Planet POE-E201 Bedienungsanleitung

Planet WLAN-Repeater POE-E201

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Planet POE-E201 (10 Seiten) in der Kategorie WLAN-Repeater. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/10

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1.2 Key Features

 IEEE 802.3at / 802.3af Power over Ethernet compliant

 Complies with IEEE 802.3 / 802.3u / 802.3ab

10/100/1000Base-T

 Extends the range of PoE an additional 100 meters

(328ft.)

 Auto-detect and protect of PoE equipment from being

damaged by incorrect installation

 Multiple units, daisy-chain installation support

 Forwards both Ethernet data and PoE power to

remote device

 No external power cable installation required

 Compact size, Wall-mountable design

 Plug-and-Play installation

1. Introduction

1.1 Package Contents

Thank you for purchasing PLANET POE-E201 IEEE

802.3at Power over Gigabit Ethernet Extender, your

Power over Gigabit Ethernet Extender package shall

contains following contents:

Check the contents of your package for following parts:

 IEEE 802.3at Power over Gigabit Ethernet Extender x 1

 User's Manual x 1

If any of these pieces are missing or damaged, please

contact your dealer immediately, if possible, retain the

carton including the original packing material, and use

them against to repack the product in case there is a

need to return it to us for repair.

1.3 TechnicalSpecication

Model POE-E201

Interfaces

LAN IN

1 x 10/100/1000Base-T Ethernet with

IEEE 802.3at / 802.3af PoE “Data

DC”

in Auto MDI/MDI-X, Auto-negotiation

RJ-45 connector

LAN OUT

1 x 10/100/1000Base-T Ethernet with

IEEE 802.3at / 802.3af PoE “Data

DC”

out Auto MDI/MDI-X, Auto-negotiation

RJ-45 connector

Power over Ethernet

PoE Standard IEEE 802.3af Power over Ethernet

IEEE 802.3at High Power over Ethernet

PoE Power Supply

Type Mid-Span / Type B

PoE Power Output 52V DC, 510mA, Max. 26 Watts

Power Pin

Assignment 4/5(+), 7/8(-)

Maximum

Distance

4 units, daisy-chain installation with

500m support

2.2 Ports Connection

IN Port

Connect the PoE IN port from following

802.3at / 802.3af PSE device through a

CAT-5/5e/6 UTP cable:

• PoE Injector

• PoE Injector Hub

• PoE Ethernet Switch

• Previous POE-E201

OUT

Port

Connect the PoE OUT port to following

802.3at / 802.3af device through aPD

CAT-5/5e/6 UTP cable:

• PoE IP Camera • PoE VoIP Phone

• PoE Wireless AP

• PoE Splitter

• Next POE-E201

2.3 LEDDenition:

LED Color Function

PoE IN Green

Lights to indicate the port is

providing 52-56V (802.3at) / 48V

(802.3af) DC in-line power.

LNK/

ACT Green

Lights to indicate the port is link

up.

Blink: indicate that the extender is

actively sending or receiving data

over port.IN

PoE

OUT Green

Lights to indicate the port is

providing 52-56V (802.3at) / 48V

(802.3af) DC in-line power.

Network Cable

10Base-T: 4-Pair UTP Cat. 5 up to 100m

(328ft)

100Base-TX: 4-Pair UTP Cat. 5 up to

100m (328ft)

1000Base-T: 4-Pair UTP Cat. 5e, 6, up to

100m (328ft)

EIA/TIA-568 100-ohm STP (100m, 328ft)

Standards Conformance

Regulation

Compliance FCC Part 15 Class A, CE

Standard

Compliance

IEEE 802.3 10Base-T Ethernet

IEEE 802.3u 100Base-TX Fast Ethernet

IEEE 802.3ab 1000Base-T Gigabit

Ethernet

IEEE 802.3af Power over Ethernet

IEEE 802.3at High Power over Ethernet

IEEE 802.3x Flow Control

Environment

Operating

Temperature: -10 ~ 60 Degree C

Relative Humidity: 5 ~ 95%

(non-condensing)

Storage

Temperature: -40 ~ 85 Degree C

Relative Humidity: 5 ~ 95%

(non-condensing)

Note

Distance will often be shorter due to power

delivery voltage-drop on the wire. The maximum

distances will vary on the quality of the UTP cable

and environment.

