Polk Reserve R200 Bedienungsanleitung

Polk Lautsprecher Reserve R200

Lesen Sie kostenlos die šŸ“– deutsche Bedienungsanleitung fĆ¼r Polk Reserve R200 (71 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war fĆ¼r 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/71
R500, R600 & R700 Floor-standing Loudspeakers
R300, R350 & R400 Center Channel Speakers
R100 & R200 Bookshelf Speakers
Reserveā„¢
R500, R600 & R700 Haut-parleurs sur pied
R300, R350 & R400 Enceintes centrales
R100 & R200 Enceintes dā€™Ć©tagĆØre
OWNERā€™S MANUAL
2
English
WARNING: Listen Carefully
Polk Audio loudspeakers are capable of playing at extremely
high volume levels, which could cause serious or permanent
hearing damage. Polk Audio, Inc. accepts no liability for
hearing loss, bodily injury, or property damage resulting from
the misuse of its products. Keep these guidelines in mind and
always use good judgment when controlling volume:
ā€¢ Limit prolonged exposure to volume levels that exceed
85 decibels (dB). For more information about safe volume
levels, take a look at the Occupational Health
and Safety Administration (OSHA) guidelines at
http://www.osha.gov/.
Product Disposal
Certain international, national and/or local laws and/or
regulations may apply regarding the disposal of this product.
For more information, please contact the retailer where you
purchased this product or the Polk importer/distributor in your
country. More information is also available at
www.polkaudio.com.
Expect Great Soundā€”The Polk Reserve Story
Thank you for purchasing the Polk Reserve Series loudspeakers!
Modern styling combined with Polkā€™s premium Pinnacle tweeter
and Turbine mid-range driver deliver high-resolution detail
and imaging. With our detailed, deep eī˜Ÿortless bass, you will
enjoy a whole new listening experience. Pure and minimalist,
the Polk Reserve Series is engineered and designed with your
entertainment in mind.
Having built our reputation as ā€œThe Speaker Specialistsā€ for
more than 45 years, we take pride in our superior sound
and build quality, which features many patented and award-
winning audio innovations. For the people of Polk, building
audio products is not just a jobā€”itā€™s a passion. And if youā€™re
going to remember one thing, remember this: We live by the
truest principle of what audio should deliverā€”great sound at an
aī˜Ÿordable price for everyone!
Technical Assistance or Service
Thank you for your PolkĀ® purchase! If you have a question or
comment, please feel free to contact us. Please visit
www.polkaudio.com for support contact information.
Contents
Expect Great Sound ā€” The Polk Reserve Story 2 .............................
Safety Instructions 3 ........................................................................................
Whatā€™s in the Box .............................................................................................4
How to Connect Your System ....................................................................4
Caring for Your Reserve Loudspeakers ................................................5
Reserve Series Speaker Positioning .......................................................6
Speciļ¬cations 11 ....................................................................................................
4
English
Connectors
You have several options when choosing connectors for your
speaker wires, and itā€™s really a matter of personal preference.
Three of the more commonly used are banana plugs, spade
lugs and bare wire. If you know where you want to locate your
speakers and plan to set up your system and leave them there,
then bare wire will work ļ¬ne. Just make sure there are not
stray strands of wire that could come into contact. If you like
to experiment with diī˜Ÿerent speaker locations, spade lugs or
banana plugs oī˜Ÿer more convenient options when it comes to
disconnecting and reconnecting wires.
Basic Floor-Standing, Center, Bookshelf, and Height Module
Speaker Hookup
Make sure that the red (+) and black (-) connectors on your
ampliļ¬er or receiver connect to the red (+) and black (-) connectors
on your speakers. If your speakers sound ā€œthin,ā€ with little bass and
little or no center image, odds are that one of the speaker wires is
connected backwards. Double check all connections.
Bi-Wiring (R700 only)
Bi-wiring can provide noticeable improvements in the overall
transparency of your loudspeakers. After removing the jumpers,
run separate speaker wires to the low and high frequency
drivers from a single ampliļ¬er (the upper set of binding posts
are for the high frequency drivers, the lower set of binding
posts are for the low frequency drivers). Connect one set of
speaker wires to the upper terminals on each speaker and one
set of wires to the lower terminals. Connect the other ends of
both wire sets to the same ampliļ¬er outputs. See ampliļ¬er/AV
receiver user manual for conļ¬guration instructions (Figure 1).
Whatā€™s in the Box
Each box contains:
1. Loudspeaker(s)
2. Ownerā€™s Manual
3. Registration Card
4. Magnetic grilles
(Speaker cable not included)
How to Connect Your System
To get the best sound quality, itā€™s important to wire your
speakers correctly.
Wire Preparation
Follow the hookup directions included with your receiver/
ampliļ¬er. Strip 0.5ā€ (12.7mm) of insulation from each of the
two conductors of the wire to expose the bare metal and twist
each of the individual conductors into single un-frayed strands.
Note that one of the terminals on the rear of each speaker is
marked red (+) and the other is black (ā€“). Make sure that you
connect the wire from the positive (+) terminal of your ampliļ¬er
or receiver to the red (+) terminal on your speaker and the wire
from the negative (ā€“) terminal of your ampliļ¬er or receiver to
the black (ā€“) terminal on your speaker. Most wire has some
indicator (such as color-coding, ribbing or writing) on one of
the two conductors to help you maintain consistency.
These recommendations are for all connections from the
ampliļ¬er/receiver to each speaker:
Binding Posts
To connect wire to the binding post, unscrew the binding post
cap and insert the bare wire into the hole near the base of the
binding post. Do not insert the insulated part of the wire into
the hole as this will not give you a good connection. Tighten the
binding post cap until it seats ļ¬rmly with the wire, but do not
over tighten.
Runs Minimum Wire Gauge
Lengths up to 25' (5 m) 16
Lengths greater than 25' (5 m)
but less than 50' (15 m)
14
Lengths greater than 50' (15 m)
but less than 75' (25 m)
12
Lengths greater than 75' (25 m) 10
(Figure 1)
RIGHT FRONT

