Pioneer HTS-LX70 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pioneer HTS-LX70 (114 Seiten) in der Kategorie Heimkino-Set. Dieser Bedienungsanleitung war für 35 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/114
Operating Instructions | Mode d’emploi
5.1 CH SURROUND SYSTEM
SYSTEME AMBIOPHONIQUE A 5.1 CANAUX
SX-LX70SW
SSP-LX70ST
AS-LX70
AUDIO MULTI-CHANNEL RECEIVER SUBWOOFER
CAISSON DE BASSES ACTIF AVEC AMPLI MULTICANAL INTEGRE
SATELLITE SPEAKER
HAUTS PARLEURS SATELLITES
ACCESSORY BOX
ACCESSOIRES
HTS-LX
IMPORTANT NOTICE THE SERIAL NUMBER FOR THIS EQUIPMENT IS LOCATED IN THE REAR.
PLEASE WRITE THIS SERIAL NUMBER ON YOUR ENCLOSED WARRANTY CARD AND
KEEP IN A SECURE AREA. THIS IS FOR YOUR SECURITY. D1-4-2-6-1_En
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
D8-10-1-2_En
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.
D8-10-1-3_EF
CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the
unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and
televisions, use shielded cables and connectors for connections.
D8-10-3a_En
D3-4-2-1-1_En-A
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
IMPORTANT
WARNING
This equipment is not waterproof. To prevent a fire
or shock hazard, do not place any container filled
with liquid near this equipment (such as a vase or
flower pot) or expose it to dripping, splashing, rain
or moisture. D3-4-2-1-3_B_En
NOTE: THE NO USER-SERVICEABLE PARTS COMPARTMENT WARNING IS LOCATED ON THE APPLIANCE BOTTOM.
WARNING
To prevent injury, the receiver subwoofer must be securely
attached to the floor in accordance with this operating
instructions.
WARNING
The voltage of the available power supply differs
according to country or region. Be sure that the
power supply voltage of the area where this unit
will be used meets the required voltage (e.g., 230 V
or 120 V) written on the rear face. D3-4-2-1-4_A_En
Before plugging in for the first time, read the following
section carefully.
Operating Environment
Operating environment temperature and humidity:
+5 ºC to +35 ºC (+41 ºF to +95 ºF); less than 85 %RH
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight (or
strong artificial light) D3-4-2-1-7c_A_En
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
Only use attachments/accessories specified by the
manufacturer.
Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
Unplug this apparatus during lightning storms or
when unused for long periods of time.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
P1-4-2-2_En
11)
12)
13)
14)
WARNING
To prevent a fire hazard, do not place any naked
flame sources (such as a lighted candle) on the
equipment. D3-4-2-1-7a_A_En
VENTILATION CAUTION
When installing this unit, make sure to leave space
around the unit for ventilation to improve heat
radiation (at least 10 cm at top, 10 cm at rear, and
10 cm at each side).
WARNING
Slots and openings in the cabinet are provided for
ventilation to ensure reliable operation of the
product, and to protect it from overheating. To
prevent fire hazard, the openings should never be
blocked or covered with items (such as newspapers,
table-cloths, curtains) or by operating the
equipment on thick carpet or a bed.
D3-4-2-1-7b_A_En
This product is for general household purposes. Any
failure due to use for other than household purposes
(such as long-term use for business purposes in a
restaurant or use in a car or ship) and which
requires repair will be charged for even during the
warranty period. K041_En
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power
cord when your hands are wet as this could cause a
short circuit or electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such that they
are not likely to be stepped on. A damaged power cord
can cause a fire or give you an electrical shock. Check
the power cord once in a while. When you find it
damaged, ask your nearest PIONEER authorized
service center or your dealer for a replacement. S002_En
This product contains mercury. Disposal of this
material may be regulated due to environmental
considerations. For disposal or recycling
information, please contact your local authorities or
the Electronics Industries Alliance : www.eiae.org.
K057_En
For U.S. and Australia Model
C67-7-3_En
If the AC plug of this unit does not match the AC
outlet you want to use, the plug must be removed
and appropriate one fitted. Replacement and
mounting of an AC plug on the power supply cord of
this unit should be performed only by qualified
service personnel. If connected to an AC outlet, the
cut-off plug can cause severe electrical shock. Make
sure it is properly disposed of after removal.
