Philips 150B4AS Bedienungsanleitung

Philips Monitor 150B4AS

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Philips 150B4AS (88 Seiten) in der Kategorie Monitor. Dieser Bedienungsanleitung war für 26 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/88

Philips 150B4AG/150B4AS Electronic User's Manual

file:///D|/B/english/150b4ags/index.htm [6/11/03 11:17:42 AM]

Safety & Troubleshooting

Safety and Troubleshooting Information

Safety Precautions and Maintenance Installation Locations FAQs Troubleshooting • • • •

Regulatory Information Other Related Information •

Safety precautions and maintenance

WARNING: Use of controls, adjustments, or procedures other than those

specified in this documentation may result in exposure to shock, electrical

hazards, and/or mechanical hazards.

Read and follow these instructions when connecting and using your computer monitor:

● Unplug the monitor, if you are not going to use it for an extensive period of time.

● Unplug the monitor, if you need to clean it with a slightly damp cloth. Wiping the screen with a dry

cloth is possible when the power is off. However, never use alcohol, solvents, or ammonia-based

liquids.

● Consult a service technician if the monitor does not operate normally when following the instructions

in this manual.

● The casing cover should be opened only by qualified service personnel.

● Keep the monitor out of direct sunlight and away from stoves or any other heat source.

● Remove any object that could fall into the vents or prevent proper cooling of the monitor’s

electronics.

● Do not block the ventilation holes on the cabinet.

● Keep the monitor dry. To avoid electric shock, do not expose it to rain or excessive moisture.

● When positioning the monitor, make sure the power plug and outlet are easily accessible.

● If turning off the monitor by detaching power cable or DC power cord, wait for 6 seconds, then attach

the power cable or DC power cord for normal operation.

● To avoid the risk of shock or permanent damage to the set, do not expose the monitor to rain or

excessive moisture.

● When positioning the monitor, make sure the power plug and outlet are easily accessible.

● IMPORTANT: Always activate a screen saver program during your application . If a still image in

high contrast remains on the screen for an extended period of time, it may leave a so called "after-

image" or "ghost image" in front of the screen. This is a well-known phenomenon that is caused by

the shortcomings inherent in the LCD technology. Most of the time the after-image will disappear

gradually over a period of time after switching off the power. Be aware that the after-image symptom

can not be repaired and is not covered under warranty.

Consult a service technician if the monitor does not operate normally when operating instructions of this

manual are followed.

file:///D|/B/english/150b4ags/safety/safety.htm (1 of 2) [6/11/03 11:17:44 AM]

Safety & Troubleshooting

RETURN TO TOP OF THE PAGE

Installation Locations

●

Avoid Heat and Extreme Cold

●

Do not store or use the LCD monitor in locations exposed to heat, direct sunlight, or extreme cold.

●

Avoid moving the LCD monitor between locations with large temperature differences. Choose a site

falling within the following temperature and humidity ranges.

❍

Temperature: 5-40°C 41-104°F

❍

Humidity: 20-80% RH

●

Do not subject the LCD monitor to severe vibration or high impact conditions. Do not place the LCD

monitor inside a car trunk.

●

Take care not to mishandle this product by either knocking or dropping during operation or

transportation.

●

Do not store or use the LCD monitor in locations exposed to high humidity or a dusty environment.

Also do not allow water or other liquids to spill on or into the LCD monitor.

RETURN TO TOP OF THE PAGE

file:///D|/B/english/150b4ags/safety/safety.htm (2 of 2) [6/11/03 11:17:44 AM]

Produktspezifikationen

Marke:	Philips
Kategorie:	Monitor
Modell:	150B4AS
Touchscreen:	Nein
Bildschirmdiagonale:	15 Zoll
Betriebstemperatur:	5 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	20 - 80 %
Zertifizierung:	Regulatory approvals:\n• TÜV/GS, TÜV-Ergo\n• FCC-B, UL, CSA\n• SEMKO\n• prEN50279 Low Emission\n• CE Mark\n• Maximum 1024x768 at 75Hz\n• NUTEK, Energy Star\n• TCO ‘03
Display:	LCD
Stromverbrauch (Standardbetrieb):	18 W
Plug & Play:	Ja
Reaktionszeit:	30 ms
Kontrastverhältnis:	400:1
Bildwinkel, horizontal:	150 °
Bildwinkel, vertikal:	110 °
Temperaturbereich bei Lagerung:	-20 - 60 °C
Audio-System:	Loudspeaker 1W/channel RMS x2
Energiebedarf:	640 x 480 35.0 67
Breite (ohne Standfuß):	343 mm
Tiefe (ohne Standfuß):	218 mm
Höhe (ohne Standfuß):	319 mm
Panel-Montage-Schnittstelle:	- mm
Kompatibilität:	MicrosoftWindows 95/98/ Me & 2000/ XP
Bandbreite:	0.08 GHz
Helligkeit (typisch):	250 cd/m²
Sichtbare Größe (horizontal):	304.1 mm
Sichtbare Größe (vertikal):	228.1 mm
Pixel Abstand:	0.297 mm
Vertikaler Scanbereich:	56 - 76 Hz
Horizontaler Scanbereich:	30 - 61 kHz
Display, sichtbarer Bereich BxH:	304.1 x 228.1 mm
Weitere Anschlüsse:	Connections on monitor body\n- Video 15-pin D-sub (analog) connector\n- DC output 12V, 6.5mm DC connector\n- Power IEC/CEE-22 type male power inlet
Sichtwinkel:	150 °
Empfohlene Auflösung:	1024 x 768 at 60Hz
Eingang:	Analog (D-Sub) input
Stromversorgungsfunktionen - Beschreibung:	Complies with EPA Energy Star and NUTEK specifications
Anzeigetechnologietyp:	Anti-glare polarizer, hard coated
Lautsprecher und Mikrofon:	Lautsprecher
Anzeigebewegungswinkel:	Tilt -5°-25°
Display-Auflösung:	1024 x 768 Pixel