Produktspezifikationen

Marke: Polk
Kategorie: Lautsprecher
Modell: Reserve R200

Brauchst du Hilfe?

Wenn Sie Hilfe mit Polk Reserve R200 benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Lautsprecher Polk

Polk

Polk S-15 Bedienungsanleitung

8 Oktober 2024
Polk

Polk 255C-RT Bedienungsanleitung

19 September 2024
Polk

Polk 265-LS Bedienungsanleitung

17 September 2024
Polk

Polk N1 Bedienungsanleitung

15 September 2024
Polk

Polk Signature Elite Bedienungsanleitung

14 September 2024
Polk

Polk Reserve R400 Bedienungsanleitung

11 September 2024
Polk

Polk Signature Elite ES90 Bedienungsanleitung

6 September 2024
Polk

Polk Signature S20 Bedienungsanleitung

3 September 2024
Polk

Polk Signature Elite ES15 Bedienungsanleitung

2 September 2024
Polk

Polk Legend L100 Bedienungsanleitung

30 August 2024

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung fĆ¼r -Kategorien-

Sonance

Sonance Visual Performance VP65 SST Bedienungsanleitung

16 Oktober 2024
Bowers And Wilkins

Bowers And Wilkins CWM664 Bedienungsanleitung

16 Oktober 2024
Focal

Focal Chorus 826 V Bedienungsanleitung

16 Oktober 2024
KEF

KEF Ci200ER Bedienungsanleitung

16 Oktober 2024
Steren

Steren SPK-1100BL Bedienungsanleitung

16 Oktober 2024
Aiwa

Aiwa SP-A100 Bedienungsanleitung

16 Oktober 2024
Trust

Trust GXT 628 Bedienungsanleitung

15 Oktober 2024
Pyle

Pyle PBMSPG6 Bedienungsanleitung

15 Oktober 2024
Marshall

Marshall Tufton Bedienungsanleitung

15 Oktober 2024
Sunstech

Sunstech SPUBT780 Bedienungsanleitung

15 Oktober 2024