The equipment should be disconnected by removing
the mains plug from the wall socket when left
unused for a long period of time (for example, when
on vacation). D3-4-2-2-1a_A_En
CAUTION
The STANDBY/ON switch on this unit will not
completely shut off all power from the AC outlet.
Since the power cord serves as the main disconnect
device for the unit, you will need to unplug it from
the AC outlet to shut down all power. Therefore,
make sure the unit has been installed so that the
power cord can be easily unplugged from the AC
outlet in case of an accident. To avoid fire hazard,
the power cord should also be unplugged from the
AC outlet when left unused for a long period of time
(for example, when on vacation). D3-4-2-2-2a_A_En
WARNING: Handling the cord on this product or
cords associated with accessories sold with the
product will expose you to chemicals listed on
proposition 65 known to the State of California and
other governmental entities to cause cancer and
birth defect or other reproductive harm.
D36-P4_A_En
Wash hands after handling
S001_En
Selecting fine audio equipment such as the unit
you’ve just purchased is only the start of your
musical enjoyment. Now it’s time to consider how
you can maximize the fun and excitement your
equipment offers. This manufacturer and the
Electronic Industries Association’s Consumer
Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that
lets the sound come through loud and clear without
annoying blaring or distortion-and, most importantly,
without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing
“comfort level” adapts to higher volumes of sound.
So what sounds “normal” can actually be loud and
harmful to your hearing. Guard against this by
setting your equipment at a safe level BEFORE your
hearing adapts.
To establish a safe level:
Start your volume control at a low setting.
Slowly increase the sound until you can hear it
comfortably and clearly, and without distortion.
Once you have established a comfortable sound
level:
Set the dial and leave it there.
Taking a minute to do this now will help to prevent
hearing damage or loss in the future. After all, we
want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will
provide a lifetime of fun and enjoyment. Since
hearing damage from loud noise is often
undetectable until it is too late, this manufacturer
and the Electronic Industries Association’s
Consumer Electronics Group recommend you avoid
prolonged exposure to excessive noise. This list of
sound levels is included for your protection.
Decibel
Level Example
30 Quiet library, soft whispers
40
Living room, refrigerator, bedroom away from traffic
50 Light traffic, normal conversation, quiet office
60 Air conditioner at 20 feet, sewing machine
70 Vacuum cleaner, hair dryer, noisy restaurant
80
Average city traffic, garbage disposals, alarm clock
at two feet.
THE FOLLOWING NOISES CAN BE DANGEROUS
UNDER CONSTANT EXPOSURE
90
Subway, motorcycle, truck traffic, lawn mower
100 Garbage truck, chain saw, pneumatic drill
120 Rock band concert in front of speakers,
thunderclap
140 Gunshot blast, jet plane
180 Rocket launching pad
Information courtesy of the Deafness Research Foundation.
6
En
Contents
Thank you for buying this Pioneer product.
Please read through these operating instructions so that you will know how to operate your model properly. After you
have finished reading the instructions, put them in a safe place for future reference.
