Philips GC3260 Bedienungsanleitung

Philips Zu fordern GC3260

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Philips GC3260 (10 Seiten) in der Kategorie Zu fordern. Dieser Bedienungsanleitung war für 28 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/10

GC3260, GC3240, GC3232, GC3231, GC3230,

GC3221, GC3220

2345

6789

10 11 12 13

14 15

General Description (fig.1).

ASpray nozzle

BFilling opening with cap

CShot-of-steam button

DSpray button

ESteam control

FTemperature light

GCalc-Clean button

HTemperature dial

ICord

JHeel

KWater tank

Important.

Read these instructions for use carefully before using the appliance and save

them for future reference.

◗Check if the voltage indicated on the appliance corresponds to your

electrical supply before plugging in the appliance.

◗If the appliance is provided with an Earth Plug, it must be plugged into

an earthed socket.

◗Do not use the appliance if it has been dropped, if the plug, the cord

or the appliance itself shows visible damage or if it is leaking.

◗Regularly check if the mains cord is still undamaged and safe.

◗If the main cord is damaged, it must be replaced by Philips or its

service agent or a similarly qualified person in order to avoid a hazard.

◗Never leave the appliance unattended when it is connected to the mains.

◗Never immerse the iron in water.

◗Infirm persons should not be allowed to use the appliance without

supervision. Keep the appliance out of the reach of children.

◗The soleplate of the iron can become extremely hot and may cause

burns if touched.

◗Do not allow the cord to come into contact with the soleplate when it

is hot.

◗When you have finished ironing, when you clean the appliance, when

you fill or empty the water tank and also when you leave the iron even

for a short while: set the steam control to position 0, put the iron on

its heel and remove the mains plug from the wall socket.

◗Always place and use the iron on a stable, level and horizontal surface.

◗If a stand is provided with the appliance, ensure that the stand is placed

on a stable surface.

◗This appliance is intended for household use only.

Before first use.

1Remove any sticker, protective foil or plastic shield from the soleplate

(fig. 2).

BThe iron may give off some smoke when you use it for the first time. This will

cease after a short while.

Preparing for use.

Filling the water tank

1Make sure the appliance is unplugged.

2Set the steam control to position 0 (= no steam) (fig. 3).

3Open the cap of the filling opening.

4Tilt the iron backwards and fill the water tank with tap water up to the

maximum level by means of the filling cup (fig. 4).

Do not fill the tank beyond the MAX indication.

Do not put perfume, vinegar, starch, descaling agents, ironing additives,

chemically descaled water or other chemicals in the water tank.

5Close the cap of the filling opening ('click').

Setting the temperature

1Put the iron on its heel and set the required ironing temperature by

turning the temperature dial to the appropriate position (fig. 5).

Check the laundry care label for the required ironing temperature:

-1Synthetic fabrics (e.g. acrylic, nylon, polyamide, polyester)

-1Silk

-2Wool

-3Cotton, linen

If you do not know what kind or kinds of fabric an article is made of,

determine the right ironing temperature by ironing a part that will not be

visible when you wear or use the article.

ENGLISH

Silk, woollen and synthetic materials: iron the reverse side of the fabric to

prevent shiny patches. Avoid using the spray function to prevent stains. Start

ironing the articles that require the lowest ironing temperature, such as those

made of synthetic fibres.

2Put the mains plug in an earthed wall socket.

3When the temperature light has gone out, wait a while before you

start ironing (fig. 6).

The temperature light will go on from time to time during ironing.

Using the appliance.

Steam ironing

1Make sure that there is enough water in the water tank.

2Select the recommended ironing temperature (see chapter 'Preparing

for use', section 'Setting the temperature').

3Select the appropriate steam setting. Make sure that the steam setting

you select is suitable for the ironing temperature selected: (fig. 7).

- 1 - 2 for moderate steam (temperature settings to 2 3)

- 3 - 4 for maximum steam (temperature settings to MAX)3

BThe iron will start steaming as soon as the set temperature has been

reached.