Hardware Specication

Data Rate 10/100/1000Mbps

Switch

Architecture Store-and-Forward

Switch

Throughput

10Mbps: 14880pps@64Bytes

100Mbps: 148810pps@64Bytes

1000Mbps: 1488000pps@64Bytes

Maximum Frame

Size 1552Bytes

Flow Control Back pressure for Half-Duplex

IEEE 802.3x Pause Frame for Full-Duplex

LED Indicators

• 1 x PoE IN (Green)

• 1 x LAN Data (Green)

• 1 x PoE OUT (Green)

Protection ESD (Ethernet): 2KV (TBD)

Surge (EFT for power): 2KV (TBD)

Dimension

(W x D x H) 94 x 70 x 26 mm

Weight 197g

Power

Requirement

IEEE 802.3at compliant with voltage

within 52V-56V DC

Power

Consumption 3.2 Watts (system maximum)

Mechanical Metal / Wall Mountable

2. Hardware Description

2.1 Product Outlook

26.50 22.50

3. Hardware Installation

This product provides three different running speeds –

10Mbps, 100Mbps and 1000Mbps in the same device

and automatically distinguishes the speed of incoming

connection.

This section describes the hardware features of

POE-E201. Before connecting any network device to the

POE-E201, read this chapter carefully.

3.1 Before Installation

Before your installation, it is recommended to check

your network environment. If there is any far away

IEEE 802.3at / 802.3af devices need to power on, the

POE-E201 can provide you a way to supply power for

this Ethernet device conveniently and easily.

The POE-E201 is installed between the PSE (Power

Source Equipment) and the PD (Powered Device); it is

remaining PoE power to the PD. The POE-E201 doesn’t

require an external power supply and it can be installed

easily just plug and play; that means the operator does

not need to congure the POE-E201. The POE-E201

injects power to the PDs without affecting the data

transmission performance. It offers a cost effective and

quick solution to extend power and data an additional

100m.

- 9 -

- 10 -

- 11 -

- 12 - - 13 - - 14 -

Note

1. To provide you better PoE power and data

extension quality, we strongly recommend that

you use “Solid UTP Cable” when installing

POE-E201.

2. The POE-E201 can be installed with third-party

device if the device complied with IEEE 802.3at

/ 802.3af standard.

3.2 Connect POE-E201 to the Power Source

Equipment (PSE)

There are 2 RJ-45 ports in the PoE Extender, of which

the port functions as “IN” "PoE (Data and Power)

input" “OUT” and the port on the other side functions

as "PoE (Data and Power) output".

Step 1: Connect a standard Cat.5/5e/6 UTP cable from

Power Source Equipment (PSE), such as

PoE Switch, PoE Injector hub and single port

PoE injector, to the “IN” port of POE-E201.

Step 2: The PSE delivers both Ethernet Data and PoE

power over UTP cable to the POE-E201 and the

“PoE IN” LED will be steady on.

Note

1. The POE IN LED turn on steady green means

POE-E201 is being powered successfully with

PoE class 0.

2. If POE IN LED does not turn on, please check

the remote PSE or the cable with a PC or a

network device to see if the cable is correct. Or

with an IEEE 802.3at / 802.3af device such as

the target PD to check the power injection is

correct either.

3.4 Multiple PoE Extender Installation

The POE-E201 PoE Extender supports multiple units,

daisy-chain installation. They can be employed in

series for even longer distances based on remote

PoE IP Camera or PoE Wireless Access Point power

requirement.

Step 1: Connect the additional Cat.5/5e/6 cable from

the “OUT” port of the rst POE-E201, the

other end of the UTP cable be used to connect

to the port of remote / next POE-E201.“IN”

Step 2: “PoE OUT” The LED indicator of the rst

POE-E201 will be steady to shows it is

providing power to next PoE Extender.

Step 3: “PoE IN” The LED on the next POE-E201 will

steady on.

3.3 Connect POE-E201 to the Powered

Device (PD)

Step 3: Connect the additional Cat.5/5e/6 cable

that will be used to connect to the remote

Powered Device (PD) “OUT” to the port of

POE-E201.

Step 4: "OUT" The port is also the power injectors

which transmit DC Voltage to the Cat.5/5e/6

cable and transfer data and power

simultaneously between the PSE and PD.

