Planet IPOE-165 Bedienungsanleitung

Planet Schalter IPOE-165

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Planet IPOE-165 (2 Seiten) in der Kategorie Schalter. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

- 2 - - 4 - - 6 - - 8 -

- 1 - - 3 - - 5 - - 7 -

1. Package Contents

Thank you for purchasing PLANET Industrial IP67 1-port 10/100/1000T

802.3at PoE+ Injector, IPOE-165. In the following sections, the term

“Outdoor PoE Injector” means the IPOE-165.

Open the box of the Industrial PoE Injector and carefully unpack it. The

box should contain the following items:

IPOE-165 x 1 User's Manual x 1 M22 Waterproof

Cable Gland x 3

Power Cable with 2-pin

Terminal Block x 1 Wall-mounted Kit x 1 Ground Wire x 1

If any of these are missing or damaged, please contact your dealer

immediately; if possible, retain the carton including the original packing

material, and use them again to repack the product in case there is a

need to return it to us for repair.

2.2 Power Input Port

Figure 2-2 shows the Power Input port side of the IPOE-165

Figure 2-2: IPOE-165 Power Input port side

2.3 Data Input Port and 802.3at PoE+ Output Port

Figure 2-3 shows the Data Input Port and PoE+ Output Port side of the

IPOE-165.

PoE+ Output Port Data Input Port

Figure 2-3: IPOE-165 two RJ45 ports side

Caution

Make sure the clamping nut is tightly attached to the

cable gland body and the sealing insert is squeezed

tightly.

Step 5: Repeat Steps 1 to 4 for “Data” Input Port and“PoE (Data +

Power)” Output Port

3. Installation

This section describes how to install the Outdoor PoE Injector and make

connections to it. Please read the following topics and perform the

procedure in the order being presented.

3.1 Installing Cable Gland with Power Cable and RJ45

UTP Cable

The cable gland consists of the following:

3.2 Connecting Waterproof Cable Kit to the Outdoor

PoE Injector

Step 1: Turn clockwise to tighten the connected to the gland body

Outdoor PoE Injector.

2. Hardware Introduction

This section describes the functionalities of the outdoor PoE Injector’s

components.

2.1 Product Outlook

Unit: mm

PoE-

in-Use

PoE+Data

PWR

DC Input Range:

24-56V , 1.6 A max.

V+

Figure 2-1: IPOE-165 product outlook

2.4 LED Indicators

LED Color Function

PWR Green Indicates it has power.

PoE-in-Use Green Indicates the port is providing 54V DC in-line

power.

To install the 2-pin Terminal Block Connector on the Outdoor PoE

Injector, simply follow the following steps:

Step 1: Insert positive DC power wire into V+, negative DC power wire

into V-, and grounding wire into Ground.

V+

2-pin

Step 2: Tighten the wire-clamp screws for preventing the wires from

loosening and plug them into the PoE Injector.

Note

1. The wire gauge should be in the range from 20 to 22

AWG.

2. The device must be grounded.

Step 2: Plug the power cable connector into the power input port.

Step 3: sealing insert Insert the into the cable gland body.

Step 4: Attach the clamping nut to the cable gland to complete the

cable assembly.

Note

1. Use only the waterproof cable gland provided in the

package of the IPOE-165.

2. If the above installation procedure is not properly

followed, the warranty will be invalidated.

11.31mm

40.78mm

5.00mm

30.22mm

29.80mm

20.18

13.72

14.00

30.10

3. If the waterproof cable gland is found missing or

damage, please contact your local reseller where you

purchased from.

4. Never use any waterproof cable gland that is not

purchased from PLANET or doesn’t have the same

dimensions of the IPOE-165; it will damage the device

permanently.

3.3 Wall-mount Installation

To install the Outdoor PoE Injector on the wall, please follow the

instructions described below.

Step 1: Find the wall that you want to mount the Outdoor PoE Injector

on.

- 10 - - 12 - - 13 - - 14 -

- 9 - - 11 -

Step 2: Refer to the picture below to screw the four screws on the wall.

140.36mm

59mm

PoE -

in-U se

PoE +Data

PWR

DC Input Ra nge:

24- 56V , 1.6A m ax.

V+

Step 3: Use a screwdriver to screw them into the wall.

3.4 Grounding the Device

Users MUST complete grounding wired with the device; otherwise, a

sudden lightning could cause fatal damage to the device.

