Planet FGSD-1821P Bedienungsanleitung

Planet Schalter FGSD-1821P

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Planet FGSD-1821P (4 Seiten) in der Kategorie Schalter. Dieser Bedienungsanleitung war für 40 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Thank you for purchasing PLANET 16-/24-Port 10/100TX 802.3at PoE

+ 2-Port 10/100/1000T + 1-Port shared 1000X SFP Desktop Switch,

FGSD-1821P or FGSD-2621P. “802.3at PoE+ Switch” mentioned in this

Guide refers to the FGSD-1821P or FGSD-2621P

Open the box of the 802.3at PoE+ Switch and carefully unpack it. The

box should contain the following items

The 802.3at PoE+ Switch x 1 User’s Manual x 1 Power Cord x 1

SFP Dust Cap

x 1 Screws x 8 Rack-mounting

Brackets x 2 Rubber Feet x 4

If any of these pieces are missing or damaged, please contact your

dealer immediately; if possible, retain the carton including the original

packing material, and use them again to repack the product in case

there is a need to return it to us for repair.

 Per 10/100BASE-TX Port

LED Color Function

10/100

LNK/ACT Green

Lights to indicate the link through that

port is successfully established.

Blinks to indicate that the Switch is

actively sending or receiving data over

that port.

PoE in Use Amber Lights to indicate the port is providing

PoE DC in-line power.

 Per 10/100/1000BASE-T Port

LED Color Function

10/100/1000

LNK/ACT Green

Lights to indicate the link through that

port is successfully established.

Blinks to indicate that the Switch is

actively sending or receiving data over

that port.

 1000BASE-X SFP Port

LED Color Function

1000

LNK/ACT Green

Lights to indicate the link through that port

is successfully established at 1000Mbps.

Blinks to indicate that the Switch is actively

sending or receiving data over that port.

3 Hardware Installation

3.1 Rack Mounting

To install the 802.3at PoE+ Switch in a 19-inch standard rack, follow the

instructions described below.

Step 1: Place your 802.3at PoE+ Switch on a hard at surface, with

the front panel positioned towards your front side.

Step 2: Attach a rack-mount bracket to each side of the 802.3at PoE+

Switch with supplied screws attached to the package. Figure

3-1 shows how to attach brackets to one side of the 802.3at

PoE+ Switch.

1000X SFP

LNK

PoE-in-Use

ACT

Standard

VLAN

Extend

PWR

PoE Max

2 6

4 8 10 14

12 16

1 5

3 7 9 13

11 15

Figure 3-1: Attaching the Brackets to the 802.3at PoE+ Switch.

Caution

You must use the screws supplied with the mounting

brackets. Damage caused to the parts by using incorrect

screws would invalidate the warranty.

Step 3: Secure the brackets tightly.

Step 4: Follow the same steps to attach the second bracket to the

opposite side.

Standard Mode (default)

Power

PoE IP Camera

PoE

100 meters (328 feet)

PoE

100BASE-TX UTP with PoE

FGSD-1821P

Standard

VLAN

Extend

VLAN Isolation Mode

NVR

Ports 1 to 16

Access Denied

PoE

100BASE-TX UTP with PoE

FGSD-1821P

IP Camera

Ports 17~18 and SFP Port 17

to Ports 1~16 Access Permitted

1000BASE-T UTP

Standard

VLAN

Extend

Extend Mode

Ports 1 to 8

Power

250 meters (820 feet)

PoE

10BASE-T UTP with PoE

PoE IP Camera

FGSD-1821P

Standard

VLAN

Extend

2. Hardware Introduction

2.1 Front Panel

The front panel of the 802.3at PoE+ Switch consists of 16/24 auto-

sensing 10/100BASE-TX RJ45 ports, 2 auto-sensing 10/100/1000BASE-T

RJ45 ports and 1 1000BASE-X SFP port. The LED Indicators are also

located on the front panel of the 802.3at PoE+ Switch.

1000X SFP

LNK

PoE-in-Use

ACT Standard

VLA N

Ex tend

PWR

PoE Ma x

2 64 8 10 1412 16

1 53 7 9 1311 15

Figure 2-1: FGSD-1821P Switch Front Panel

1000X SFP

1 2 3 4 5 6 7 8 9 10 12 13 14 1 5 16 17 18 19 2 0 21 22 23 2411

Standa rd

VLA N

Ex tend

LNK ACT

4 128 16 20 24

3 117 15 19 23

2 106 14 18

PoE Max

1 95 13 17 PWR21

PoE -

in-Use 26

Figure 2-2: FGSD-2621P Switch Front Panel

2.2 LED Indicators

 System

LED Color Function

PWR Green Lights to indicate the Switch has power.

PoE

(max.) Green

O to indicate the PoE power is less than 80%

of total power.

Lights to indicate the PoE power is above

80%.

2.3 Multiple Functions of DIP Switch

The front panel of the 802.3at PoE+ Switch provides one DIP switch for

Standard VLAN Extend, or mode selection. The detailed descriptions

are shown in the following table.