BIf the selected ironing temperature is too low (MIN to ), water may drip2

from the soleplate (see section 'Drip stop').

Ironing without steam

1Set the steam control to position 0 (= no steam) (fig. 3).

2Select the recommended ironing temperature (see chapter 'Preparing

for use', section 'Setting the temperature').

Features.

Spray function

You can use the spray function to remove stubborn creases at any temperature.

1Make sure that there is enough water in the water tank.

2Press the spray button several times to moisten the article to be

ironed (fig. 8).

Shot of steam

A powerful shot of steam helps to remove stubborn creases.

The shot-of-steam function can only be used at temperature settings

between and MAX.2

1Press and release the shot-of-steam button (fig. 9).

Concentrated shot of steam from the special Steam Tip

(types GC3260 and GC3240 only)

The forward-directed concentrated shot of steam enhances the distribution

of steam into every part of your garment. The concentrated shot-of-steam

function can only be used at temperature settings between and MAX.2

1Press and release the shot-of-steam button (fig. 10).

Vertical shot of steam

1The shot-of-steam function can also be used when you hold the iron in

vertical position (fig. 11).

This is useful for removing creases from hanging clothes, curtains etc.

Never direct the steam at people.

Drip stop (types GC3260, 3240, 3232, 3231, 3230 only)

This iron is equipped with a drip-stop function: the iron automatically stops

producing steam when the temperature is too low to prevent water from

dripping out of the soleplate. When this happens you may hear a sound.

Electronic safety shut-off function (type GC3260 only)

◗The electronic safety shut-off function automatically switches the iron

off if it has not been moved for a while (fig. 6).

4239 000 59323

2/10

◗The auto-off light starts blinking to indicate that the iron has been

switched off by the safety shut-off function.

To let the iron heat up again, pick it up or move it slightly. The auto-off light

will go out.

- If the temperature light goes on, wait for it to go out before you start

ironing.

- If the temperature light does not go on, the iron is ready for use.

Cleaning and maintenance.

After ironing

1Remove the mains plug from the wall socket and let the iron cool down.

2Clean the appliance with a damp cloth. Wipe any scale or deposits off

the soleplate with a non-abrasive (liquid) cleaner.

3Empty the water tank after cleaning (fig. 12).

4Leat the iron cool down. Wind the mains cord round the cord storage

facility and fix it with the cord clip.

5Always store the iron standing on its heel in a safe and dry place (fig. 13).

Double-Active Calc System

The Double-Active Calc System guarantees a longer life for the iron.

◗The anti-calc tablets prevent scale from clogging the steam vents. The

tablets are constantly active and do not need to be replaced (fig. 14).

◗The Calc-Clean function helps remove scale particles. Use the Calc-

Clean function once every two weeks. If the water in your area is very

hard (i.e. when flakes come out of the soleplate during ironing), the

Calc-Clean function should be used more frequently.

1Make sure the appliance is unplugged.

2Set the steam control to position 0.

3Fill the water tank to the maximum level.

Do not put vinegar or other descaling agents in the water tank.

4Select the maximum ironing temperature.

5Put the plug in the wall socket.

6Unplug the iron when the temperature light has gone out.

7Hold the iron over the sink, press and hold the Calc-Clean button and

gently shake the iron (fig. 15).

Steam and boiling water will come out of the soleplate. Impurities and flakes

(if any) will be flushed out.

8Release the Calc-Clean button as soon as all the water in the tank has

been used up.

Repeat the Calc-Clean process if the iron still contains a lot of impurities.

After the Calc-Clean process

- Put the plug in the wall socket and let the iron heat up to allow the

soleplate to dry.

- Unplug the iron when the temperature light has gone out.

- Move the hot iron gently over a piece of used cloth to remove any water

stains that may have formed on the soleplate.

- Let the iron cool down before you store it.

Guarantee & service.