Earth Ground

4.ProductSpecications

Product IPOE-165

Hardware Specications

Interface

Input Port 1 x 10/100/1000BASE-T in RJ45 “Data”

port

Output Port

1 x 10/100/1000BASE-T Ethernet with

IEEE 802.3at PoE+

“Data + DC” out RJ45 port

Input Power

Terminal Block

1 x 2-pin terminal block

- Pin 1/2 for Power (Pin 1: V+ / Pin 2: V-)

Network Cable

10BASE-T: UTP category 3, 5 cable

(≤100m)

100BASE-TX: UTP category 5,5e cable

(≤100m)

1000BASE-T: UTP category 5e,6

cable(≤100m)

Data Rate 10/100/1000Mbps

LED Indicator PWR (Green)

PoE-in-use x 1 (Green)

Input Voltage 24~56V DC

Power Consumption

Voltage System on Full Load (Max.)

DC 24V 0.72W 43.4W

DC 36V 0.72W 41.04W

DC 54V 1.08W 40.5W

www.PLANET.com.tw

PLANET Technology Corp.

2351-AH8080-000

10F., No. 96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan

Wa i :rn ng

This device is compliant with Class A of CISPR 32.

In a residential environment this device may cause radio interference.

Industrial IP67 1-Port 802.3at PoE+ Injector

►

IPOE-165

Standards Conformance

Regulatory Compliance FCC Part 15 Class A

Stability Testing

IEC 60068-2-32 (Free fall)

IEC 60068-2-27 (Shock)

IEC 60068-2-6 (Vibration)

Standards Conformances

IEEE 802.3 10BASE-T Ethernet

IEEE 802.3u 100BASE-TX Fast Ethernet

IEEE 802.3ab 1000BASE-T Gigabit

Ethernet

IEEE 802.3af Power over Ethernet

IEEE 802.3at Power over Ethernet Plus

Environment

Operating Temperature -40 ~ 75 degrees C

Storage Temperature -40 ~ 85 degrees C

Humidity 5 ~ 95% (non-condensing)

5. Customer Support

Thank you for purchasing PLANET products. You can browse our online

FAQ resource and user’s manual on PLANET web site rst to check if it

could solve your issue. If you need more support information, please

contact PLANET support team.

PLANET online FAQs:

https://www.planet.com.tw/en/support/faq?method=category&c1=2

Support team mail address:

support@planet.com.tw

Contents are subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp. All other

trademarks belong to their respective owners.

Note

EMD (Lightning) DAMAGE IS NOT CONVERED UNDER

WARRANTY.

3.5 Connecting IPOE-165 to PD

Step 1: Connect the additional Cat5e/6 cable from the PoE+ Out of

the IPOE-165 to a remote PD.

DC Power Line (DC)

1000BASE-T UTP

PoE

1000BASE-T UTP with PoE

PoE

Power Data PoE IP Camera

IPOE-165

Data

100m

802.3at PoE+

Power Supply

Power

DC24-56V

Etherent Switch

Step 2: The PoE+ Out port is the power injector which transmits DC

voltage to the Cat5e/6 cable and transfer data from the Data

source.

Step 3: Once the IPOE-165 detects the existence of an IEEE 802.3at/

af device or Ethernet device, the LED indicator will be lit LAN

steadily, showing it is providing power.

Note

According to IEEE 802.3at/af standard, the IPOE-165

will not inject power to the cable if not connected to a

standard IEEE 802.3at/af device.

ESD Protection Air 8KV DC

Contact 6KV DC

Surge Protection 6KV

Enclosure IP67-rated and IK10 aluminum metal case

Installation Wall-mount ear

Dimensions (W x D x H)

150 x 43.8 x 72.94 mm

169.85 x 43.8 x 72.94 mm, with cable

gland

Weight 339g

373g (with three waterproof cable glands)

MTBF >100000 hours

Power over Ethernet

PoE Standard

IEEE 802.3at Power over Ethernet Plus/

End-span PSE

Backward compatible with IEEE 802.3af

Power over Ethernet

PoE Power Output 54V DC, max. 30 watts

PoE Power Supply Type End-span

Power Pin Assignment 1/2 (+), 3/6 (-)

Produktspezifikationen

Marke:	Planet
Kategorie:	Schalter
Modell:	IPOE-165
Breite:	150 mm
Tiefe:	43.8 mm
Gewicht:	339 g
Produktfarbe:	Grau
Internationale Schutzart (IP-Code):	IP67
Höhe:	72.94 mm
DC input Spannung:	24 - 56 V
Betriebstemperatur:	-40 - 75 °C
Relative Luftfeuchtigkeit in Betrieb:	5 - 95 %
Netzstandard:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Power over Ethernet (PoE):	Ja
Warentarifnummer (HS):	85176990
LED-Anzeigen:	PoE, Power
Temperaturbereich bei Lagerung:	-40 - 85 °C
Luftfeuchtigkeit bei Lagerung:	5 - 95 %
Anzahl der basisschaltenden RJ-45 Ethernet Ports:	2
Basic Switching RJ-45 Ethernet Ports-Typ:	Gigabit Ethernet (10/100/1000)
Wandmontage:	Ja
IK-Kodex:	IK10