Power Dynamics WCS50 Bedienungsanleitung

Power Dynamics Lautsprecher WCS50

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Power Dynamics WCS50 (20 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 47 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/20

WCS Series Ampl. Ceiling Speaker WIFI + BT

Ref. nr.: 952.590, 952.593, 952.596

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V1.6

ENGLISH

Congratulations to the purchase of this Power Dynamics product. Please read this manual thoroughly prior to using the unit in

order to benet fully from all features.

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to

avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the unit, please ask advice from a

specialist. When the unit is switched on for the rst time,

some smell may occur. This is normal and will disappear

after a while.

- The unit contains voltage carrying parts. Therefore, do

NOT open the housing.

- Do not place metal objects or pour liquids into the unit

This may cause electrical shock and malfunction.

- Do not place the unit near heat sources such as

radiators, etc. Do not place the unit on a vibrating

surface. Do not cover the ventilation holes.

- The unit is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the unit from a mains outlet, always

pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualied technician.

- If the unit is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains outlet

and DO NOT switch the unit on. Contact your dealer. Do

NOT connect the unit to a rheostat or dimmer.

- To avoid re and shock hazard, do not expose the unit to

rain and moisture.

- All repairs should be carried out by a qualied technician

only.

- Connect the unit to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10-16A fuse.

- During a thunderstorm or if the unit will not be used for a

longer period of time, unplug it from the mains. The rule

is: Unplug it from the mains when not in use.

- If the unit has not been used for a longer period of time,

condensation may occur. Let the unit reach room

temperature before you switch it on.

- For use in humid rooms or outdoors: refer to the

installation guidelines for safe assembly.

- To prevent accidents in companies, you must follow the

applicable guidelines and follow the instructions.

- Do not repeatedly switch the xture on and o. This

shortens the lifetime.

- Keep the unit out of the reach of children. Do not leave

the unit unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Do not force the controls.

- This unit is with speaker inside which can cause

magnetic eld. Keep this unit at least 60cm away from

computer or TV.

- If this product has a built-in lead-acid rechargeable

battery: Please recharge the battery every 3 months if

you are not going to use the product for a long period of

time. Otherwise, the battery may be permanently

damaged.

- If the battery is damaged, please replace with same

specications battery. And dispose the damaged battery

environment friendly.

- If the unit has fallen, always have it checked by a

qualied technician before you switch the unit on again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the unit with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the unit o prior to unplugging it from the mains

and/or other equipment. Unplug all leads and cables

prior to moving the unit.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains voltage is 220-240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this unit.

- Keep the original packing material so that you can

transport the unit in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should

read and adhere to.

The unit has been certied CE. It is prohibited to make any changes to the unit. They would invalidate the CE certicate and

their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local

authorities or your dealer about the way to proceed. The specications are typical. The actual values can slightly

change from one unit to the other. Specications can changed without prior noticebe .

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid

your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings

contained in this manual. Power Dynamics cannot be held responsible for personal injuries caused by a disrespect of the safety

recommendations and warnings. This is also applicable to all damages in whatever form.

OVERVIEW

1. DC Power connector for t adapter he

2. Speaker output connector for t passive speaker he

3. Infrared receiver and status indicator LED

REMOTE CONTROL

INSTALLATION

1. Drill a hole in the cei ng, big enough to t the speaker (checli k

technical specication sheet for size).

2. Connect the active speaker with the 12VDC adapter.

3. Connect active and passive speaker with speaker cable (+/- ).

4. Insert the speaker in the hole.

5. Tighten each of the adjusti screws rmly. (the locking tabs ng

will swivel into the rear surface).

6. Place the metal grill.

Power ON / OFF

Short press for join t speaker group he

Long press for exit the speaker group

Switch EQ Eect

Volume Up

Volume Down

Play / Pause

Switch UP for the predened channel

Switch Down for the predened channel

Short press for swit to the BT play m ch ode

Long press for switch to the BT pair mode

Short press for connect the speaker to t WIFI he

Long press for restore to the factory settings

Switch between BT and WIFI

Produktspezifikationen

Marke:	Power Dynamics
Kategorie:	Lautsprecher
Modell:	WCS50
WLAN:	Ja
Bluetooth:	Ja
Breite:	217 mm
Tiefe:	217 mm
Gewicht:	3000 g
Empfohlene Nutzung:	Haus
Produktfarbe:	Weiß
Übertragungstechnik:	Kabellos
Impedanz:	8 Ohm
Höhe:	105 mm
Energiequelle:	AC
RMS-Leistung:	100 W
AC Eingangsspannung:	100-240 V
AC Eingangsfrequenz:	50 - 60 Hz
DC input Spannung:	19 V
Fernbedienung enthalten:	Ja
Menge pro Packung:	2 Stück(e)
Audio Kanäle:	- Kanäle
Anzahl des Antriebs:	12
Woofer:	Ja
Tieftönerdurchmesser (imperial):	5.25 "
Hochtönerdurchmesser (Imperial):	1 "
Fernbedienung:	Ja
Lautsprecherplatzierung:	in-Wand/in-Decke
Anzahl der Hochtöner-Antriebe:	1
Anzahl der Tieftöner-Antriebe:	1
Hochtönerdurchmesser:	25.4 mm
Empfindlichkeit:	88 dB
Lautsprechertyp:	2-Wege
AirPlay:	Ja
Tieftönerdurchmesser:	133.35 mm
Satelliten Effektivwert Energie:	50 W
Anzahl der Satelliten:	2
Treiberdurchmesser Mitteltöner:	133.35 mm
Satellite Lautsprecher type:	2-Wege
Satellitenlautsprecherfrequenzbereich:	70 - 20000 Hz
Satellitenlautsprecher Widerstand:	8 Ohm
Hochtönerdurchmesser Satellitenlautsprecher:	25.4 "
Tieftönerdurchmesser Satellitenlautsprecher (imperial):	133.35 "
Anzahl Satellitenlautsprecher Hochtöner:	2
Satellitenlautsprecher Empfindlichkeit:	88 dB
Treiberdurchmesser Mitteltöner (imperial):	5.25 "
Lautsprechermembranmaterial:	Kevlar
Satellite Lautsprecher Wandmontage:	Ja