PolyJohn PJG3-1001 Bedienungsanleitung

PolyJohn Toilette PJG3-1001

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für PolyJohn PJG3-1001 (4 Seiten) in der Kategorie Toilette. Dieser Bedienungsanleitung war für 26 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
PS02-1000 - July 2014
Page 1 of 4
PS02-1000
Hand Wash Stand
Technical Information
POLYJOHN
USA
PolyJohn Enterprises Corp
2500 Gaspar Ave.
Whiting, IN 46394
Phone: 800-292-1305
Fax: 219-659-0625
www.polyjohn.com
info@polyjohn.com
POLYJOHN
WORLDWIDE
PolyJohn (UK) Ltd.
Equinox 1 Audby Lane
Wetherby, England LS22 7RD
Phone: 44 (0) 1937-583333
Fax: 44 (0) 1937-583322
sales@polyjohn.co.uk
POLYJOHN
CANADA
PolyJohn Canada
P.O. Box 2300
99 Forest Plain Rd.
Orillia, Ontario LV3 6S2
Phone: 800-465-9590
Fax: 705-325-8250
info@polyjohncanada.ca
We recommend reading through the entire information booklet prior to proceeding
with installation, service and maintenance. All references to left and right throughout
the booklet are as viewed from the front of the restroom.
Height 41 in. 104 cm.
Width 18 in. 46 cm.
Depth 9 in. 23 cm.
Tank Capacity 16 gal. 61 ltr.
Pump Capacity
(per stroke) 2  . oz 59.14 ml
Number of Single
Dispenses 1024 1024
Weight Empty 16 lb. 7.2 kg.
Weight Full 150 lb. 68 kg.
SPECIFICATIONS
Dimension Imperial Metric
All materials, including resin, pigments and additives
used to make the plastic components as well as the
plumbing components that come in contact with the
fresh water are U.S. FDA food grade compliant.
PS02-1000 - July 2014
Page 2 of 4
PC-00058 G - Sink ap1 T
(2) PC-000 07 - 1 Rivet
(2) PC-000 06 - Washer 1
PC-000554 - P ug 1" Fill l
PC-000345 - 1” O-Ring
PC- 000339
E bow 3 8l / " Tube x 3 8 / " Npt
PS02-0001
Sink ank T
C 38-0425 - ubingT T
3 8 x 42- 2 Long/ " O.D. 1/ "
PC-000325 - Straight
Barb 1" Npt / "x 3 4
PC-00035 - 01 #1
Hose C amp l
CH075-037 - 3 4 / "
Drain " Hose 37 Long
PC-00055 - 2 Drain P ug1 1/ " l
PC-000346 - 2 O-Ring 1/
PC-0004 51
Rubber UniSea l
C 38-003T
3 8/ " Tubing x 3 Long "
PS02-0003 - Foot Pump P late
(2) PC-000 47 - S 1 crew
PC-000600 - Baby Foot Pump
(4) PC-000 02 - Sma F 1 Rivet ll lange
(4) PC-000 06 - Washer 1
** T NO SHOWN
PC-000782 - a Not or Cooking Dec l for Drinking
cPC-000783 - De al Transport
c l PC-000790 - De a Foot Pump
General Product Information
This self-contained hand wash sink is designed for installation in the PJ03 Series
portable restroom. It will t in many other similar types of portable restrooms
including the PJN3 Series restroom. It is supplied fully assembled including
all fasteners for installation and will t on either sidewall. One person will be
required for installation with the exception of some assistance to hold the back-
up washers when riveting the sink to a sidewall.
Parts Drawing - Exploded View
PS02-1000 - July 2014
Page 3 of 4
(2) PC-000107 - Rivet
(2) PC-000158 -
Self-Tapping Screw(4) PC-000106 -Washer (2) PC-000123 - Washer
Full Size Scale Fasteners
~~Tools Required for Installation~~
Tape measure • 1-1/8” hole saw • 3/8” Hex-key wrench
• 5/8” Hex-key wrench • Drill with 13/64” bit • Rivet Gun
• Phillips, cross-head screwdriver
Before installing the sink, a 1-1/ ”8 drain hole that will accept the drain hose must
be cut in the waste tank. This hole should be located on the top left or right front
edge of the waste tank approximately 16 up from the base skid.
Place the sink at against the sidewall, making sure the drain hose is routed
through one of the moulded-in channels along the back. There are two square
recesses to the left and right of the water spigot, to attach the sink to the sidewall
drill a 13/ ”64 hole into the center of both the square recesses. Fasten to the
sidewall from the interior by putting a PC-000106 washer at the head of a PC-
000107 rivet and have someone hold a PC-000123 and a PC-000106 washer on
the rivet stem on the exterior.
Attach sink to base skid; Drive two PC-000158 self-tapping screws in the
predrilled holes in the sink mounting plate.
Installation of Sink
IMPORTANT DECALS
NOT FOR COOKING OR DRINKING , required by law in certain areas of the U.S. Other
geographical areas require that the materials used to manufacture the sinks comply
with the U.S. Federal Food and Drug Administration (FDA) guidelines 21 CFR 175.300
(resins), 177.1520 (ole n polymers) and 178.3297 (colorants for polymers). The materi-
als also comply with the U.S. Public Health Service Drinking Water Standards, 42 CFR
part 72 and U.S. Environmental Protection Agency Interim Primary Drinking Water Reg-
ulations 40 CFR part 141.
HANDS FREE SINK, instruction for user to use foot pump to operate the sink.
UNIT MUST BE DRAINED BEFORE TRANSPORTING, reminds service operator to
empty the sink before transporting.


Produktspezifikationen

Marke: PolyJohn
Kategorie: Toilette
Modell: PJG3-1001

Brauchst du Hilfe?

Wenn Sie Hilfe mit PolyJohn PJG3-1001 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Toilette PolyJohn

Bedienungsanleitung Toilette

Neueste Bedienungsanleitung für -Kategorien-