Philips BDL4256ET Bedienungsanleitung

Philips Monitor BDL4256ET

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Philips BDL4256ET (40 Seiten) in der Kategorie Monitor. Dieser Bedienungsanleitung war für 42 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/40

www.philips.com/welcome

BDL4256ET

V1.00

User Manual (English)

BDL4256ET

SAFETY INFORMATION

Safety precautions and maintenance

WARNING: Use of controls, adjustments or procedures other than those specied in this

documentation may result in exposure to shock, electrical hazards and/or mechanical hazards.

Read and follow these instructions when connecting and using your display:

Operation:

• Keep the display out of direct sunlight and away from stoves or any other heat sources.

• Remove any object that could fall into ventilation holes or prevent proper cooling of the display’s electronics.

• Do not block the ventilation holes on the cabinet.

• When positioning the display, make sure the power plug and outlet are easily accessible.

• When turning off the display by detaching the power cord, wait 6 seconds before re-attaching the power cord for normal operation.

• Ensure the use of an approved power cord provided by Philips at all times. If your power cord is missing, please contact your local service center.

• Do not subject the display to severe vibration or high impact conditions during operation.

• Do not knock or drop the display during operation or transportation.

Maintenance:

• To protect your display from possible damage, do not put excessive pressure on the LCD panel. When moving your display, grasp the frame to lift; do

notliftthedisplaybyplacingyourhandorngersontheLCDpanel.

• Unplug the display if you are not going to use it for an extensive period of time.

• Unplug the display if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry cloth when the power is off. However, never

use organic solvent, such as, alcohol, or ammonia-based liquids to clean your display.

• To avoid the risk of shock or permanent damage to the set, do not expose the display to dust, rain, water or an excessively moist environment.

• If your display becomes wet, wipe it with dry cloth as soon as possible.

• If a foreign substance or water gets in your display, turn the power off immediately and disconnect the power cord. Then remove the foreign substance

or water, and send the unit to the maintenance center.

• Do not store or use the display in locations exposed to heat, direct sunlight or extreme cold.

• In order to maintain the best performance of your display and ensure a longer lifetime, we strongly recommend using the display in a location that falls

within the following temperature and humidity ranges.

-Temperature: 0-40°C 32-104°F

-Humidity: 20-80% RH

IMPORTANT: Always activate a moving screen saver program when you leave your display unattended. Always activate a periodic screen refresh

application if the unit will display unchanging static content. Uninterrupted display of still or static images over an extended period may cause “burn in”,

also known as “after-imaging” or “ghost imaging”, on your screen. This is a well-known phenomenon in LCD panel technology. In most cases, the “burned

in” or “after-imaging” or “ghost imaging” will disappear gradually over a period of time after the power has been switched off.

WARNING: Severe “burn-in” or “after-image” or “ghost image” symptoms will not disappear and cannot be repaired. This is also not covered under the

terms of your warranty.

WARNING:Useofcontrols,adjustmentsorproceduresotherthanthosespeciedinthisdocumentationmayresultinexposuretoshock,electrical

hazards and/or mechanical hazards.

Service:

• Thecasingcovershouldbeopenedonlybyqualiedservicepersonnel.

• If there is any need for repair or integration, please contact your local service center.

• Do not leave your display under direct sunlight.

If your display does not operate normally, having followed the instructions set out in this document, please contact a technician or your

local service center..

BDL4256ET

iii

Read and follow these instructions when connecting and using your display:

• Unplug the display if you are not going to use it for an extensive period of time.

• Unplug the display if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry cloth when the power is

off. However, never use alcohol, solvents or ammonia-based liquids.

• Consult a service technician if the display does not operate normally after having followed the instructions in this manual.

• Thecasingcovershouldbeopenedonlybyqualiedservicepersonnel.

• Keep the display out of direct sunlight and away from stoves or any other heat sources.

• Remove any object that could fall into the vents or prevent proper cooling of the display’s electronics.

• Do not block the ventilation holes on the cabinet.

• Keep the display dry. To avoid electric shock, do not expose it to rain or excessive moisture.

• When turning off the display by detaching the power cable or DC power cord, wait for 6 seconds before re-attaching the power

cable or DC power cord for normal operation.

• To avoid the risk of shock or permanent damage to the set do not expose the display to rain or excessive moisture.

• When positioning the display, make sure the power plug and outlet are easily accessible.

• IMPORTANT: Always activate a screen saver program during your application. If a still image in high contrast remains on the

screen for an extended period of time, it may leave an “afterimage” or “ghost image” on the front of the screen. This is a well-known

phenomenon that is caused by the shortcomings inherent in the LCD technology. In most cases the afterimage will disappear

gradually over a period of time after the power has been switched off. Be aware that after-image symptoms cannot be repaired and

are not covered under warranty.

