Pulsar Y674 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pulsar Y674 (5 Seiten) in der Kategorie betrachten. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
ENGLISH
MECHANICAL WATCHES
Automatic winding
MECHANICAL_E 09.6.18, 2:17 PM1
English
2
English
3
HOW TO START THE MECHANICAL WATCH
CROWN
1Pull out to the first click.
TIME/CALENDAR SETTING FOR MODELS WITH DATE CALENDAR
To initially start your watch, swing it from side to side in a horizontal arc for
about 30 seconds.
* If the watch is worn daily, PULSARs automatic mechanism will wind the
mainspring automatically through normal wrist movement.
* If the watch is used without being wound up sufficiently, gain or loss of the watch
may result. To avoid this, wear the watch for more than 8 hours a day.
TIME SETTING FOR MODELS WITHOUT CALENDAR
CROWN
1Pull out to the second click.
2Turn to set the time.
3Push back in to normal position.
MECHANICAL WATCHES
SCREW DOWN CROWN [for models with screw down crown]
1Turn Crown counterclockwise until you no
longer feel the threads turning.
2Crown can be pulled out.
Unlocking the crown
1Push Crown back in to normal position.
2Turn Crown clockwise while pressing it lightly
until tight.
Locking the crown
* When using the watch in water:
Before using the watch in water, be sure the crown is screwed in completely.
Do not operate the crown when the watch is wet or in water.
HOW TO USE THE WATCH
MECHANICAL_E 09.6.18, 2:17 PM2-3
English
4
English
5
* Turn Crown to advance Hour and Minute hands.
6Turn to set the time.
7Push back in to normal position.
Notes on time setting:
When setting the hands, first set them to a time a few minutes earlier than the
correct time, and then advance them to the exact time.
Notes on calendar setting:
Do not change the day or the date between 9:00 p.m. and 4:00 a.m.
Turn the hands past the 12 o’clock marker to determine whether the watch is set
for the A.M. or P.M. period. If the calendar changes when the hour hand passes
the 12 o’clock marker, the time is set for A.M. If the calendar does not change,
the time is set for P.M.
It is necessary to adjust the date at the end of February and 30-day months.
2Turn to show the previous day’s date.
3Pull out to the second click.
4Turn until the desired date appears.
* Turn Crown to advance Hour and Minute
hands.
5Turn to set the time.
6Push back in to normal position.
TIME/CALENDAR SETTING FOR MODELS WITH DAY AND DATE CALENDAR
CROWN
1Pull out to the first click.
2Turn to show the previous day’s date.
3Turn in the opposite direction to show
the previous day of the week.
4Pull out to the second click.
5Turn until the desired date and day
appears.
10
WED
8
MECHANICAL_E 09.6.18, 2:17 PM4-5


Produktspezifikationen

Marke: Pulsar
Kategorie: betrachten
Modell: Y674

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pulsar Y674 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung betrachten Pulsar

Bedienungsanleitung betrachten

Neueste Bedienungsanleitung für -Kategorien-