Polk 80F/X-RT Bedienungsanleitung

Polk Lautsprecher 80F/X-RT

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Polk 80F/X-RT (10 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/10

LS Model

80F/X®-LS

RT Models

80F/X®-RT

620-RT

2 Polk Audio Customer Service: 1-800-377-7655 (Outside US & Canada: 410-358-3600) Monday-Friday, 9:00 AM-6:00 PM EST, polkcs@polkaudio.com

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

READ BEFORE OPERATING EQUIPMENT

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings.

Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources

such as radiators, heat registers, stoves,

or other apparatus (including amplifiers)

that produce heat.

9. Refer all servicing to qualified service

personnel. Servicing is required when the

apparatus has been damaged in any way,

liquid has been spilled or objects have fallen

into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate

normally, or has been dropped.

10. WARNING: To reduce the risk of fire or

electric shock, this apparatus should not be

exposed to rain or moisture and objects filled

with liquids, such as vases, should not be

placed on this apparatus.

Product Disposal—Certain interna-

tional, national and/or local laws and/

or regulations may apply regarding

the disposal of this product. For further

detailed information, please contact

the retailer where you purchased this

product or the Polk Audio Importer/

Distributor in your country. A listing of Polk Audio

Importer/Distributors can be found on the Polk Audio

website www.polkaudio.com or by contacting

Polk Audio at 5601 Metro Drive, Baltimore,

Maryland 21215, USA—Phone: +1 410 358-3600.

WARNING: Listen Carefully

Polk Audio loudspeakers and subwoofers are

capable of playing at extremely high volume levels,

which could cause serious or permanent hearing

damage. Polk Audio, Inc. accepts no liability for

hearing loss, bodily injury or property damage

resulting from the misuse of its products.

Keep these guidelines in mind and always use

your own good judgment when controlling volume:

Ê UÊÊ 9ÕÊÃÕ`ÊÌÊ«À}i`ÊiÝ«ÃÕÀiÊÌÊ

volumes that exceed 85 decibels(dB).

For more about safe volume levels, go to the

Occupational Health and Safety Administration

(OSHA) guidelines at http://www.osha.gov/dts/

osta/otm/noise/standards_more.html

TAKE INVENTORY

Inside each speaker container, you should

find the following:

1. One in-ceiling loudspeaker or one set

of loudspeakers for F/X® models only.

2. Speaker cutout mounting template

3. One Sheer-Grille (for each speaker)

4. One Owner’s Manual

5. Registration Card

Important Note: If anything is missing or

damaged, or if your speaker fails to operate,

notify Polk Audio Customer Support Services

immediately at 800-377-7655.

INSTALLATION RECOMMENDATION

FOR OPTIMUM PERFORMANCE

Important Note: Vanishing Series Loudspeakers

are not magnetically shielded and should not be

placed closer than 1' (30cm) from a CRT (tube)

television or video monitor.

Important Note:Ê9ÕÊÃÕ`Ê>ÛiÊ>ÊÌÀÕ}Ê

understanding of and adhere to all local building

and fire codes. Also, you should be familiar with

the area behind the wall or ceiling into which

you plan to install your speakers. Always use

wire that meets appropriate building and fire

codes. (Note: Wiring is best performed

by an experienced professional.)

When installing your loudspeakers, be aware of

the weight of your particular model and the sturdi-

ness of the material into which you are installing

the speaker. Be aware of any concealed studs,

electrical wiring or plumbing in the wall or ceiling

into which you are installing the speakers.

If you doubt that you possess the necessary

skills or tools, consult your Polk Audio dealer

or a professional installer.

WIRE RECOMMENDATIONS

(minimum recommended)

Runs Gauge

Lengths up to 25' 18 or 16

Lengths greater than 25' 16 or 14

but less than 50'

Lengths greater than 50' 14 or 12

but less than 75'

Lengths greater than 75' 12

LOUDSPEAKER INSTALLATION

You will need:

Ê UÊÊ *iVÊvÀÊ>À}ÊÌiÊV>ÌÊvÊÃÌ>>Ì°

Ê UÊÊ iÞiÊÃ>Ü]ÊÕÌÌÞÊviÊÀÊ>ÌiÀ>

appropriate tool for cutting drywall

or other wall material.

Ê UÊÊ -VÀiÜ`ÀÛiÀ]Ê«ÀiviÀ>LÞÊ«ÜiÀi`]Ê

with Phillips Head bit.

Ê UÊÊ *ÜiÀÊ`ÀÊÜÌÊ>««À«À>ÌiÊLÌÊ

(optional, for starting wall cut).

Trace around the template.

Cut the hole with the appropriate tool.

IMPORTANT INFORMATION BEFORE

YOU INSTALL YOUR LOUDSPEAKERS

Wall Or Ceiling Surface Preparation

If you’re installing your Vanishing Series speaker

into a heavily textured wall or ceiling (e.g. stucco

or popcorn finish), you must prepare the wall

surface immediately around the speaker

cutout. Sanding and smoothing the wall or

ceiling surface will ensure the speaker and

grille both seat properly and flat to the surface.

