Pioneer DEH-1320MP Bedienungsanleitung

Pioneer Autoradio DEH-1320MP

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pioneer DEH-1320MP (64 Seiten) in der Kategorie Autoradio. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/64
Русский
NederlandsDeutschEspañolItalianoFrançaisEnglish
Owner’s Manual
Mode d’emploi
Manuale d’istruzioni
Manual de instrucciones
Bedienungsanleitung
Handleiding
Руководство пользователя
DEH-1320MP
DEH-1300MP
CD RDS RECEIVER
AUTORADIO CD RDS
SINTOLETTORE CD RDS
REPRODUCTOR DE CD CON RECEPTOR RDS
CD RDS-EMPFÄNGER
CD RDS-ONTVANGER
CD RDS ПРИЕМНИК
<QRD3059-A/N>1
Thank you for purchasing this PIONEER
product.
To ensure proper use, please read through this
manual before using this product. It is espe-
cially important that you read and observe
WARNINGs and CAUTIONs in this manual.
Please keep the manual in a safe and accessible
place for future reference.
If you want to dispose this product, do not mix
it with general household waste. There is a se-
parate collection system for used electronic
products in accordance with legislation that re-
quires proper treatment, recovery and recy-
cling.
Private households in the member states of
the EU, in Switzerland and Norway may return
their used electronic products free of charge
to designated collection facilities or to a retai-
ler (if you purchase a similar new one).
For countries not mentioned above, please
contact your local authorities for the correct
method of disposal.
By doing so you will ensure that your disposed
product undergoes the necessary treatment,
recovery and recycling and thus prevent po-
tential negative effects on the environment
and human health.
In case of trouble
Should this product fail to operate properly,
please contact your dealer or nearest author-
ized Pioneer Service Station.
About this unit
The tuner frequencies on this unit are allo-
cated for use in Western Europe, Asia, the
Middle East, Africa and Oceania. Use in other
areas may result in poor reception. The RDS
(radio data system) function only operates in
areas with broadcasting RDS signals for FM
stations.
CAUTION
This product is a class 1 laser product classi-
fied under the Safety of laser products, IEC
60825-1:2007, and contains a class 1M laser
module. To ensure continued safety, do not re-
move any covers or attempt to gain access to
the inside of the product. Refer all servicing to
qualified personnel.
CAUTION—CLASS 1M INVISIBLE LASER
RADIATION WHEN OPEN, DO NOT VIEW
DIRECTLY WITH OPTICAL INSTRUMENTS.
CAUTION
!Do not allow this unit to come into contact
with liquids. Electrical shock could result.
Also, damage to this unit, smoke, and over-
heating could result from contact with liquids.
!The Pioneer CarStereo-Pass is for use only in
Germany.
!Always keep the volume low enough to hear
outside sounds.
!Avoid exposure to moisture.
!If the battery is disconnected or discharged,
any preset memory will be erased.
En
2
Section
01 Before You Start
Head unit
a 6789bcd
123 4 5
Button Button
1E (EQ/LOUD) 81to 6
2h(eject) 9TA/AF
3AUDIO aa/b/c/d
4SRC/OFF bFUNC
5Disc loading slot cD (DISP/SCRL)
6Detach button dB (BAND/ESC)
7AUX input jack (3.5
mm stereo jack)
Display indication
6
3
2
1
5
4
7 8 9 a
Indicator State
1
Main dis-
play sec-
tion
!Tuner: band and frequency
!RDS: program service name,
PTY information and other lit-
eral information
!Built-in CD player: elapsed
playback time and text infor-
mation
2
Preset
number/
track num-
ber
!The track number or preset
number.
!If a track number 100 or more
is selected, don the left of
the track number indicator
will light.
Indicator State
3AF AF (alternative frequencies
search) function is on.
4TP A TP station is tuned in.
5TA TA function is on.
6MP3/
WMA
The type of the currently playing
file.
7RPT Repeat play is turned on.
8LOUD Loudness is on.
95(stereo) Receiving the stereo broadcast-
ing.
aLOC Local seek tuning is on.
Basic Operations
Important
!Handle gently when removing or attaching
the front panel.
!Avoid subjecting the front panel to excessive
shock.
!Keep the front panel out of direct sunlight and
high temperatures.
!To avoid damage to the device or vehicle inter-
ior, remove any cables and devices attached
to the front panel before detaching it.
En 3
English
Section
02
Operating this unit
<QRD3059-A/N>2
Removing the front panel to protect your unit from
theft
1Press the detach button to release the front
panel.
2Push the front panel upward and pull it toward
you.
3Always keep the detached front panel in a protec-
tion device such as a protection case.
Re-attaching the front panel
1Slide the front panel to the left.
Make sure to insert the tabs on the left side of the
head unit into the slots on the front panel.
2Press the right side of the front panel until it is
firmly seated.
If you cannot attach the front panel to the head
unit successfully, make sure that you are placing
the front panel onto the head unit correctly. For-
cing the front panel into place may result in da-
mage to the front panel or head unit.
