Pyle PADH1579 Bedienungsanleitung

Pyle Lautsprecher PADH1579

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pyle PADH1579 (7 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 21 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/7











  



  



  



Introduction

Thank you for purchasing this Pyle Pro PADH series speaker The

loudspeaker is designed to provide you years of high performance in any

application that you require. Please read this manual carefully to fully

maximize the performance of the speaker.

Maintenance and Safety

• Do not expose the speaker to moisture.

• Avoid hot and cold temperature extremes.

• Clean using a damp cloth. Make sure that no moisture contacts the

drivers. You can use a hand vacuum to clean the carpet.

• Do not attempt to service the unit. Refer service to a certified Pyle Pro

technician.

• This loudspeaker is capable of producing extremely high SPL levels.

Use earplugs when necessary.

Features

The PADH series features high-level

drivers and rugged components and is

designed for high-performance applications.

The cabinet features heavy-duty

construction with reinforced corners. It is

covered with a black-carpeted finish that

will stand up to years of tour duty. The

integrated handles have been carefully

selected for their ergonomic design and

durability.

All models are loaded with a

premium Kapton voice coil woofer and

exhibit excellent bass response. The

compression driver provides warm midrange

reproduction and crystal clear highs.

The integrated passive crossover network is assembled using quality

components and efficiently directs the frequencies to the proper drivers.



There is a flush mounted 35mm speaker stand

adapter on the bottom side of the cabinet.

Connections

Your PADH series

speaker has an extremely

flexible connection panel.

There are two Speakon jacks

as well as two ¼” jacks. You

can also hookup your speaker

cabinet using the “Quick

Connect” speaker terminals,

which accommodate either

wire leads or a banana plug.

The jacks are wired in

parallel, which allows you to

daisy chain additional

speakers. Thus you can use one amplifier channel to power multiple

speakers.

Make certain that the wires you are using are at least 12 gauge

unshielded speaker cable (the lower the number, the thicker the wire). Do

not use shielded “instrument” cables.

Hooking speakers up in parallel decreases the overall

impedance, placing a greater load on the amplifier. Check your

amplifier’s specifications to ensure that you are not overloading

the channel.

CAUTION: DO NOT USE MORE THAN ONE JACK AS AN

AMPLIFIER INPUT. DOING SO WILL DAMAGE THE S PEAKER!

Amplifier Requirements

Check the product specifications (page 5) to see the power handling

for your model. There are a couple of considerations to keep in mind when

Produktspezifikationen

Marke:	Pyle
Kategorie:	Lautsprecher
Modell:	PADH1579
Breite:	508 mm
Tiefe:	457 mm
Gewicht:	27670 g
Produktfarbe:	Schwarz
Übertragungstechnik:	Kabelgebunden
Impedanz:	8 Ohm
Höhe:	762 mm
Energiequelle:	Nicht unterstützt
RMS-Leistung:	400 W
Equalizer:	Nein
Typ:	Fußboden-stehende Lautsprecher
Gehäusematerial:	MDF-Platten
Audio Kanäle:	1.0 Kanäle
Anzahl des Antriebs:	1
Frequenzbereich:	40 - 20000 Hz
Woofer:	Ja
Tieftönerdurchmesser (imperial):	15 "
Hochtöner:	Ja
Hochtönerdurchmesser (Imperial):	4 "
Lautsprecherplatzierung:	Flur
Subwoofer-Treiberdurchmesser (imperial):	1 "
Lautsprechergehäuse:	Reflexe
Empfindlichkeit:	98 dB
Lautsprechertyp:	2-Wege
Musik Energie:	800 W
Bass-Reflex:	Ja
Tiefe (imperial):	18 "
Breite (imperial):	20 "
Höhe (imperial):	30 "