Posiflex CR-4005 Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Posiflex CR-4005 (8 Seiten) in der Kategorie Kassa. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/8
1
Rev. : C
NOTICE
The manufacturer of the POS cash drawer makes no representation or warranties, either
expressed or implied, by or with respect to anything in this manual, and shall not be liable
for any implied warranties of fitness for a particular purpose or for any indirect, special or
consequential damages. Information in this document is subject to change without notice
and does not represent a commitment on the part of the manufacturer.
FCC NOTICE
This equipment generates, uses, and can radiate radio frequency energy and if not installed
and used in accordance with the instructions manual, may cause interference to radio
communications. It has been tested and found to comply with the limits for a Class A digital
device pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide
reasonable protection against interference when operated in a commercial environment.
Operation of this equipment in a residential area is likely to cause interference in which case
the user at his own expense will be required to take whatever measures may be required to
correct the interference.
CR-4000 SERIES
CASH DRAWER
USER’S MANUAL
P/N: 19240901021
2
MODEL NUMBERS
Model CR400X CR410X CR421X
Bill Compartment 5 Adjustable 5 Fixed 5 Fixed
Bill clip Plastic Metal Metal
Coin compartment 9 Fixed 9 Fixed 5 Fixed
Coin Roll storage 1Underneath Cash Tray 4 Behind Cash Tray
INFERFACE APPLICATION
Model Number Interface Security
Code Power / Source
CR-4000/4100/4210 Printer drive N. A. 12/24 V Pulse / Printer
CR-4001/4101/4211 Dedicated RS232 serial N. A.
CR-4002/4102/4212 Non-dedicated RS232 serial 0 ~ 255
CR-4003/4103/4213 Parallel 0 ~ 255
12VAC / Adaptor
CR-4004/4104/4214 Dedicated RS232 serial N. A. 12VDC / PC
CR-4005/4105/4215 USB USB PID 12VAC / Adaptor
CR-4005-II/4105-II/4215-II USB USB PID 12VAC / Adaptor
CARTON CONTENTS
1. Cash drawer pre-assembled.
2. User’s manual.
3. Separators of bill compartment: 4 pcs (for CR4000~5 and CR4005-II only).
4. Key 2pcs: There is a key serial No. sticker on the cash drawer bottom plate. If user lost
the key he/she can order the key according to this number.
5. Signal Cable depend on model
a). For CR4000/4100/4210: The standard signal cable is CCBLA-180 (or CCBLA-180-1)
which has a 8 pin plug at one end to connect to the cash drawer and a 6 pin plug at the
other end to connect to the POS system/printer. This cable serves for most popularly
used POS equipment such as all Posiflex POS terminals, all Posiflex POS printers,
most. Epson POS printers, most Star POS printers and all other compatibles. The user
may cut the 6 pin end or order the ready cut cable CCBLA-180A and assemble this
free end according to his POS printer specification if the POS printer used applies
different connection. The cable connection on. CCBLA-180A is as below:
Wire color RJ45 Function
Red Pin 1 Drawer open sense
Blue Pin 2 Drawer open sense return
Green Pin 7 + 24V to solenoid
Yellow Pin 8 Drawer kick pulse
3
b). For CR4001/ 4101/ 4211/ 4002/ 4102/ 4212: CCBLA-196A with one 9PM and one
9PF connector.
c). For CR4003/ 4103/ 4213: CCBLA-089-1 with one 25PM and one 25PF connector.
d). For CR4004/ 4104/ 4214: The serial signal cable is already built on.
e). For CR4005/ 4105/ 4215/ CR4005-II/ 4105-II/ 4215-II: USB cable is already built on.
6. Power Source depend on model
a). For CR-4000/ 4100/ 4210: not applicable
b). For CR-4001/ 4101/ 4211/ 4002/ 4102/ 4212/ 4003/ 4103/ 4213/ 4005/ 4105/ 4215 /
CR4005-II / 4105 -II/ 4215-II: Power adapter 12VAC 1.5A
c). For CR4004/ 4104/ 4214: Power connector cable and I/O bracket plate.
INSTALLATION
CR4000 / 4100 / 4210 Connect the drawer to POS system/printer as shown below:
CR4001 / 4101 / 4211
1). Connect the drawer serial I/P port to the computer COM port. Connect the power
adapter output to the Power Input jack
2). No other RS232C devices should be connected to the serial O/P port.
3). Set position 3 of S2 to OFF and position 4 of S2 to ON. Please refer to rear panel
illustration.
CR4002 / 4102 / 4212
1). Connect the drawer serial I/P port to the computer COM port. Connect the power
adapter output to the Power Input jack.
2). Other RS232C device can be connected to the serial O/P port when needed as long as
the security code makes no influence to this RS232C device.
3). Set position 3 of S2 to ON and position 4 of S2 to OFF. Set S1 for security code to open
cash drawer. In normal practice, the security code is suggested to be a non-displayable
ASCII character, for example, a hexadecimal number between 01 to 1F. Please refer to
rear panel illustration below.
CR4003 / 4103 / 4213
1). Connect the drawer parallel I/P port to the computer LPT port. Connect the power
adapter output to the Power Input jack.
2). Other parallel device such as a printer can be connected to the parallel O/P port when
needed as long as the Security code makes no influence to this parallel device.
CASH DRAWER
With Printer Interface
8P Telephone Jack
8P Telephone Plug
6P Telephone Plug
Output to drawer
POS System or Printer
Ground
Rear View
Control signal input
Produktspezifikationen
| Marke: | Posiflex |
| Kategorie: | Kassa |
| Modell: | CR-4005 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Posiflex CR-4005 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Kassa Posiflex
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
Bedienungsanleitung Kassa
- Kassa HP
- Kassa Miele
- Kassa Sharp
- Kassa Olympia
- Kassa Casio
- Kassa Olivetti
- Kassa ELO
- Kassa VeriFone
- Kassa SAM4s
- Kassa Vectron
- Kassa Newland
- Kassa ATen
- Kassa Advantech
- Kassa Crestron
- Kassa Barska
- Kassa EC Line
- Kassa Cambro
- Kassa Acropaq
- Kassa Custom
Neueste Bedienungsanleitung für -Kategorien-
15 September 2024
9 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024