKER
NEGATIVE (BLACK)
POSITIVE (RED) INPUT
IMPORTANT:
CONNECT POSITIVE WIRE
IN-DOOR / OUT-DOOR
EQUALIZATION SWITCH
TO THE POSITIVE TERMINAL
OF YOUR AMPLIFIER OR RECEIVER
CONNECT NEGATIVE WIRE TO
THE NEGATIVE TERMINAL OF
YOUR AMPLIFIER OR RECEIVER
INPUT BINDING POST
BINDING POST
The Following Will assist you in connecting the indiviual speajers to
your amplifier or receiver.
(1) First turn your amplifier of to avoid damage which may result from
accidental shorting of the speaker leads
(2) Correct phase polarity is critical for proper stereo imagingand bass
performance.the red(+) terminal on your amplifier or receiver must
be connected to the red(+) terminal on your speaker,the same
applies for the balck(-) terminal
(3) Connect one loudspeaker at a time to ensure proper connection of
left and right channels,make sure all wires are firmly fastened
(4) If you notice a great jack of bass/or centrl image focus,double check
your connections for proper polarity
，
MOUNTING THE BRACKET
FINAL ADJUSTMENTS
FATURES :
PDWR33
Excellent For Monitor or Surround
Sound Applications
* 3-1/2” long Throw Woofer
* 1/2” Polymer Dome Tweeter
* 200 Watts Rated Peak Power
* Frequency Response70Hz-20KHz
* 8 Ohm Impedance
* Vented Design for High Power
and Deep Bass Response
* Heavy Duty Plastic Cabinet
* Gold Plated Plug Terminals
* Spring Loaded Mounting
BracketIncluded
*Quick Connect/Disconnect Terminals
* Dimensions：
5-5/8”(W)x8”(H)x4-7/8”(D)
PDWR3T
Excellent For Monitor or Surround
Sound Applications
* 3-1/2” long Throw Woofer
* 1/2” Polymer Dome Tweeter
* 200 Watts Rated Peak Power
* Frequency Response70Hz-20KHz
* 8 Ohm Impedance
* Vented Design for High Power
and Deep Bass Response
* Heavy Duty Plastic Cabinet
* Gold Plated Plug Terminals
* Spring Loaded Mounting
BracketIncluded
*Transformer Circuit For Impedance
Compatible
*Quick Connect/Disconnect Terminals
* Dimensions：
5-5/8”(W)x8”(H)x4-7/8”(D)
1. 2.
3. 4.
FIG 4:OVERALL DIMENSIONS
FATURES :
PDWR63
Excellent For Monitor or Surround
Sound Applications
* 6-1/2” long Throw Woofer
* 1” Polymer Dome Tweeter
* 350 Watts Rated Peak Power
* Frequency Response:50Hz-20KHz
* 8 Ohm Impedance
* Vented Design for High Power
and Deep Bass Response
* Heavy Duty Plastic Cabinet
* Gold Plated Plug Terminals
* Spring Loaded Mounting
BracketIncluded
*Quick Connect/Disconnect Terminals
* Dimensions：
9-1/4”(W)x13”(H)x7-3/8”(D)
PDWR6T
Excellent For Monitor or Surround
Sound Applications
* 6-1/2” long Throw Woofer
* 1” Polymer Dome Tweeter
* 350 Watts Rated Peak Power
* Frequency Response:50Hz-20KHz
* 8 Ohm Impedance
* Vented Design for High Power
and Deep Bass Response
* Heavy Duty Plastic Cabinet
* Gold Plated Plug Terminals
* Spring Loaded Mounting
BracketIncluded
*Transformer Circuit For Impedance
Compatible
*Quick Connect/Disconnect Terminals
* Dimensions：
9-1/4”(W)x13”(H)x7-3/8”(D)
238mm
(9-1/4”)
331mm
(13”)
188mm
(7-3/8”)
6.
FIG 4:OVERALL DIMENSIONS
FATURES :
PDWR53
Excellent For Monitor or Surround
Sound Applications
* 5-1/4” long Throw Woofer
* 1/2” Polymer Dome Tweeter
* 250 Watts Rated Peak Power
* Frequency Response 85Hz-20KHz:
* 8 Ohm Impedance
* Vented Design for High Power
and Deep Bass Response
* Heavy Duty Plastic Cabinet
* Gold Plated Plug Terminals
* Spring Loaded Mounting
BracketIncluded
*Quick Connect/Disconnect Terminals
* Dimensions：
7-1/8”(W)x9-7/8”(H)x5-3/4”(D)
PDWR5T
Excellent For Monitor or Surround
Sound Applications
* 5-1/4” long Throw Woofer
* 1/2” Polymer Dome Tweeter
* 250 Watts Rated Peak Power
* Frequency Response 85Hz-20KHz:
* 8 Ohm Impedance
* Vented Design for High Power
and Deep Bass Response
* Heavy Duty Plastic Cabinet
* Gold Plated Plug Terminals
* Spring Loaded Mounting
BracketIncluded
*Transformer Circuit For Impedance
Compatible
*Quick Connect/Disconnect Terminals
* Dimensions：
7-1/8”(W)x9-7/8”(H)x5-3/4”(D)
180mm
(7-1/8”)
250mm
(9-7/8”)
145mm
(5-3/4”)
5.
IN-DOOR OUT-DOOR
144mm
(5-5/8”)
204mm
(8”)
124mm
(4-7/8”)

Produktspezifikationen

Marke: Pyle
Kategorie: Lautsprecher
Modell: PDWR63

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pyle PDWR63 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Lautsprecher Pyle

Pyle

Pyle PBMSPG6 Bedienungsanleitung

15 Oktober 2024
Pyle

Pyle PDWR64BTW Bedienungsanleitung

14 Oktober 2024
Pyle

Pyle PLATV85BT Bedienungsanleitung

5 Oktober 2024
Pyle

Pyle PLUTV47R Bedienungsanleitung

5 Oktober 2024
Pyle

Pyle PWMA600 Bedienungsanleitung

4 Oktober 2024
Pyle

Pyle PLMR60W Bedienungsanleitung

24 September 2024
Pyle

Pyle PPHP1295 Bedienungsanleitung

20 September 2024
Pyle

Pyle PLUTV41BK Bedienungsanleitung

19 September 2024
Pyle

Pyle PPHP158BMA Bedienungsanleitung

18 September 2024
Pyle

Pyle PBKSRB40 Bedienungsanleitung

17 September 2024

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-

Sonance

Sonance Visual Performance VP65 SST Bedienungsanleitung

16 Oktober 2024
Bowers And Wilkins

Bowers And Wilkins CWM664 Bedienungsanleitung

16 Oktober 2024
Focal

Focal Chorus 826 V Bedienungsanleitung

16 Oktober 2024
KEF

KEF Ci200ER Bedienungsanleitung

16 Oktober 2024
Steren

Steren SPK-1100BL Bedienungsanleitung

16 Oktober 2024
Aiwa

Aiwa SP-A100 Bedienungsanleitung

16 Oktober 2024
Trust

Trust GXT 628 Bedienungsanleitung

15 Oktober 2024
Marshall

Marshall Tufton Bedienungsanleitung

15 Oktober 2024
Sunstech

Sunstech SPUBT780 Bedienungsanleitung

15 Oktober 2024
Sharp

Sharp PS-932 Bedienungsanleitung

15 Oktober 2024