Philips BDL4221V Bedienungsanleitung

Philips Monitor BDL4221V

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Philips BDL4221V (133 Seiten) in der Kategorie Monitor. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/133
Manual
file:///D|/My%20Documents/dfu/BDL4221V/english/420wn6/MANUAL.HTM2005-11-07 12:54:38 PM
Safety & Troubleshooting
Safety and Troubleshooting Information
Safety Precautions and Maintenance FAQs Troubleshooting Regulatory Information
Other Related Information
Safety precautions and maintenance
WARNING: Use of controls, adjustments or procedures other than those
specified in this documentation may result in exposure to shock, electrical
hazards and/or mechanical hazards.
Read and follow these instructions when connecting and using your computer monitor:
Unplug the monitor if you are not going to use it for an extensive period of time.
Unplug the monitor if you need to clean it with a slightly damp cloth. The screen many be
wiped with a dry cloth when the power is off. However, never use alcohol, solvents or
ammonia-based liquids.
Consult a service technician if the monitor does not operate normally when you have
followed the instructions in this manual.
The casing cover should be opened only by qualified service personnel.
Keep the monitor out of direct sunlight and away from stoves or any other heat source.
Remove any object that could fall into the vents or prevent proper cooling of the monitor’s
electronics.
Do not block the ventilation holes on the cabinet.
Keep the monitor dry. To avoid electric shock, do not expose it to rain or excessive moisture.
If turning off the monitor by detaching power cable or DC power cord, wait for 6 seconds
before attach the power cable or DC power cord for normal operation.
To avoid the risk of shock or permanent damage to the set do not expose the monitor to rain
or excessive moisture.
When positioning the monitor, make sure the power plug and outlet are easily accessible.
IMPORTANT: Always activate a screen saver program during your application. If a still
image in high contrast remains on the screen for an extended period of time, it may leave an
'after-image' or 'ghost image' on the front of the screen. This is a well-known phenomenon
that is caused by the shortcomings inherent in the LCD technology. In most cases the after-
image will disappear gradually over a period of time after the power has been switched off.
Be aware that the after-image symptom cannot be repaired and is not covered under
warranty.
file:///D|/My%20Documents/dfu/BDL4221V/english/420wn6/SAFETY/SAFETY.HTM (1 of 2)2005-11-07 12:54:40 PM
Safety & Troubleshooting
Consult a service technician if the monitor does not operate normally when the operating
instructions given in this manual have been followed.
RETURN TO TOP OF THE PAGE
Installation Locations
Avoid exposure to heat and extreme cold
Do not store or use the product in locations exposed to heat, direct sunlight or extreme cold.
Avoid moving the product between locations with large temperature differences. Choose a
site that falls within the following temperature and humidity ranges.
Temperature: 0-35°C 32-95°F
Humidity: 20-80% RH
Do not subject the product to severe vibration or high impact conditions. Do not place the
product inside a car boot.
Take care not to mishandle this product by either knocking or dropping during operation or
transportation.
Do not store or use the product in locations where there is a high level of humidity or in dusty
environments. Do not allow water or other liquids to spill on or into the product.
RETURN TO TOP OF THE PAGE
file:///D|/My%20Documents/dfu/BDL4221V/english/420wn6/SAFETY/SAFETY.HTM (2 of 2)2005-11-07 12:54:40 PM


Produktspezifikationen

Marke: Philips
Kategorie: Monitor
Modell: BDL4221V
Bildschirmdiagonale: 42 Zoll
Integrierte Kamera: Nein
Bluetooth: Nein
Kopfhörer-Anschluss: 3,5 mm
Breite: 1052 mm
Tiefe: 150 mm
Gewicht: 31000 g
Mitgelieferte Kabel: VGA
Produktfarbe: Schwarz
Höhe: 644 mm
RMS-Leistung: 20 W
Kopfhörerausgänge: 1
Menüsprachen: CHI (SIMPL), DEU, ENG, ESP, FRE, ITA
Betriebstemperatur: 0 - 35 °C
Relative Luftfeuchtigkeit in Betrieb: 5 - 90 %
Eingebauter Ethernet-Anschluss: Nein
Schnellstartübersicht: Ja
Zertifizierung: C-Tick\nCE Mark\nFCC-B, UL, CSA\nMPRII\nTÜV/GS
Stromverbrauch (Standardbetrieb): 140 W
Plug & Play: Ja
HD-Typ: WXGA
Helligkeit: 600 cd/m²
Reaktionszeit: 10 ms
Kontrastverhältnis: 1200:1
Bildwinkel, horizontal: 178 °
Bildwinkel, vertikal: 178 °
Bild-in-Bild: Ja
Anzahl SCART-Anschlüsse: 1
Composite Video-Eingang: 1
PC Audio-Eingang: Ja
Komponenteneingang Video (YPbPr/YCbCr): 1
HDCP: Ja
Unterstützte Video-Modi: 1080i, 720p
Unterstützte Grafik-Auflösungen: 720 x 400
Panel-Montage-Schnittstelle: 600 x 400 mm
Produktdesign: Digital Beschilderung Flachbildschirm
Kabelsperre-Slot: Ja
Slot-Typ Kabelsperre: Kensington
Mittlere Betriebsdauer zwischen Ausfällen (MTBF): 50000 h
Anzahl DVI-D-Anschlüsse: 1
Seitenverhältnis: 16:9
Stromverbrauch (aus): 3 W
Anzahl S-Video-Eingänge: 1
Pixel Abstand: 0.227 x 0.681 mm
Vertikaler Scanbereich: 56 - 75 Hz
Horizontaler Scanbereich: 30 - 63 kHz
Stromeingang: Ja
Relative Luftfeuchtigkeit: 5 - 90 %
PC Audio Ausgang: Nein
sRGB: Ja
Composite Video-Ausgang: 1
Audioausgang: Ja
Schwenkbare Webcam: Nein
Display-Auflösung: 1366 x 768 Pixel

Brauchst du Hilfe?

Wenn Sie Hilfe mit Philips BDL4221V benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Monitor Philips

Bedienungsanleitung Monitor

Neueste Bedienungsanleitung für -Kategorien-