Contents
What’s in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
01 Speaker Setup Guide
Safety precautions when setting up . . . . . . . . . . . . . . 8
Home theater sound setup . . . . . . . . . . . . . . . . . . . . . 8
Standard surround setup . . . . . . . . . . . . . . . . . . . . . 8
Front surround setup . . . . . . . . . . . . . . . . . . . . . . . . 8
Preparing the speakers. . . . . . . . . . . . . . . . . . . . . . . . 8
Using the supplied speaker bases . . . . . . . . . . . . . . 8
When not using the supplied speaker bases . . . . . . 9
Connect the speaker system. . . . . . . . . . . . . . . . . . . . 9
Additional notes on speaker placement . . . . . . . . . . . 9
02 Connecting up
Receiver subwoofer . . . . . . . . . . . . . . . . . . . . . . . . . 10
Side panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Back of display unit . . . . . . . . . . . . . . . . . . . . . . . . . 11
Basic connections . . . . . . . . . . . . . . . . . . . . . . . . . . 12
03 Controls and displays
Display unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Remote control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Operating the receiver subwoofer . . . . . . . . . . . . . 18
Operating the built-in FM/AM tuner . . . . . . . . . . . . 19
Operating XM Radio or SIRIUS Radio. . . . . . . . . . . 20
Operating Pioneer plasma displays and TVs. . . . . . 21
Operating a Pioneer Blu-ray Disc player. . . . . . . . . 22
Operating a Pioneer DVD player. . . . . . . . . . . . . . . 23
Operating a Pioneer HDD/DVD Recorder. . . . . . . . 24
Putting the batteries in the remote control . . . . . . . . 25
Using the remote control . . . . . . . . . . . . . . . . . . . . . 26
Operating the remote control . . . . . . . . . . . . . . . . . . 26
Using the LCD touch screen . . . . . . . . . . . . . . . . . 27
04 Getting started
Using the Auto MCACC setup for optimal surround
sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
05 Listening to your system
Effective Sound (for optimum sound) . . . . . . . . . . . . 29
Auto listening mode. . . . . . . . . . . . . . . . . . . . . . . . . 29
Listening in surround sound. . . . . . . . . . . . . . . . . . . 29
Dolby Pro Logic II Music settings. . . . . . . . . . . . . . 30
Center image setting . . . . . . . . . . . . . . . . . . . . . . . 30
Using Advanced Surround . . . . . . . . . . . . . . . . . . . . 30
Using Front Stage Surround Advance . . . . . . . . . . . 31
Listening in stereo . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Genre Sync Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Using the Sound Retriever . . . . . . . . . . . . . . . . . . . . 31
Listening with MCACC Effect . . . . . . . . . . . . . . . . . . 32
Using Midnight, Loudness and Quiet listening
modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Adjusting the bass and treble. . . . . . . . . . . . . . . . . . 32
Adjusting sound delay . . . . . . . . . . . . . . . . . . . . . . . 32
06 Listening to the radio
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . . 33
Improving poor FM reception . . . . . . . . . . . . . . . . . 33
Improving poor AM sound . . . . . . . . . . . . . . . . . . . 33
Changing the noise cut mode . . . . . . . . . . . . . . . . 33
Memorizing stations . . . . . . . . . . . . . . . . . . . . . . . 34
Listening to station presets . . . . . . . . . . . . . . . . . . 34
Changing the frequency step . . . . . . . . . . . . . . . . . 34
07 Surround sound settings
Using the Sound Setup menu . . . . . . . . . . . . . . . . . 35
Channel level setting . . . . . . . . . . . . . . . . . . . . . . . 35
Speaker distance setting . . . . . . . . . . . . . . . . . . . . 35
Dynamic Range Control. . . . . . . . . . . . . . . . . . . . . 36
Dual mono setting . . . . . . . . . . . . . . . . . . . . . . . . . 36
Using the Virtual Surround Back mode . . . . . . . . . 37
LFE Attenuate . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Adjusting the channel levels using the test tone . . . 37
7
En
Contents
English
08 Other connections
Connecting auxiliary components . . . . . . . . . . . . . . 38
Connecting for digital audio . . . . . . . . . . . . . . . . . 38
Connecting an analog audio component. . . . . . . . 38
Connecting an iPod. . . . . . . . . . . . . . . . . . . . . . . . 39
Listening to an external audio source . . . . . . . . . . . 39
Using XM Radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Connecting your XM Radio receiver . . . . . . . . . . . 40
Listening to XM Radio . . . . . . . . . . . . . . . . . . . . . . 40
Saving channel presets . . . . . . . . . . . . . . . . . . . . . 40
Using the XM Menu . . . . . . . . . . . . . . . . . . . . . . . 41
About XM Satellite Radio. . . . . . . . . . . . . . . . . . . . 41