For more information visit our website at www.polkaudio.com 3

IMPORTANT INFORMATION SHOULD

YOU CHOOSE TO PAINT YOUR GRILLES

Because of its ultra-thin profile, the Vanishing

Series Sheer-Grille™ requires a specific painting

procedure to ensure smooth, even coverage.

The grille scrim and perforated grille come

assembled and require no disassembly.

Paint Recommendation

We highly recommend you use a can of spray

paint matched to the ceiling color you want the

Sheer-Grilles to blend with.

Important Note: Never use a brush or roller to

paint the grilles, as this will clog the perf holes.

To paint the Sheer-Grille

1. Elevate the Sheer-Grille off of a flat surface.

This will ensure even coverage of the grille

frame and make it easier to pick up.

Mounting Idea: A single spray can cap

will raise the grille high enough.

2. Hold the spray paint about 12" from

the grille and at a 45° angle.

3. Apply one light, thin coat, moving evenly

side to side over the grille, then work your

way around the perimeter of the grille

to ensure you cover the grille frame.

4. After each application of paint, wait

approximately 1 minute, rotate the

grille 90°, and apply the next thin coat.

Important Note:Ê9ÕÊÕÃÌÊÀÌ>ÌiÊÌiÊ}ÀiÊ

90°. Use your hands to define the next 90°

rotation and always rotate the grille in the

same direction of travel.

5. Three light, even applications should cover

the grille and frame adequately. Remember

to work your way around the grille frame

to cover it evenly and completely.

SURROUND SPEAKER PLACEMENT

Polk Audio F/X® surround loudspeakers give you

nearly endless placement options. But remember

that where you place your surround speakers

requires some careful thought, as installation

requires that you cut a hole in your wall or ceiling.

Diagram shows speaker locations for

5.1 and 7.1 systems, when two additional

in-ceiling speakers are installed at back

of the room.

Left/Right Orientation: F/X® surround loud-

speakers have a left/right orientation, and each

speaker is clearly marked on the serial number

label on the back of the magnet for installation

on either the right or left. Right and left are

defined from your listening area as you face

your system’s center channel.

Please Note: For more on speaker placement go

to: www.polkaudio.com/education/article.php?id=15

or www.polkaudio.com/downloads/hthandbook.pdf

ROOM ENVIRONMENT CONTROLS

Imaging (80F X/ -LS only)

F/X Surround Loudspeakers offer switchable

“Diffuse” and “Solid” imaging patterns

to create the surround effect you desire.

A “Diffuse” image is defined as one which

creates a “cloud” of sound; think of the effect

as ambient sounds which fill the environment

all around you, but are less localizable.

A “Solid” image is one which creates a more pin-

point sound; sound is more localized. The location

of sounds in the sound field is more identifiable.

Wall Distance Switch (F/X models only)

In-ceiling loudspeakers excel when placed

more than 2' (60cm) from side walls. If position

limitations demand that in-ceiling loudspeakers

be installed closer than 2' (60cm) from side walls,

the proximity of the surface can result in a response

“bump” between 50 and 200Hz. This can cause

in-ceiling speakers to sound “boomy.” The

“Wall Distance” switch flattens response

and eliminates “boominess” without sacrificing

deep bass response, for more lifelike sound.

Solid / Diffuse

Imaging

Produktspezifikationen

Marke:	Polk
Kategorie:	Lautsprecher
Modell:	80F/X-RT

Brauchst du Hilfe?

Wenn Sie Hilfe mit Polk 80F/X-RT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Lautsprecher Polk

Polk S-15 Bedienungsanleitung

8 Oktober 2024

Polk 255C-RT Bedienungsanleitung

19 September 2024

Polk 265-LS Bedienungsanleitung

17 September 2024

Polk N1 Bedienungsanleitung

15 September 2024

Polk Signature Elite Bedienungsanleitung

14 September 2024

Polk Reserve R400 Bedienungsanleitung

11 September 2024

Polk Signature Elite ES90 Bedienungsanleitung

6 September 2024

Polk Signature S20 Bedienungsanleitung

3 September 2024

Polk Signature Elite ES15 Bedienungsanleitung

2 September 2024

Polk Legend L100 Bedienungsanleitung

30 August 2024

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-

Sonance Visual Performance VP65 SST Bedienungsanleitung

16 Oktober 2024

Bowers And Wilkins CWM664 Bedienungsanleitung

16 Oktober 2024

Focal Chorus 826 V Bedienungsanleitung

16 Oktober 2024

KEF Ci200ER Bedienungsanleitung

16 Oktober 2024

Steren SPK-1100BL Bedienungsanleitung

16 Oktober 2024

Aiwa SP-A100 Bedienungsanleitung

16 Oktober 2024

Trust GXT 628 Bedienungsanleitung

15 Oktober 2024

Pyle PBMSPG6 Bedienungsanleitung

15 Oktober 2024

Marshall Tufton Bedienungsanleitung

15 Oktober 2024

Sunstech SPUBT780 Bedienungsanleitung

15 Oktober 2024