Turning the unit on
1Press SRC/OFF to turn the unit on.
Turning the unit off
1Press SRC/OFF and hold until the unit turns off.
Selecting a source
1Press SRC/OFF to cycle through the sources
listed below:
TUNER (tuner)CD (built-in CD player)AUX
(AUX)
Adjusting the volume
1Turn SRC/OFF to adjust volume.
CAUTION
For safety reasons, park your vehicle when remov-
ing the front panel.
Note
When this units blue/white lead is connected to
the vehicles auto-antenna relay control terminal,
the vehicles antenna extends when this units
source is turned on. To retract the antenna, turn
the source off.
Menu operations identical
for function settings/audio
adjustments/initial settings
Returning to the ordinary display
Canceling the initial setting menu
1Press B (BAND/ESC).
You can also cancel initial settings by holding
down SRC/OFF until the unit turns off.
Tuner
Basic Operations
Selecting a band
1Press B (BAND/ESC) until the desired band (F1,
F2 for FM or MW/LW) is displayed.
Manual tuning (step by step)
1Press cor d.
Seeking
1Press and hold cor d, and then release.
You can cancel seek tuning by briefly pressing c
or d.
While pressing and holding cor d, you can skip
stations. Seek tuning starts as soon as you re-
lease cor d.
Storing and recalling stations
for each band
%When you find a station that you want
to store in memory, press one of the preset
tuning buttons (1 to 6) and hold until the
preset number stops flashing.
Stored radio station frequency can be recalled
by pressing the preset tuning button.
#Press aor bto recall radio station frequen-
cies.
En
4
Section
02 Operating this unit
Switching the RDS display
RDS (radio data system) contains digital infor-
mation that helps search for the radio sta-
tions.
%Press D (DISP/SCRL).
Program service namePTY information
Frequency
#PTY information and the frequency appear on
the display for eight seconds.
PTY list
NEWS (News), AFFAIRS (Current affairs), INFO (Infor-
mation), SPORT (Sports), WEATHER (Weather), FI-
NANCE (Finance), POP MUS (Popular music), ROCK
MUS (Rock music), EASY MUS (Easy listening), OTH
MUS (Other music), JAZZ (Jazz), COUNTRY (Country
music), NAT MUS (National music), OLDIES (Oldies
music), FOLK MUS (Folk music), L.CLASS (Light clas-
sical), CLASSIC (Classical), EDUCATE (Education),
DRAMA (Drama), CULTURE (Culture), SCIENCE
(Science), VARIED (Varied), CHILDREN (Childrens),
SOCIAL (Social affairs), RELIGION (Religion), PHONE
IN (Phone in), TOURING (Travel), LEISURE (Leisure),
DOCUMENT (Documentaries)
Selecting alternative frequencies
When the tuner cannot get a good reception,
the unit automatically searches for a different
station in the same network.
%Press and hold TA/AF to turn AF on or
off.
Using PI Seek
If the tuner cannot find a suitable station, or
the reception status deteriorates, the unit
automatically searches for a different station
with the same programming. During the
search, PI SEEK is displayed and sound is
muted.
Using Auto PI Seek for preset stations
When preset stations cannot be recalled, as
when travelling long distances, the unit can
be set to perform PI Seek during preset recall.
!The default setting for Auto PI Seek is off.
Refer to A-PI (auto PI seek) on page 8.
Receiving traffic announcements
Regardless of the source you are listening to,
you can receive traffic announcements auto-
matically with TA (traffic announcement
standby).
1 Tune in to a TP or enhanced other net-
works TP station.
2 Press TA/AF to turn traffic announce-
ment standby on or off.
3 Turn SRC/OFF to adjust the TA volume
when a traffic announcement begins.
The newly set volume is stored in the memory
and will be recalled for subsequent traffic an-
nouncements.
4 Press TA/AF while a traffic announce-
ment is being received to cancel the an-
nouncement.
The tuner returns to the original source but re-
mains in the standby mode until TA/AF is
pressed again.
Function settings
%Press FUNC to select the function.
After selecting, perform the following proce-
dures to set the function.
!If MW/LW band is selected, only BSM or
LOCAL is available.
BSM (best stations memory)
BSM (best stations memory) automatically stores the
six strongest stations in the order of their signal
strength.
Storing broadcast frequencies with BSM may replace
broadcast frequencies you have saved using 1to 6.
1Press ato turn BSM on.
The six strongest broadcast frequencies are
stored in the order of their signal strength.
To cancel the storage process, press b.
REG (regional)
When AF is used, the regional function limits the se-
lection of stations to those broadcasting regional pro-
grams.
1Press aor bto turn the regional function on or
off.
LOCAL (local seek tuning)
En 5
English
Section
02
Operating this unit
<QRD3059-A/N>3


Produktspezifikationen

Marke: Pioneer
Kategorie: Autoradio
Modell: DEH-1320MP

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pioneer DEH-1320MP benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Autoradio Pioneer

Bedienungsanleitung Autoradio

Neueste Bedienungsanleitung für -Kategorien-