XM Ready® legal . . . . . . . . . . . . . . . . . . . . . . . . . . 41
XM Ready® subscriptions . . . . . . . . . . . . . . . . . . . 41
Using SIRIUS Radio. . . . . . . . . . . . . . . . . . . . . . . . . 42
Connecting your SIRIUS Connect Tuner . . . . . . . . 42
Listening to SIRIUS Radio . . . . . . . . . . . . . . . . . . . 42
Saving channel presets . . . . . . . . . . . . . . . . . . . . . 43
Using the SIRIUS Menu . . . . . . . . . . . . . . . . . . . . 43
Connecting external antennas . . . . . . . . . . . . . . . . . 44
About control out connections . . . . . . . . . . . . . . . . 44
Connecting using HDMI . . . . . . . . . . . . . . . . . . . . . 44
HDMI mode setting . . . . . . . . . . . . . . . . . . . . . . . . 45
About HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
09 HDMI Control
Making the HDMI Control connections . . . . . . . . . . 46
Setting the HDMI options . . . . . . . . . . . . . . . . . . . . 47
Setting the HDMI Control mode . . . . . . . . . . . . . . 47
Setting the Auto Delay . . . . . . . . . . . . . . . . . . . . . 48
Audio input settings from Plasma displays
(TV Input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Before using synchronization . . . . . . . . . . . . . . . . . 48
Synchronized amp mode. . . . . . . . . . . . . . . . . . . . . 48
Synchronized amp mode operations . . . . . . . . . . . 48
Canceling synchronized amp mode . . . . . . . . . . . 48
10 Additional information
Dimming the display . . . . . . . . . . . . . . . . . . . . . . . . 49
Setting the sleep timer . . . . . . . . . . . . . . . . . . . . . . 49
Setting up the remote to control your TV . . . . . . . . . 49
TV Preset code list . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Resetting the system . . . . . . . . . . . . . . . . . . . . . . . . 50
Installation and maintenance . . . . . . . . . . . . . . . . . 50
Hints on installation . . . . . . . . . . . . . . . . . . . . . . . 50
Surround sound formats . . . . . . . . . . . . . . . . . . . . . 51
Dolby. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
DTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Tuner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Displayed Messages . . . . . . . . . . . . . . . . . . . . . . . 54
XM radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
SIRIUS radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
What’s in the box
Please confirm that the following items are all supplied.
Accessory box (AS-LX70):
Remote control (page 18)
AA/LR6 alkaline batteries p7-x4 (page 25)
Power cord (page 15)
Display unit (page 16)
AM loop antenna (page 13)
FM wire antenna (page 13)
Microphone (for Auto MCACC setup) (page 28)
Control cable (page 44)
Display cable (page 13)
Optical digital cable (page 14)
iPod cable (page 39)
These operating instructions
Warranty card
Receiver subwoofer (SX-LX70SW) box:
Cleaning cloth
Speakers (SSP-LX70ST) box:
Speakers (front/center x2, surround x2) (page 8, 13)
Speaker cables x6 (page 13)
Speaker bases p7-x4 (page 8)
Non-skid pads x16 (page 8, 9)
Screws x4 (page 9)
Speaker Setup Guide
01
8
En
Chapter 1
Speaker Setup Guide
Safety precautions when setting up
When assembling the speakers, lay them down flat on
their side to avoid accidents or injury. Make sure to use a
stable surface when assembling, setting up, and placing
the speakers.
Home theater sound setup
Depending on the size and characteristics of your room,
you can place your speakers in one of two ways using this
system.
Standard surround setup
This is a standard multichannel surround sound speaker
setup for optimal 5.1 channel home theater sound.
Front surround setup
This setup is ideal when rear surround speaker
placement isn’t possible or you want to avoid running
long speaker cables in your listening area. Use this setup
together with the Front Stage Surround Advance modes
in page 31.
Preparing the speakers
This unit comes with speaker bases that can be used to
adjust the speakers to the design of the room in which
they are placed.
Using the supplied speaker bases
1 Attach the non-skid pads to the speaker bases, as
shown below.
Use the adhesive side of the pads to attach them to the
base of each speaker base.
Surround (L) Surround (R)
Front/center (L) Front/center (R)
Listening position
Listening position
Listening position
Listening position
Listening position
Receiver
subwoofer
Surround (L) Surround (R)
Front/center (L) Front/center (R)
Listening position
Listening position
Listening position
Listening position
Listening position
Receiver
subwoofer
Each speaker base
Non-skid pads x 16
Connecting up
02
10
En
Chapter 2
Connecting up
Receiver subwoofer
Side panel
There is a cover over the connectors on the side
panel.
