Philips 26HW9100D Bedienungsanleitung

Philips Fernseher 26HW9100D

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Philips 26HW9100D (26 Seiten) in der Kategorie Fernseher. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/26
L05 User’s Manual 091105.1833
1
26HW9100D/30HW9100D User’s Manual
L05 User’s Manual 091105.1833
2
SAFETY INFORMATION
Disconnect mains plug when:
Ø the red light below the TV screen is flashing continuously.
Ø a bright white line is displayed across the screen.
Ø cleaning the TV screen. Never use abrasive cleaning agents. Use a slightly
damp chamois leather or soft cloth.
Ø there is a lightning storm.
Ø the set is left unattended for a prolonged period of time.
No open flame sources, such as lighted candles, should be placed on or near the TV.
Do not place your TV set under direct sunlight or heat.
Leave at least 1/4” around each side of TV set for sufficient ventilation to avoid over-
heating.
Avoid placing set where it is likely to be exposed to rain or water (e.g. near the
window).
No objects filled with liquids should be placed on top the TV in order to avoid
dripping or splashing of liquids into the set.
USEFUL TIPS
Do not leave the television off (in standby mode) for a prolonged period of time.
Switch off set to allow the CRT to be de-gaussed (demagnetized). A de-gaussed CRT
will have optimum picture quality.
Do not re-position the television while it is switched on. Non-uniformity in screen
color may result.
Never attempt to repair a defective TV yourself. Always consult skilled service
personnel.
L05 User’s Manual 091105.1833
3
Before Calling Service
A list of common symptoms is presented as follows. Before you call for service, perform
these simple checks. Some of these symptoms can be readily corrected. Note: Please
become familiar with the commercial features as described in TV Installation / Setup,
because the effects of several of these features, if they are not thoroughly understood,
might appear as faulty operation.
Symptom Possible Corrective Action
TV does not respond to commands (volume,
channel, power), or cannot be turned on if it is off,
or cannot be turned off if it is on.
Check commercial TV setup (TV installation /
setup) menu settings, including power forced on,
front keypad lockout, channel ring, volume
minimum / maximum features.
TV turns off by itself TV automatically turns off after approx. 5
minutes when no RF signal is present.
Check Energy Saving Programmability setting
(see ESP) in TV installation / setup.
Lack of color uniformity (color unevenness)
Switch off the TV using the mains power
button. Wait approximately 20 minutes before
switching on again.
Ensure that the TV is not placed near speakers
or magnetic objects.
No power
Verify that the TV’s AC power cord is plugged into
the mains socket. If there is still no power,
disconnect plug. Wait for 60 seconds and re-insert
plug. Switch on the TV again.
No picture Check antenna connection at rear of the TV.
Check CABLE TUNING setting (NO / YES).
Possible TV station problem. Try another
channel.
Picture ok, no sound. Try increasing the volume.
Check that the sound is not muted. If it is
muted, press the Mute button on the remote
control to restore sound.
Check the MIN VOLUME/ MAX VOLUME
settings in the setup menu
Sound ok, but poor color or no picture Check picture adjustments (brightness, contrast,
color, tint).
Snowy / noisy picture Check antenna, cable, and/or set-top box
connections and antenna / cable.
Possible electrical interference from appliances
or other sources.
Double images / “ghost” images Check antenna, cable and/or set-top box.
Television does not respond to remote control. Check batteries.
Aim remote control handset directly at remote
control sensor lens on the TV.
Channel Change to digital channels is slow Channels must be programmed in the Digital OSD
menu for the shortest channel change time.
Note: These televisions are shipped in commercial mode with Digital OSD turned ON. If is
pressed while on a digital channel the television will display the digital menu instead of the
commercial menu. To properly configure the television using the commercial menu, it is necessary to
be on an analog channel to access the setup m
enu.


Produktspezifikationen

Marke: Philips
Kategorie: Fernseher
Modell: 26HW9100D

Brauchst du Hilfe?

Wenn Sie Hilfe mit Philips 26HW9100D benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Fernseher Philips

Bedienungsanleitung Fernseher

Neueste Bedienungsanleitung für -Kategorien-