Power Dynamics PD800 Bedienungsanleitung

Power Dynamics Mikrofon PD800

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Power Dynamics PD800 (8 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war fĂŒr 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/8
PD800 In-Ear monitoring System UHF
Ref. nr.: 179.001
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSƁUGI
V2 .0
2
ENGLISH
Congratulations to the purchase of this Power Dynamics oduct. Please read this manual thoroughly prior to using the unit in pr
order to benet fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to
avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the unit, please ask advice from a
specialist. When the unit is switched on for the rst time,
some smell may occur. This is normal and will disappear
after a while.
- The unit contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the unit
This may cause electrical shock and malfunction.
- Do not place the unit near heat sources such as
radiators, etc. Do not place the unit on a vibrating
surface. Do not cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the unit from a mains outlet, always
pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they
need to be replaced by a qualied technician.
- If the unit is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the unit on. Contact your dealer.
- To avoid re and shock hazard, do not expose the unit to
rain and moisture.
- All repairs should be carried out by a qualied technician
only.
- Connect the unit to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the unit will not be used for a
longer period of time, unplug it from the mains. The rule
is: Unplug it from the mains when not in use.
- If the unit has not been used for a longer period of time,
condensation may occur. Let the unit reach room
temperature before you switch it on.
- Never use the unit in humid rooms or outdoors.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Do not repeatedly switch the xture on and o. This
shortens the life time.
- Keep the unit out of the reach of children. Do not leave
the unit unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Do not force the controls.
- This unit is with speaker inside which can cause
magnetic eld. Keep this unit at least 60cm away from
computer or TV.
- If this product have a built-in lead-acid rechargeable
battery. Please recharge the battery every 3 months if
you are not going to use the product for a long period of
time. Otherwise the battery may be permanently
damaged.
- If the battery is damaged please replace with same
specications battery. And dispose the damaged battery
environment friendly.
- If the unit has fallen, always have it checked by a
qualied technician before you switch the unit on again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the unit with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the unit o prior to unplugging it from the mains
and/or other equipment. Unplug all leads and cables
prior to moving the unit.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this unit.
- Keep the original packing material so that you can
transport the unit in safe conditions.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
The unit has been certied CE. It is prohibited to make any changes to the unit. They would invalidate the CE certicate and
their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and
35 95°C/ °F .
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.
Specications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid
your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings
contained in this manual. Power Dynamics cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.
5
Channel adjustment
1. The “CHANNEL SELECT” icon is used to adjust the transmitter frequency channel.
2. In the main menu , press the “SET” button to the “CHANNEL SELECT” icon.
3. When the “CHANNEL SELECT” icon is displayed, press the “UP” button to increase the channel number or “DOWN”
button to decrease the channel number. When the “UP”/“DOWN” button is pressed longer time, the channel number
will be increased / decreased in a fast manner until the button is released.
4. Once the desired frequency channel is reached, press the “SET” button to save and go to the next menu, if have no
any operation in 5 seconds, the receiver will e in xit to the main status. If press the “POWER” button to exit to the ma
status without saving.
Audio Mode adjustment
1. The “MODE SELECT” icon is used to adjust the transmitter audio inputs mode.
2. In the main menu, press the “SET” button to the “MODE SELECT” icon.
3. When the “MODE SELECT” icon is displayed, press the “UP” button to select “STEREO” mode and “DOWN” button to
select “MONO” mode.
4. Once the desired frequency group is reached, press the “SET” button to save and go to the next menu, if have no any
operation in 5 seconds, the receiver will exit to the main status. If press the “POWER” button to exit to the main status
without save.
Power Mode Adjustment
1. The “POWER SELECT” icon is used to adjust the transmitter radiated power.
2. In the main menu, pres s the “SET” button to the “POWER SELECT” icon.
3. When the “POWER SELECT” icon is displayed, press the “UP” button to select “H” mode for higher radiant power and
“DOWN” button to select “L” mode for lower radiant power.
4. Once the desired frequency group is re e no any ached, press the “SET” button to save and go to the next menu, if hav
operation in 5 seconds, the receiver will exit to the main status. to the main status If press the “POWER” button to exit
without save.
Lock Adjustment
1. The “LOCK SELECT” icon is used to lock all the transmitter settings.
2. In the main menu, p ress the “SET” button to the “LOCK SELECT” icon.
3. When the “LOCK SELECT” icon is displayed, press the “UP” button to select “LOC OFF” mode and “DOWN” button to K
select “LOC ON” mode.K
4. Once ve and go to the next menu, if have no any the desired frequency group is reached, press the “SET” button to sa
operation in 5 seconds, the receiver will exit to the main status. If press the “POWER” button to exit to the main status
without save.
INSERT BATTERIES IN THE RECEIVER
Insert two 1.5V AA batteries to control the receiver. Open the receiver's front cover and insert the batteries as shown in the
battery compartment. The display shows the capacity of the batteries: When the battery indicator ashes, the batteries are
empty and the receiver will automatically switch o shortly after. If the receiver is not used for a long period (approx. 1-2 weeks),
remove the batteries to protect the device from possible leakage.

Produktspezifikationen

Marke: Power Dynamics
Kategorie: Mikrofon
Modell: PD800

Brauchst du Hilfe?

Wenn Sie Hilfe mit Power Dynamics PD800 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Mikrofon Power Dynamics

Power Dynamics

Power Dynamics PD524 Bedienungsanleitung

15 Oktober 2024
Power Dynamics

Power Dynamics PD810 Bedienungsanleitung

28 August 2024
Power Dynamics

Power Dynamics 179.193 - PD781 Bedienungsanleitung

25 August 2024
Power Dynamics

Power Dynamics 179.196 - PD782 Bedienungsanleitung

23 August 2024
Power Dynamics

Power Dynamics 173.530 PCM100 Bedienungsanleitung

22 August 2024
Power Dynamics

Power Dynamics 179.010 PD632 Series Bedienungsanleitung

21 August 2024
Power Dynamics

Power Dynamics TG40T Bedienungsanleitung

21 August 2024
Power Dynamics

Power Dynamics PDM57 Bedienungsanleitung

21 August 2024
Power Dynamics

Power Dynamics 173.420 - TM370 Bedienungsanleitung

17 August 2024
Power Dynamics

Power Dynamics 179.012 PD632 Series Bedienungsanleitung

14 August 2024

Bedienungsanleitung Mikrofon

Neueste Bedienungsanleitung fĂŒr -Kategorien-

AKG

AKG WMS420 Bedienungsanleitung

13 Oktober 2024
Sennheiser

Sennheiser ew 100 G4-845-S Bedienungsanleitung

13 Oktober 2024
Audio-Technica

Audio-Technica BP892xCH Bedienungsanleitung

12 Oktober 2024
Sennheiser

Sennheiser SKM 300-835 G3-G Bedienungsanleitung

9 Oktober 2024
Sennheiser

Sennheiser SKM 500 G4 Bedienungsanleitung

9 Oktober 2024
Audio-Technica

Audio-Technica ATM610a Bedienungsanleitung

8 Oktober 2024
Omnitronic

Omnitronic AAB-10 Bedienungsanleitung

8 Oktober 2024
AKG

AKG CBL201B Bedienungsanleitung

8 Oktober 2024
Audio-Technica

Audio-Technica BP894x Bedienungsanleitung

7 Oktober 2024
Azden

Azden SGM-250CX Bedienungsanleitung

6 Oktober 2024