DIP Switch Mode Function

Standard

VLAN

Extend

This mode makes the 802.3at PoE+ Switch

operate as a and all PoE+ general switch

ports operate at 10/100Mbps auto-negotiation.

All ports can communicate with one another.

Standard

VLAN

Extend

This mode makes the 802.3at PoE+ Switch

operate as a switch and VLAN isolation

For FGSD-1821P:

1. Ports 1 to 16 will isolate respectively.

2. Ports 1 to 16 can only communicate with

ports 17~18 (uplink ports) and SFP port 17.

For FGSD-2621P:

1. Ports 1 to 24 will isolate respectively.

2. Ports 1 to 24 can only communicate with

ports 25~26 (uplink ports) and SFP port 26

Standard

VLAN

Extend

This mode makes the 802.3at PoE+ Switch

operate as a switch and Long Reach PoE

1. Ports 1 to 8 support farthest transmission

distance of up to 250 meters

2. Ports 1 to 8 have a data rate of 10Mbps

3. All ports can communicate with one

another.

Note

Please select a DIP switch mode before powering on the

802.3at PoE+ Switch.

2.4 Rear Panel

The rear panel of the 802.3at PoE+ Switch indicates an AC power

socket, which accepts input power from 100 to 240V AC, 50-60Hz, 5A.

50/60Hz

100-240V , 5A max.

Figure 2-3: Switch Rear Panel

 AC Power Receptacle

Power

Notice

The device is a power-required device, which means

it will not work till it is powered. If your networks

should be active all the time, please consider using UPS

(uninterrupted power supply) for your device. It will

prevent you from network data loss or network downtime.

Power

Notice

In some areas, installing a surge suppression device may

also help to protect your 802.3at PoE+ Switch from being

damaged by unregulated surge or current to the 802.3at

PoE+ Switch or the power adapter.

Step 5: After the brackets are attached to the 802.3at PoE+ Switch,

use suitable screws to securely attach the brackets to the

rack, as shown in Figure 3-2.

1000X SF P

LNK

PoE-in-Us e

ACT

Standa r d

VLAN

Exten d

PWR

PoE Max

2 6

4 8 10 14

12 16

1 5

3 7 9 13

11 15

Figure 3-2: Mounting the 802.3at PoE+ Switch in a Rack

Step 6: Connect your 802.3at PoE+ Switch to 802.3af/802.3at

complied PDs and other network devices.

A. Connect one end of a standard network cable to the

10/100/1000BASE-T RJ45 ports on the front panel of the 802.3at

PoE+ Switch.

B. Connect the other end of the cable to the network devices such as

printer servers, workstations or routers, etc.

Step 7: Supply power to the 802.3at PoE+ Switch.

A. Connect one end of the power cable to the 802.3at PoE+ Switch.

B. Connect the power plug of the power cable to a standard wall

outlet.

When the 802.3at PoE+ Switch receives power, the power LED should

remain solid Green.

- 9 -

- 10 -

- 11 -

- 12 - - 13 - - 14 -

3.2 Installing the SFP Transceiver

The sections describe how to insert an SFP transceiver into an SFP port

of the 802.3at PoE+ Switch.

The SFP transceivers are hot-pluggable and hot-swappable. You can plug

in and out the transceiver to/from any SFP port without having to power

down the 802.3at PoE+ Switch, as Figure 3-3 shows.

1000X SFP

LNK

PoE-in-Use

ACT

Standard

VLAN

Extend

PWR

PoE Max

2 6

4 8 10 14

12 16

1 5

3 7 9 13

11 15

16 18

MGB-Series SFP Transceiver

LC Fiber Cable

Figure 3-3: Plugging In the SFP Transceiver

 Approved PLANET SFP Transceivers

PLANET 802.3at PoE+ Switch supports both single mode and multi-mode

SFP transceivers. The website link of ap-proved PLANET SFP transceivers

is shown below:

https://www.planet.com.tw/en/product/mgb-series-transceiver

Note

It is recommended to use PLANET SFP on the 802.3at

PoE+ Switch. If you insert an SFP transceiver that is not

supported, the 802.3at PoE+ Switch will not recognize it.

4.ProductSpecications

Model FGSD-1821P FGSD-2621P

HardwareSpecications

10/100BASE-TX

RJ45 Port with

802.3af/802.3at PoE+

Inject

16 24

10/100/1000BASE-T

RJ45 Port

2 (Port-17 shared with

SFP port)

2 (Port-26 shared

with SFP port)

1000BASE-X SFP/

mini-GBIC Slot

(shared with Port-17)

(shared with Port-26)

DIP Switch

Selectable operation mode

 Standard

 VLAN

 Extend

Dimensions

(W x D x H) 280 x 180 x 44 mm (1U height)

Enclosure Metal

Weight 1800g 1870g

Power Requirements 100~240V AC, 50/60Hz, 5A max.

