Pyle PDA7BU Bedienungsanleitung

Pyle Empfänger PDA7BU

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pyle PDA7BU (6 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 19 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
www.PyleUSA.com
1
WARNING!
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER OF THIS UNIT.
THERE ARE NO USER - SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED TECHNICIAN.
The lighting ash with arrow head symbol within an equilateral triangle is intended to alert the user
to the presence of dangerous voltage within the products enclosure that may be of sucient
magnitude to constitute a risk of Electric shock to humans. Users should exhibit extra safety when
this symbol appears in this instruction manual and follow all precautions as they are stated.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in this manual.
1. Read these instructions thoroughly before using this item.
2. Keep these instructions for future reference.
3. Heed all warnings.
4. Follow all instructions.
5. WARNING: To prevent re or electric shock, do not expose this equipment to rain or moisture. Do not
store or operate this product near any liquids.
6. Clean only with a dry cloth.
7. Do not store or operate this product near any heat sources such as radiators, heat registers, stoves, or
other apparatuses (including ampliers) that produce heat.
8. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding plug has two blades and a round grounding prong.
The wide blade or third prong is provided for your safety. If the provided plug does not t your outlet,
consult an electrician for the replacement of the obsolete outlet.
9. Protect the all wires connected to this unit from being walked on or pinched, particularly plugs and the
point where they exit from the unit. When removing the cord from the power outlet, remove it by holding
the plug not by pulling the cord.
10. Unplug the unit during lighting storms or when unused for long periods of time.
11. When wiring this unit and all other equipment used in connection to this unit make sure that all of your
equipment is turned OFF.
12. Once installation and wiring is complete power on all your equipment with the volume and level
controls turned DOWN. Once all the equipment is ON slowly raise the volume or level controls to their
proper positions.
13. When grounding this unit, be sure to do so correctly, so as not to defeat the built-in grounding in this
unit.
14. Before placing, installing, rigging, or suspending any product, inspect all hardware, suspension, cabinets,
transducers, brackets and associated equipment for damage. Any missing, corroded, deformed, or
non-load rated component could signicantly reduce the strength of the installation, placement or
array. Any such condition severely reduces the safety of the installation and should be immediately
corrected. Use only hardware which is rated for the loading conditions of the installation and any
possible short-term, unexpected overloading. Never exceed the rating of the hardware or equipment.
15. Consult a licensed, professional engineer regarding physical equipment installation. Ensure that all local,
state and national regulations regarding the safety and operation of equipment are understood and
adhered to.
16. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Introduction
To get the most from your PDA7BU, it is recommended that you review all of the information provided in
the instruction manual before operating the equipment.
www.PyleUSA.com
2
PDA7BU FRONT & BACK PANEL
1. POWER SWITCH: Switch to power the unit on and o.
2. Adjust the depth of echo eect by increasing or decreasing the level by MICROPHONE ECHO KNOB:
turning this knob.
3. MICROPHONE VOLUME KNOB: Turn this knob to adjust the volume of the microphone
4. USB PORT/SD CARD SLOT: Insert USB mass storage device or SD Card to play Mp3 les.
NOTE: The USB input is ONLY meant to connect a USB ash drive (thumb drive). Connecting an
MP3 player or computer directly to the USB ash drive input will result the unit of failing to play the
audio from those devices.
5. REMOTE RECEIVER WINDOW: To receive the remote control signal.
6. MICROPHONE INPUT 1 JACK: MIC 1 Input Jack for connecting an unbalanced low impedance
microphone with 1/4” TRS plug.
7. MICROPHONE INPUT 2 JACK: MIC 2 Input Jack for connecting an unbalanced low impedance
microphone with 1/4” plug.
8. LCD DISPLAY SCREEN


Produktspezifikationen

Marke: Pyle
Kategorie: Empfänger
Modell: PDA7BU

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pyle PDA7BU benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Empfänger Pyle

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-