A. When making connections, lift the two hooks and
remove the cover.
B. Once connections are finished, line up the three
positions and place the cover back in its original
position.
1 SIRIUS IN terminal
See Using SIRIUS Radio on page 42.
2 XM IN terminal
See Using XM Radio on page 40.
3 CONTROL OUT jacks (x2)
Connect other Pioneer components
with the supplied
control cable
.
4 DIGITAL OPTICAL IN jacks (x2)
To listen to optical digital audio, change the input to
Digital 1 Digital 2 or .
When the digital output jacks of your TV are connected to
these jacks, set ‘TV Input’ (see page 48).
5 AM LOOP antenna terminal
6 FM antenna socket
7 ANALOG AUDIO IN jacks
Handle sound from an external component by using
stereo audio code. To listen to analog audio, change the
input to Analog.
When the analog output jacks of your TV are connected
to these jacks, setTV Input’ (see page 48).
8 SPEAKERS terminals
Match the colors of the speaker cords to their respective
connectors.
9 AC IN – Power inlet
IN
FRONT
R
R
L
R LL R L
AM LOOP
FM
UNBAL 75
FRONTCENTER SURROUND SUBWOOFER
OPTICAL
IN 1IN 2
OUT
1
OUT
2
SPEAKERS (8 )
ANALOG
AUDIO IN
ANTENNA
DIGITAL
CONTROL
XM
IN
SIRIUS
3 41 2 7 8
9
65
AC IN
A
B
Connecting up
02
12
En
Basic connections
Important
When connecting this system or changing
connections, be sure to switch power off and
disconnect the power cord from the wall socket.
After completing all connections, connect the power
cords to the wall socket.
WARNING
Pioneer bears no responsibility for accidents
resulting from faulty assembly or installation,
insufficient mounting strength of walls, mounting
fixtures (or other building fixtures), misuse or natural
disasters.
HDMI
OUT IN 3
SYS T EM
IN 2 I N 1
2
SYSTEM
F.AUDIO
DISP LAY UNIT
INPUT
iPo d MCACC
SE TUP MIC
SYST EM
1
FLCL FR CR
SRSL
Listening position
Listening position
Listening position
Listening position
Listening position
AM loop antenna
FM antenna
Rear panel
Display unit Receiver subwoofer
Display cable
Front/center
speaker (R)
Front/center
speaker (L)
Surround
speaker (R)
Surround
speaker (L)
Side panel
FRONT
R
R
L
R LL R L
AM LOOP
FRONT
CENTER SURROUND SUB
ANALOG
AUDIO IN
ANTENNA
3
4
Connecting up 02
13
En
English
1 Connect the display unit to the receiver subwoofer.
Plug the display cable into the connector on the rear of
the display unit, then plug the other end of the display
cable into
SYSTEM
connector on the receiver subwoofer.
Caution
Do not attempt to attach the display unit to the wall.
2 Assemble the AM loop antenna.
a. Bend the stand in the direction indicated by the
arrow.
b. Clip the loop onto the stand.
c. If you want to fix to a wall or other surface, perform
step b after first securing the stand with screws.
It is recommended that you determine the reception
strength before securing the stand with the screws.
3 Connect the AM and FM antennas1.
a. Connect one wire of the AM loop antenna to each AM
antenna terminal2.
For each terminal, press down on the tab to open;
insert the wire, then release to secure.
b. Push the FM antenna3 plug onto the center pin of the
FM antenna socket.
4 Connect each speaker.
Each speaker cable has a color-coded connector at
one end and two wires at the other end.
Twist and pull off the protective shields on each wire.
Connect the wires to the speaker. Each speaker in the
illustration can be identified by means of the color-
coded indicator provided on the rear-surface model
label. Match the color-coded wire with the color
indicator on the model label, then insert the color-
coded wire into the red (+) side and the other wire
into the black () side.
Connect the other end to the color-coded speaker
terminals on the side of the receiver subwoofer. Make
sure to insert completely.
Be careful when inserting the speaker plug, as it
must be inserted in the proper direction when being
plugged into one of the terminals. Please make sure
to connect correctly.