Power Consumption/

Dissipation

Max. 207 watts/706

BTU

Max. 217 watts/740

BTU

Thermal Fan 1

ESD Protection Contact discharge of ±6KV DC,

Air discharge of ±8KV DC

Surge Protection DierentialMode±4KV,CommonMode±6KV

1. Before we connect the 802.3at PoE+ Switch to the other network

device, we have to make sure both sides of the SFP transceivers are

with the same media type, for example, 1000BASE-SX to 1000BASE-

SX; 1000BASE-LX to 1000BASE-LX.

2. Checkwhether the ber-opticcable type matcheswith the SFPtrans-

ceiver requirement.

To connect to SFP transceiver, please use the 1000BASE-SX

multi-mode ber cable with one side being the male duplex LC

connector type.

 To connect to SFP transceiver, please use the 1000BASE-LX

single-mode ber cable with one side being the male duplex LC

connector type.

Installation Desktop or rack-mount installation

LED

System

Power (Green)

PoE Max. (Green)

10/100/1000T RJ45 Interfaces

10/100/1000 LNK/ACT (Green)

PoE-in-Use (Amber)

1000X SFP Interfaces

1000 LNK/ACT (Green)

Switching

Switch Architecture Store-and-Forward

Switch Fabric 7.2Gbps/non-blocking 8.8Gbps/non-blocking

Switch

Throughput@64bytes 5.36Mpps 6.5Mpps

MAC Address Table 16K entries

Jumbo Frame 16K bytes

Flow Control IEEE 802.3x pause frame for full duplex;

back pressure for half duplex

Power over Ethernet

PoE Standard IEEE 802.3at Power over Ethernet Plus/PSE

PoE Injector Ports 16 24

PoE Power Supply

Type End-span: 1/2 (+), 3/6 (-)

PoE Power Output Per port 55V DC, 600mA. max. 32 watts

PoE Power Budget 185 watts

Number of PDs,

7 watts 16 24

Number of PDs,

15.4 watts 12 12

Number of PDs,

30 watts 6 6

Standards Conformance

Regulatory

Compliance FCC Part 15 Class A, CE

Standards Compliance

IEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-TX

IEEE 802.3ab Gigabit 1000BASE-T

IEEE 802.3z Gigabit SX/LX

IEEE802.3x owcontrolandbackpressure

IEEE 802.3af Power over Ethernet

IEEE 802.3at Power over Ethernet Plus

IEEE802.3azEnergy-EcientEthernet

Environment

Operating

Temperature: 0 ~ 50 degrees C

Relative Humidity: 5 ~ 95%

(non-condensing)

Storage

Temperature: -10 ~ 70 degrees C

Relative Humidity: 5 ~ 95%

(non-condensing)

5. Customer Support

Thank you for purchasing PLANET products. You can browse our online

FAQ resource on PLANET Web site rst to check if it could solve your

issue. If you need more support information, please contact PLANET

support team.

PLANET online FAQs:

https://www.planet.com.tw/en/support/faq

Support team mail address

support@planet.com.tw

Contents are subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp.

All other trademarks belong to their respective owners.

Produktspezifikationen

Marke:	Planet
Kategorie:	Schalter
Modell:	FGSD-1821P
Breite:	280 mm
Tiefe:	180 mm
Gewicht:	1800 g
Produktfarbe:	Blau
Höhe:	44 mm
AC Eingangsspannung:	100 - 240 V
AC Eingangsfrequenz:	50 - 60 Hz
Betriebstemperatur:	0 - 50 °C
Relative Luftfeuchtigkeit in Betrieb:	5 - 95 %
Netzstandard:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Zertifizierung:	FCC Part 15 Class A, CE
Vollduplex:	Ja
Power over Ethernet (PoE):	Ja
Stromverbrauch (max.):	207 W
Gehäusematerial:	Metall
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-10 - 70 °C
Luftfeuchtigkeit bei Lagerung:	5 - 95 %
Switch-Typ:	Unmanaged
Anzahl der basisschaltenden RJ-45 Ethernet Ports:	18
Basic Switching RJ-45 Ethernet Ports-Typ:	Fast Ethernet (10/100)
Auto MDI/MDI-X:	Ja
10G-Unterstützung:	Nein
MAC-Adressentabelle:	16000 Eintragungen
Routing-/Switching-Kapazität:	7.2 Gbit/s
Durchgang:	5.36 Mpps
Jumbo Frames Unterstützung:	Ja
Rack-Einbau:	Ja
Formfaktor:	1U
Anzahl Gigabit Ethernet (Kupfer) Anschlüsse:	2
Eingangsstrom:	5 A
Store-and-Forward:	Ja
Jumbo-Frames:	16000
Wärmeableitung:	706 BTU/h
Anzahl Lüfter:	1 Lüfter
Anzahl installierten SFP Module:	1
Anzahl Power over Ethernet (PoE) Anschlüsse:	16
Halb-Duplex:	Ja
Fast Ethernet (Kupfer)-Anschlüsse:	16