REGULATORY INFORMATION

CE Declaration of Conformity

We declare under our responsibility that the product is in conformity with the following standards:

• EN60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 (Safety requirement of Information Technology Equipment).

• EN55022:2010 (Radio Disturbance requirement of Information Technology Equipment).

• EN55024:2010 (Immunity requirement of Information Technology Equipment).

• EN61000-3-2:2006 +A1:2009+A2:2009 (Limits for Harmonic Current Emission).

• EN61000-3-3:2008 (Limitation of Voltage Fluctuation and Flicker)

• EN 50581:2012 (Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous

substances)

• EN50564:2011(Electricalandelectronichouseholdandofceequipment—Measurementoflowpowerconsumption)

following provisions of directives applicable.

• 2006/95/EC (Low Voltage Directive).

• 2004/108/EC(EMCDirective).

• 2009/125/EC (ErP, Energy-related Product Directive, EC No. 1275/2008 and 642/2009 Implementing)

• 2011/65/EU (RoHS Directive) and is produced by a manufacturing organization on ISO9000 level.

Produktspezifikationen

Marke:	Philips
Kategorie:	Monitor
Modell:	BDL4256ET
Touchscreen:	Ja
Bildschirmdiagonale:	42 "
Bildschirmtechnologie:	LED
Anzahl der Farben des Displays:	1,073 Milliarden Farben
Eingebaute Lautsprecher:	Ja
Breite:	976.16 mm
Tiefe:	79.80 mm
Gewicht:	24750 g
Mitgelieferte Kabel:	AC, RS-232, USB, VGA
Produktfarbe:	Schwarz
Höhe:	569.50 mm
RMS-Leistung:	20 W
Anzahl eingebauter Lautsprecher:	2
AC Eingangsspannung:	90 - 240 V
AC Eingangsfrequenz:	50 - 60 Hz
On-Screen-Display (OSD):	Ja
Betriebstemperatur:	5 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	20 - 80 %
Fernbedienung enthalten:	Ja
Schnellstartübersicht:	Ja
Zertifizierung:	CE, CCC, FCC, Class B, UL/cUL, RoHS, EPA, CB, C-Tick, EAC, EMF, KUCAS, SASO
Stromverbrauch (Standardbetrieb):	120 W
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Betriebsanleitung:	Ja
HD-Typ:	Full HD
Bildschirmdiagonale (cm):	106.7 cm
Helligkeit:	450 cd/m²
Reaktionszeit:	12 ms
Kontrastverhältnis:	1300:1
Bildwinkel, horizontal:	178 °
Bildwinkel, vertikal:	178 °
Anzahl HDMI-Anschlüsse:	1
Stromverbrauch (Standby):	0.5 W
Temperaturbereich bei Lagerung:	-20 - 60 °C
Kontrastverhältnis (dynamisch):	500000:1
Audioeingang (L, R):	1
Audio (L,R) Out:	1
Composite Video-Eingang:	1
Komponenteneingang Video (YPbPr/YCbCr):	1
VESA-Halterung:	Ja
Unterstützte Video-Modi:	1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Unterstützte Grafik-Auflösungen:	1440 x 900,1024 x 768 (XGA),1280 x 1024 (SXGA),1280 x 768 (WXGA),1280 x 800 (WXGA),1360 x 768 (WXGA),1366 x 768,1600 x 1200 (UXGA),1920 x 1080 (HD 1080),1920 x 1200 (WUXGA),640 x 480 (VGA),800 x 600 (SVGA)
DVI Anschluss:	Ja
Panel-Montage-Schnittstelle:	200 x 200,400 x 200 mm
Produktdesign:	Digital Signage Flachbildschirm
Anzahl der USB-Anschlüsse:	1
Akkus/Batterien enthalten:	Ja
Anzahl DVI-D-Anschlüsse:	1
Nachhaltigkeitszertifikate:	RoHS
Pixel Abstand:	0.485 x 0.485 mm
DisplayPorts-Version:	1.1a
TV Tuner integriert:	Nein
VGA (D-Sub)-Eingangsanschlüsse:	1
Ausrichtung:	Horizontal/Vertikal
Anzahl der gleichzeitigen Touchpoints:	6
Lebensdauer des Panels:	50000 h
Anzahl HDMI-Eingangsschnittstellen:	1
Computersystem:	Nein
Anzahl DVI-I-Anschlüsse:	1
RS-232C:	Ja
Bildschirmschonerfunktionen:	Ja
Anzahl von Lautsprecherausgängen:	1
DisplayPorts aus:	1
Über das Netzwerk steuerbar:	RS232
Display-Auflösung:	1920 x 1080 Pixel
Ethernet/LAN:	Ja