Pioneer PDP-S40B Bedienungsanleitung

Pioneer Lautsprecher PDP-S40B

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pioneer PDP-S40B (44 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/44

PDP-S40B

Operating Instructions

Mode d’emploi

Bedienungsanleitung

Istruzioni di utilizzo

Handleiding

Manual de instrucciones

Speaker System

Enceinte acoustique

Lautsprechersystem

Sistema di diffusori

Luidsprekersysteem

Sistema de altavoces

English

Thank you for buying this Pioneer product.

Please read through these operating instructions before using

your speaker system so you will know how to make the

most of its performance. After you have finished reading the

instructions, put them away in a safe place for future

reference.

CAUTION

About compatibility

This product is designed exclusively for use with the Pioneer

plasma television. For more information on compatibility,

please consult with your nearest Pioneer authorized dealer

or service center.

About installation and setting

• If you want to move the plasma television, make sure

that you remove the speaker first. In addition, do not move

the display holding on to the mounting fittings. This can

result in injury or damage to the unit.

CHECKING THE ACCESSORIES

• Speaker Cables × 2

• Speaker Mounting Fittings

Bracket, for Right and Left Sides

Bracket for Center

• Speaker Mounting Screws

(M5 9× 10 mm : Black) ×

• Operating Instructions

Installation

• Consult your dealer if you encounter any difficulties

with this installation.

• Pioneer is not liable for any damage resulting from

improper installation, improper use, modification, or

natural disasters.

• The speaker is wide, and may become unstable when

installed by a one person alone. This may result in injury

or product damage. Therefore, at least two people must

assemble and install them.

• When installing the speaker, do not use any screws other

than those supplied, otherwise the speaker may come

off from the main unit and fall over.

• When installing the speaker, tighten the screws firmly.

• Please handle the speaker with sufficient care, as the grille

net and the cabinet can become damaged or broken when

they are subjected to strong external impacts.

• Placing a CRT computer screen or CRT monitor near to

the speaker may result in interference or color distortion.

If this happens, distance the monitor from the speaker.

About the input

• In order to prevent damage to the speaker system

resulting from input overload, please observe the following

precautions:

• Do not use the speaker with anything other than the

specified Pioneer plasma television. Doing so may result

in damage or fire.

• Be sure to turn the connected devices off and remove

the power cord from the wall outlet beforehand when

changing the connection or installation method.

• When using a tone control function to greatly emphasize

treble sounds, do not use excessive amplifier volume.

English

Plasma television with the speaker installed

•Attach the fitting for center to the lower center on the

rear panel of the plasma television using the two supplied

screws.

•Attach the fittings for right and left sides to the bottom

right and left on the rear panel of the plasma television

using the supplied screws.

INSTALLATION ON THE PLASMA TELEVISION

Speaker

mounting screw

(M5 x 10 mm)

Speaker mounting

fitting (right side) Speaker cable Speaker mounting

fitting (center)

Speaker

Speaker mounting

fitting (left side)

Speaker

mounting screw

(M5 x 10 mm)

Speaker mounting

screw (M5 x 10 mm)

Bead Band

(Accessories of the plasma television)

When using the table top stand:

NOTE:

Before attaching the speaker, please attach the PDK-TS28 series table top stand (or another Pioneer plasma television stand) to

the plasma television.

1. Attach the speaker mounting fittings to the rear of the plasma television.

2.Then tighten the

screw in the oval-

shaped screw

hole.

Speaker mounting

screw (M5 x 10 mm)

Speaker mounting

fitting for center

1. Tighten the screw in the

round-shaped hole first.

Speaker mounting

screw (M5 x 10 mm)

"L" is inscribed

("R" is inscribed on the

fitting for the right side).

1.Tighten the screw

in the upper screw

hole first.

2.Then, tighten the screw

in the screw hole right

under the upper hole.

Speaker mounting fitting for the left side

(the fitting method is the same as the

fitting for the right side)

Produktspezifikationen

Marke:	Pioneer
Kategorie:	Lautsprecher
Modell:	PDP-S40B
Gewicht:	2900 g
Produktfarbe:	Schwarz
RMS-Leistung:	18 W
Typ:	Fußboden-stehende Lautsprecher
Audio Kanäle:	1.0 Kanäle
Frequenzbereich:	60 - 30000 Hz
Woofer:	Ja
Hochtöner:	Ja
Abmessungen (BxTxH):	1.224 x 115 x 77 mm
Empfindlichkeit:	80 dB