Step 5: Once POE-E201 detects the existence of an

IEEE 802.3at / 802.3af device, the “PoE OUT”

LED indicator will be steady, ON to shows it is

providing power.

PoE IP Camera

POE-E201

802.3at

PoE Extender

802.3at

PoE Injector

PoE P oE

100M100M

200M

Power Line (AC)

DC Power Line (DC)

1000Base-T UTP

PoE

1000Base-T UTP with PoE

Note

1. If the connected device is not fully complying

with IEEE 802.3at / 802.3af standard or in-line

power device, the PoE OUT LED indicator of

POE-E201 will not be steady on.

2. According to IEEE 802.3at / 802.3af standard,

the POE-E201 will not inject power to the cable

if not connecting to a standard IEEE 802.3at /

802.3af device.

Step 4: Connect the additional Cat.5/5e/6 cable to the

remote PoE powered device to the “OUT” port

of next or third POE-E201.

POE-E201

802.3at PoE Ethernet

Switch/Injector Hub

UPS

PoE

100M

PoE

100M

Outdoor IR

IP Camera

non-PoE IP Camera

802.3at

PoE Splitter

PoE

100M

PoE

100M

Power Output

300m 200m 100m 0m Distance

400m500m

POE-E201

802.3at

PoE Extender

802.3at

PoE Extender

802.3at

PoE Extender

802.3at

PoE Extender

802.3at

PoE Extender

802.3at

PoE Extender

POE-E201

802.3at

PoE Extender

POE-E201

PoE

100M

POE-E201

PoE

100M

POE-E201

PoE IP Camera

POE-E201

Power Line (AC)

DC Power Line (DC)

1000Base-T UTP

PoE

1000Base-T UTP with PoE

Note

1. Per POE-E201 will take 3.2 Watts maximum for

the system itself, please check the total power

consumption of your IEEE 802.3at / 802.3af

PD and the POE-E201 before you make the

daisy-chain connection. If the overall power

consumption is overloaded, the local PSE could

shutdown the whole power system.

2. Per POE-E201 cable segment is limited in 100

meters Cat.5/5e/6 UTP wire from its IN/OUT

port to the other data end, use of any other

non standard cable or over distance could re-

sults in unstable connection.

3.5 Optional - DIN-Rail Mounting

There are two DIN-Rail holes on the left side of the

POE-E201 that allows the Extender can be easily

installed with DIN-Rail mounting. The PLANET optional

DIN-Rail mounting Kit – RKE-DIN can be order

separately. When need to replace the wall mount

application with DIN-Rail application on the POE-E201,

please refer to following gures to screw the DIN-Rail on

the Extender. To hang the POE-E201, follow the below

steps:

Step 1: screw the DIN-Rail on the POE-E201.

Step 2: Lightly press the button of DIN-Rail into the

track.

Step 3: Check the DIN-Rail is tightly on the track

You must use the screws supplied with the

mounting brackets. Damage caused to the parts

by using incorrect screws would invalidate your

warranty.

Produktspezifikationen

Marke:	Planet
Kategorie:	WLAN-Repeater
Modell:	POE-E201
Breite:	94 mm
Tiefe:	70 mm
Gewicht:	197 g
Produktfarbe:	Blau
Höhe:	26 mm
Befestigungstyp:	Wand
Betriebstemperatur:	0 - 50 °C
Relative Luftfeuchtigkeit in Betrieb:	0 - 95 %
Netzstandard:	IEEE 802.3,IEEE 802.3ab,IEEE 802.3at,IEEE 802.3u,IEEE 802.3x
Zertifizierung:	FCC Part 15 Class A, CE
Stromverbrauch (Standardbetrieb):	3.2 W
Power over Ethernet (PoE):	Ja
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	2
Typ:	Netzwerksender & -empfänger
Gehäusematerial:	Metall
Plug & Play:	Ja
LED-Anzeigen:	LAN,PoE
Temperaturbereich bei Lagerung:	-10 - 85 °C
Luftfeuchtigkeit bei Lagerung:	5 - 95 %
Verkabelungstechnologie:	10/100/1000Base-T(X)
Maximal mögliche Übertragungsstrecke:	100 m
unterstütze Kabeltypen:	Cat5,Cat5e,Cat6
Datenübertragungsrate:	1000 Mbit/s
Auto MDIX IEEE:	Ja
Duplex-System:	Voll