Pioneer PRS-D420 Bedienungsanleitung

Pioneer Empfänger PRS-D420

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pioneer PRS-D420 (100 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/100

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO

NEDERLANDS

êìëëäàâ

BRIDGEABLE FOUR-CHANNEL POWER AMPLIFIER

AMPLIFICATEUR DE PUISSANCE PONTABLE A

QUATRE VOIES

óÖíõêÖïäÄçÄãúçõâ ìëàãàíÖãú åéôçéëíà

ë ÇéáåéÜçéëíúû åéëíéÇéÉé ÇäãûóÖçàü

Owner’s Manual

PRS-D420

Mode d’emploi

1
Before Using This Product  ...................... 1
Visit our website ................................................ 1
In case of trouble  .............................................. 1
CAUTION ........................................................ 2
CAUTION ........................................................ 2
WARNING ........................................................2
Setting the Unit  .......................................... 3
Power Indicator  ................................................ 3
Top Cover .......................................................... 3
Cut Off Frequency Control  .............................. 3
BFC (Beat Frequency Control) Switch
.................... 3
LPF (Low-Pass Filter)/HPF (High-Pass Filter)
Select Switch .............................................. 4
Gain Control ...................................................... 4
Input Select Switch ............................................ 4
Input Switch  ...................................................... 4
Setting the Gain properly  .................................. 5
Connecting the Unit  .................................. 6
Connection Diagram  ........................................ 7
Solderless Terminal Connections ...................... 8
Connecting the Power Terminal ........................ 8
Connecting the Speaker Output Terminals  ...... 9
Using the Speaker Input  .................................... 9
Connecting the Speaker Wires  ........................ 10
Installation ................................................ 12
Example of installation on the floor mat 
or on the chassis  ...................................... 13
Replacing the top cover  .................................. 13
Specifications .......................................... 14
Thank you for purchasing this PIONEER
product. Before attempting operation, be
sure to read this manual.
Private households in the member states of
the EU, in Switzerland and Norway may
return their used electronic products free
of charge to designated collection facilities
or to a retailer (if you purchase a similar
new one).
For countries not mentioned above, please
contact your local authorities for the cor-
rect method of disposal.
By doing so you will ensure that your dis-
posed product undergoes the necessary
treatment, recovery and recycling and thus
prevent potential negative effects on the
environment and human health.
Visit our website
Visit us at the following site:
http://www.pioneer.co.uk
•Register your product. We will keep the
details of your purchase on file to help
you refer to this information in the event
of an insurance claim such as loss or
theft.
•We offer the latest information about
Pioneer Corporation on our website.
In case of trouble
When the unit does not operate properly,
contact your dealer or the nearest autho-
rized PIONEER Service Station.
If you want to dispose this
product, do not mix it with
general household waste. There
is a separate collection system
for used electronic products in
accordance with legislation that
requires proper treatment,
recovery and recycling.
Contents Before Using This Product

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO

NEDERLANDS

êìëëäàâ

CAUTION

•Never replace the fuse with one of greater

value or rating than the original fuse. Use of

an improper fuse could result in overheating

and smoke and could cause damage to the

product and injury including burns.

•Use the supplied hexagonal wrench to tight-

en screws when fastening wires to the ter-

minal. The use of a long, commercially

available hexagonal wrench can cause

excessive torque to be applied possibly

resulting in damage to terminals and wires.

CAUTION

Do NOT install or use your Pioneer ampli-

fier by wiring speakers rated at 4 Ohm (or

lower) in parallel to achieve a 2 Ohm (or

lower) bridged mode (Diagram B).

Amplifier damage, smoke, and overheat-

ing could result from improper bridging.

The amplifier surface could also become

hot to the touch and minor burns could

result.

To properly install or use a bridged mode

for a two-channel amplifier and achieve a

4 Ωload, wire two 8 Ωspeakers in paral-

lel with Left + and Right – (Diagram A) or

use a single 4 Ωspeaker. For a four-chan-

nel amplifier, follow the speaker output

connection diagram for bridging as shown

on the back of your amplifier, and wire

two 8 Ωspeakers in parallel to achieve a 4

Ωload or use a single 4 Ωspeaker per

channel.

If you have any questions or concerns,

please contact your local authorized

Pioneer dealer or call Pioneer customer

service.

WARNING

•We recommend that you use the special red bat-

tery and ground wire [RD-228], which is sold

separately. Connect the battery wire directly to

the car battery positive terminal (+) and the

ground wire to the car body.

•Do not touch the amplifier with wet hands.

Otherwise you may get an electric shock. Also,

do not touch the amplifier when it is wet.

•For traffic safety and to maintain safe driving

conditions, keep the volume low enough so that

you can still hear normal traffic sound.

•Check the connections of the power supply and

speakers if the fuse of the separately sold battery

wire or the amplifier fuse blows. Detect the cause

and solve the problem, then replace the fuse with

another one of the same size and rating.

•To prevent malfunction of the amplifier and

speakers, the protective circuit will cut the power

supply to the amplifier (sound will stop) when an

abnormal condition occurs. In such a case, switch

the power to the system OFF and check the

connection of the power supply and speakers.

Detect the cause and solve the problem.

•Contact the dealer if you cannot detect the cause.

•To prevent an electric shock or short-circuit

during connection and installation, be sure to

disconnect the negative (–) terminal of the battery

beforehand.

•Confirm that no parts are behind the panel when

drilling a hole for installation of the amplifier. Be

sure to protect all cables and important equipment

such as fuel lines, brake lines and the electrical

wiring from damage.

•DO NOT allow amplifier to come into contact

with liquids due to, for example, the location

where the amplifier is installed. Electrical shock

could result. Also, amplifier and speaker damage,

smoke, and overheating could result from contact

with liquids. In addition, the amplifier surface

and the surface of any attached speakers could

become hot to the touch and minor burns could

result.

Diagram A - Proper

Ohm

Speaker

Ohm

Speaker

Pioneer

Amplifier

4 Ohm Bridged Mode

L+ R-

Diagram B - Improper

Ohm

Speaker

Ohm

Speaker

Pioneer

Amplifier

2 Ohm Bridged Mode

L+ R-

Produktspezifikationen

Marke:	Pioneer
Kategorie:	Empfänger
Modell:	PRS-D420
Gewicht:	2900 g
Übertragungstechnik:	Kabelgebunden
Impedanz:	4 Ohm
Anzahl Kanäle:	4 Kanäle
Rauschverhältnis (SNR):	100 dB
Frequenzbereich:	10 - 40000 Hz
Abmessungen (BxTxH):	304 x 195 x 56 mm
Ausgangsleistung:	600 W
Line-out:	Ja
Line-in:	Ja
Beschreibung Ausgangsleistung:	600
Ausgang Energie (DIN):	4 x 150
Maximum Eingabeniveau:	6.5 V