Note
1 • Keep antenna cables away from other cables, the display unit and receiver subwoofer.
• If reception with the supplied antenna is poor, see Improving poor FM reception and Improving poor AM sound on page 33 or Connecting
external antennas on page 44.
• Do not attach any antenna other than the provided loop antenna, or an external antenna as described on page 44.
2 • Don’t let it come into contact with metal objects and avoid placing near computers, television sets or other electrical appliances.
• If radio reception is poor, you may be able improve it by re-inserting each antenna wire into the opposite terminal.
• For best reception, do not untwist the AM loop antenna wires or wrap them around the loop antenna.
3 To ensure optimum reception, make sure the FM antenna is fully extended and not coiled or hanging at the rear of the unit.
a b c
1
2
3
Color-coded wire
(Connect to speaker)
Color-coded connector
(Connect to receiver subwoofer)
Black (–) Red (+)
Color-coded wire
Controls and displays
03
16
En
Chapter 3
Controls and displays
Display unit
1 STANDBY/ON
Press to switch the receiver subwoofer on/into standby.
2 INPUT SELECTOR (page 38)
Press repeatedly to select one of the external audio
inputs (HDMI 1 to HDMI 3, Digital 1, Digital 2, Analog,
iPod or Front Audio In).
3 VOL +/– buttons
Use to adjust the volume.
4 POWER ON indicator (Blue)
5 Front panel display
See below for details.
6 IR remote sensor (page 26)
7 HDMI indicator (Red)
Lights when this receiver subwoofer is connected to
HDMI (HDCP) compatible component.
Also lights during initialization, after you plug this unit
into an AC outlet.
Top buttons
1 2 3
4 75 6
Controls and displays
03
18
En
Remote control
For more information on using the remote control,
see Operating the remote control on page 26.
Operating the receiver subwoofer
This section explains how to operate the remote control
for the receiver subwoofer. Note that the controls change
when you have chosen the input function for separate
connected devices.
1  RECEIVER
Switches the receiver subwoofer to On/Standby.
2  TV
Switches the TV to On/Standby.
TV CTRL
Switches the remote control to the TV operating mode
(no effect on the current input source of this unit).
3  SOURCE
Switches the power for the selected component to On/
Standby.
4 Input select buttons
Change the input for this unit. You will also need to press
one of these buttons when operating another connected
component via this remote control.
HDMI 1 to HDMI 3
Switch input from HDMI 1 to HDMI 3.
TV
Switches to the input selected at TV Input setup
(page 48).
TUNER (page 33)
Switches between FM and AM bands.
XM (page 40)
Switches to XM Radio.
SIRIUS (page 42)
Switches to SIRIUS Radio.
LINE (page 39)
Press repeatedly to select one of the receiver
subwoofers audio inputs (Digital 1, , Digital 2
Analog, iPod or Front Audio In).
5 LCD touch screen
Displays the buttons used to control external
components such as a receiver subwoofer, plasma
display, DVD player, Blu-ray disc player, and HDD/DVD
recorder. The current operating mode is displayed at the
top of the remote control’s screen.
Although the LCD touch screen disappears if you do not
perform any operations for a while, it appears when the
screen is touched or a button on the remote control is
pressed.
6 Other component button
Use to operate an HDD/DVD recorder or other connected
component.
7 /// (cursor buttons) and ENTER
Use to control receiver functions.
8 SETUP
Use to access the menu system for surround sound
setup, tuner settings and so on (page 33,
35
,
47
,
49
).
9 RETURN
Use to cancel settings.
RECEIVER SOURCE
HDMI
123
XM
SIRIUS
CTRL
TV
LINETUNER
TV
TOP MENU
DISC
NAVIGATOR
HOME
MENU
MENU
PAGE
RETURN
RECEIVER
RCV VOL MUTE
SETUP
A B C D
1
5
8
10
11
7
4
2
3
9
12
6
6


Produktspezifikationen

Marke: Pioneer
Kategorie: Heimkino-Set
Modell: HTS-LX70

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pioneer HTS-LX70 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Heimkino-Set Pioneer

Bedienungsanleitung Heimkino-Set

Neueste Bedienungsanleitung für -Kategorien-