If you need information or if you have a problem, please visit the Philips

website at www.philips.com or contact the Philips Customer Care Centre in

your country (you will find its phone number in the worldwide guarantee

leaflet). If there is no Customer Care Centre in your country, turn to your

local Philips dealer or contact the Service Department of Philips Domestic

Appliances and Personal Care BV.

Troubleshooting.

This chapter summarises the most common problems you could encounter

with your iron. Please read the different sections for more details. If you are

unable to solve the problem, contact the Customer Care Centre in your

country.

Solution

Check the mains cord, the

plug and the wall socket.

Set the temperature dial

to the required position.

Fill the water tank (see

chapter 'Preparing for use').

Set the steam control to a

position between 1 and 4

(see chapter 'Using the

appliance').

Select an ironing

temperature that is

suitable for steam ironing

(2to MAX). Put the

iron on its heel and wait

until the temperature light

has gone out before you

start ironing.

Continue ironing in

horizontal position and

wait a while before using

the (vertical) shot-of-

steam function again.

Select an ironing

temperature that is suitable

for steam ironing (2to

MAX). Put the iron on its

heel and wait until the

temperature light has gone

out before you start

ironing.

Press the cap until you

hear a click.

Rinse the water tank and

do not put any additive in

the water tank.

Set the temperature dial to

a temperature suitable for

steam ironing (between

3and MAX). Put the

iron on its heel and wait

until the temperature light

has gone out.

Use the Calc-Clean

function one or more

times (see chapter

'Cleaning and

maintenance').

Move the iron slightly to

deactivate the safety shut-

off function. The light goes

out.

Empty the water tank and

set the steam control to

position 0 after use. Store

the iron on its heel.

Possible cause

There is a connection

problem.

The temperature dial has

been set to MIN.

There is not enough water

in the water tank.

The steam control has

been set to position 0.

The iron is not hot enough

and/or the drip-stop

function has been

activated.

The (vertical) shot-of-

steam function has been

used too often within a

very short period.

The iron is not hot

enough.

The cap of the filling

opening has not been

closed properly.

An additive has been

poured into the water

tank.

The iron is not hot

enough.

Hard water forms flakes

inside the soleplate.

The safety shut-off function

has switched the iron off

(see chapter 'Features').

The iron has been put in

horizontal position with

water still left in the water

tank.

Problem

The iron is plugged in but

the soleplate is cold.

No steam.

No shot of steam or no

vertical shot of steam.

Water droplets drip onto

the fabric.

Flakes and impurities come

out of the soleplate during

ironing.

The light blinks (type

GC3260 only).

Water drips from the

soleplate after the iron has

cooled down or has been

stored.

4239 000 59323

3/10

Produktspezifikationen

Marke:	Philips
Kategorie:	Zu fordern
Modell:	GC3260
Breite:	303 mm
Tiefe:	120 mm
Gewicht:	1340 g
Produktfarbe:	Purple, White
Höhe:	152 mm
AC Eingangsspannung:	220 - 240 V
AC Eingangsfrequenz:	50 - 60 Hz
Fassungsvermögen Wassertank:	0.300 l
Typ:	Trocken- & Dampfbügeleisen
Leistung:	2300 W
Automatische Abschaltung:	Ja
Kabellänge:	3 m
Wasserstandsanzeige:	Ja
Automatisches Anti-Kalk-System:	Ja
Anti-Tropf-Funktion:	Ja
Konstante Dampfleistung:	35 g/min
Kabelaufwicklung:	Ja
Weicher Haltegriff:	Ja
Dampfstoßleistung:	- g/min
Vertikale Dampffunktion:	Ja
Sprayfunktion:	Ja
Dampf-Boost Funktion:	Ja
Nicht verdrehbares Kabel:	Nein
Besonders große Einfüllöffnung:	Ja
Maximaler kontinuierlicher Fluss:	95 g/min
Besonders klare Anzeige:	Ja