Pyle PDKWM806B Bedienungsanleitung

Pyle Mikrofon PDKWM806B

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pyle PDKWM806B (5 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
PDKWM806B
UHF Dual Channel Wireless Handheld Microphone
Portable Digital Audio Sound Mixer Receiver Set
with Wireless BT Receiver System, Fixed Frequency
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
www.PyleUSA.com
2
www.PyleUSA.com
3
PLEASE READ THIS MANUAL CAREFULLY BEFORE USING AND STRICTLY
OPERATE AND STORE IN ACCORDANCE WITH THE INSTRUCTIONS.
PLEASE SAVE IT FOR YOUR FUTURE REFERENCE.
CAUTIONS
1. Do not use the unit under water, don't expose it to rain. Please store it in a
cool, dry place.
2. Please use and store it in normal temperature. Do ot move it from overheated
to supercooled condition frequently as well as keep away from heat sources
such as heater and oven.
3. When using and storing, please pay attention to dust and moisture.
4. Be careful to violent collision.
5. To avoid acoustical feed-back, do not hold the microphone close to the
loudspeakers.
6. For the best sound pick-up pattern do not hold your hand against the
microphone head.
7. Remove the batteries from the battery compartment when the device is not
used for a long time.
Features:
Hassle-Free Wireless Microphone System
Multi-Source Audio Signal Mixing Ability
Control Audio Levels from External Devices
Mixer Receiver System for Convenient Sound Level Adjustment
Wireless BT Music Streaming Ability
Dual Fixed Frequency System Design
Adjustable Rotary Controls: Echo, Tone, Volume: Mic 1, Mic 2
Wired Microphone Support
(2) 1/4’ Mic Inputs
RCA Audio (L/R) & Video Signal Input/Output Jacks
Rear Panel 1/4’ Mixed Output
Adjustable Antennas for Extended Wireless Range
Includes Handheld Wireless Microphones
Rugged Microphone Construction & Steel Mesh Grill
Convenient ON/OFF/MUTE Power Switch
Battery Operated Mic, Requires (2) 'AA' Batteries, Included
Ultra-Wide Frequency Range
Built-in Acoustic Pop Filter
Ideal for speech, Karaoke, DJ Sound & House Party Audio
Wireless BT Connectivity:
Simple & Hassle-Free Pairing
Works with All of Your Favorite Devices
(Smartphones, Tablets, Laptops, Computers, etc.)
Wireless BT Network Name: 'PYLEUSA'
Wireless BT Version: 4.2
Wireless BT Range: 60’ ft
What's in the Box:
Audio Mixer Receiver
Wall Power Adapter
1/4’ Audio Cable
3.5mm to 2RCA Audio Cable
Technical Specs:
UHF Fixed Frequency: S12: 517.6MHz(F1) +521.5MHz(F2);
S34: 533.7MHz(F3)+537.2MHz(F4)
Wireless Operation Range: Up to 165’+ ft.
Modulation Mode: FM
Maximum Deviation: +/-75KHz
Frequency Response: 80-18kHz (+/-3dB)
Frequency Stability: 20ppm
Audio Dynamic Range: >90dB
S/N Ratio: >95dB
T.H.D: <0.5%
Mirror Image Rejection: >50dB
LINE Input Sensitivity: 380mV/-8.5dB
MIC Input Sensitivity: 5mV/-46dB
LINE Input Impedance: 20 KΩ
MIC Input Impedance: 600Ω
Receiver Power Supply: 110/240V (18V/500mA Power Adapter)
Mic Element: Dynamic
Antenna: Built-in Housing
RF Output: <10mW
Spurious Emission: <-40dB
Battery Operated Mic, Requires (2) 'AA' Batteries Each
Current Dissipation: <120mA
Microphone Dimensions (L x D): 9.6’ x 1.5’ (Each)
Base Receiver Dimensions (L x W x H): 8.3’ x 4.4’ x 1.7’
(2) Audio + Video (3RCA) Cables
(2) Handheld Microphones
(4) 'AA' Batteries
www.PyleUSA.com
4
www.PyleUSA.com
5
HANDHELD MICROPHONE
1. Grille (capsule inside)
2. Power/low battery Indicator
3. Power SwitchON/OFF/MUTE
4. Battery Compartment/Cover
Operation
1. Open battery cover. Install the provided 2pcs 1.5V AA batteries and then
close the cover. Pay attention to the correct polarity.
2. Slide power switch to "ON" position to turn on the microphone. Power indicator
will ash once and then go o. This indicates correct operation.
3. Now receiver RF indicator should light. Please conrm frequency of
microphone same as the receiver before operation.
4. Slide power switch to center "MUTE" position to mute the sound.
5. During operation if power indicator lights red, this indicates the battery is Iow.
Please replace new battery.
6. If the microphone is not going to be used for any length of time, please slide
power switch to OFF position and remove the battery.
RECEIVER
Front Panel
Rear Panel
1. Main Power: Press to switch the unit power to ON and OFF.
2. Rotate the echo knob to your desired level.ECHO:
3. The indicator will light red when wireless microphone 1 is on.RF 1:
4. The indicator will light green when speak to wireless microphone 1.AF 1:
5. When main power is ON, the indicator will ash blue fast to be ready to BT:
connect BT audio device. After BT audio device is connected the indicator will
light constant blue. When audio device is playing the indicator will ash blue
slowly.
6. The indicator will light red when wireless microphone 2 is on.RF 2:
7. The indicator will light green when speak to wireless microphone 2.AF 2:
8. W/MIC 1: Rotate to adjust the volume of the wireless microphone 1 and wired
dynamic MIC 1.
9. W/MIC 2: Rotate to adjust the volume of the wireless microphone 2 and wired
dynamic MIC 2.
10. TONE: This control is used to adjust the bass, treble quality of the microphone
sound. The bass is decreased and treble is increased when the control turned
clockwise. The bass is increased and treble is decreased when the control
turned counter clockwise.
11. Rotate to adjust the volume of music.MUSIC:
12. Insert the 6.3mm plug of wired dynamic MIC into MIC 1 Jack.MIC IN 1:
13. Insert another 6.3mm plug of wired dynamic MIC into MIC 2 Jack.MIC IN 2:
14. ANT. B: Receiving antenna of the wireless microphone 2.
15. Video input jack (RCA type): Connect this RCA Jack to DVD, Streamer,
Set-Top Box or any other A/V source for video in.
16. Audio input jack (RCA type): Connect this set of RCA Jack to DVD, Streamer,
Set-Top Box or any other A/V or Audio source for audio in.
17. Video output jack (RCA type): Connect this RCA Jack to TV or Screens for
video out.
18. Connect this set of RCA Jack to Active Audio output jack (RCA type):
Speakers, Hi Fi system for audio out(mixed music and MIC signal).
19. Alternatively connect this jack to MIC IN of your amplier for AF OUT (6.35):
audio out (mixed music and MIC signal).
20. Connect DC jack of supplied AC / DC adapter to this jack.DC IN:
21. ANT. A: Receiving antenna of the wireless microphone 1.
1 2 3 4
1 2
4 5 6 7
8 11 12 139 10
3
14 15 2118 19 201716


Produktspezifikationen

Marke: Pyle
Kategorie: Mikrofon
Modell: PDKWM806B

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pyle PDKWM806B benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Mikrofon Pyle

Bedienungsanleitung Mikrofon

Neueste Bedienungsanleitung für -Kategorien-