Peavey SP 218 Bedienungsanleitung


Lesen Sie kostenlos die šŸ“– deutsche Bedienungsanleitung fĆ¼r Peavey SP 218 (8 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war fĆ¼r 27 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
www.peavey.com
SP 218Ā®
Passive Sub
Product
Speciī˜Ÿcations
ENGLISH
Description
ī˜Ÿe SPĀ® 218 is a subwoofer designed to enhance the low-end in the SP Series or other full-range speaker systems. Other
uses include bass guitar, keyboard and drum monitoring. ī˜Ÿis loudspeaker system delivers high output, low distortion bass
from two 18ā€ Pro Rider woofers mounted in a vented enclosure. ī˜Ÿis unit is designed for portability. ī˜Ÿe enclosure is con-
structed of hardwood plywood augmented with internal braces with a textured black painted ī˜žnish. A full-length, wrap-
around perforated steel grille protects the front of the enclosure. Tilt-back casters are mounted at the rear bottom corner
to assist in portability. A pole mount plate is located on the right hand side of the enclosure, with an insert for a threaded
pole, using M20 threads. ī˜Ÿe threaded pole is included. Rubber feet and corner casters on the bottom and a corner handle
on top make moving the enclosure an easy, one-person operation.
Inputs are at the rear of the enclosure and consist of two 1/4ā€ jacks, one four-pin twist-lock non-switching jack and one
NeutrikĀ® SpeakonĀ® switching jack. ī˜Ÿe enclosure input is conī˜žgurable, with the default being 4 ohms with both drivers in
parallel when using the parallel inputs. A dual-woofer 2 x 8 ohm conī˜žguration is available through the switching NeutrikĀ®
jack, which disconnects the 4 ohm inputs and provides separate inputs to the woofers when used. ī˜Ÿis ingenious input de-
sign provides maximum ī˜exibility for single-or dual-ampliī˜žer operation, without having to manually rewire the enclosure.
ī˜Ÿis low frequency enclosure is comprised of two 18ā€ Pro RiderĀ® subwoofer drivers in a vented alignment. ī˜Ÿe Pro Rider
driver delivers superior performance due to its advanced cooling system, large 4ā€ voice coil with edge-wound aluminum
wire and high performance cone. ī˜Ÿis design provides strong bass extension and high power handling to complement a
full-range sound system.
As the SP 218 does not include a passive subwoofer crossover, input should be electronically ī˜žltered for subwoofer appli-
cations. In addition, for high power operation, a high-pass ī˜žlter set at 36 Hz and using a 24 dB/octave Linkwitz-Riley ī˜žlter
should be used to improve performance and reliability.
Features
ā€¢ Two 18ā€ Pro RiderĀ® woofers
ā€¢ 2,400W program, and 4,800W peak power handling
ā€¢ Low frequency response down to 41 Hz.
ā€¢ Inputs include one four-pin twist lock connector and two 1/4ā€ phone jacks all in parallel, and one NeutrikĀ®
SpeakonĀ® switching jack for independent access to the woofers
ā€¢ ī˜Ÿreaded pole for mount included
ā€¢ Pole mount plate built-in, threaded for positive pole support
ā€¢ Full-length, wrap-around perforated steel grille
ā€¢ Tilt-back casters
SPECIFICATIONS
Frequency response, 1 meter on-axis, swept-sine in anechoic environment:
51 Hz to 210 Hz (Ā±3 dB)
Usable low frequency limit (-10dB point):
41 Hz
Power handling:
1,200 watts continuous 2,400 watts program 4,800 watts peak
Sound pressure level, 1 watt, 1 meter in anechoic environment:
99 dB SPL (2.00 V parallel input)
Maximum sound pressure level (1 meter):
Anechoic: 129 dB SPL continuous 135 dB SPL peak
Half-space: 135 dB SPL continuous 141 dB SPL peak
Radiation angle measured at -6 dB point of polar response:
Essentially omnidirectional
Transducer complement:
2 x 18ā€ woofer, vented Pro RiderĀ® 1808-8 ALCP
Box tuning frequency:
38 Hz
Minimum recommended active crossover frequency and slope for biĀ¬amping:
100 Hz at 24 dB/octave Linkwitz-Riley Low pass ī˜žlter
Recommended Infra-sonic Filter:
36 Hz (-6 dB point) 24 dB/octave Linkwitz-Riley High-pass.
Impedance ( Z ):
Parallel input: nominal 4.0 ā„¦, minimum: 3.1 ā„¦
Dual-woofer input: nominal 2 x 8.0 ā„¦, minimum: 2 x 6.2 ā„¦
Input connections:
Full range: two 1/4ā€ phone jacks, one four-pin, twist lock jack, one four-pin NeutrikĀ® SpeakOnĀ® switching jack
for independent access to each woofer..
Enclosure materials & ī˜Ÿnish:
Plywood with internal bracing ī˜žnished in black textured paint. Full length black powder coated metal grille.
Dimensions (H x W x D):
Height: 47.28 ā€œ / 1201 mm Width: 20.38ā€ / 518 mm Depth: 26.81ā€ / 681 mm
Net Weight:
135 lbs. (61.3 kg)
Architectural & Engineering Speciī˜Ÿcations
ī˜Ÿe loudspeaker system shall have an operating bandwidth of 51 Hz to 210 Hz. ī˜Ÿe nominal output level shall
be 99 dB when measured at a distance of one meter with an input of one watt. ī˜Ÿe nominal impedance shall be
4.0 ohms or 2 x 8 ohms, depending on conī˜žguration. Two Pro RiderĀ® model 1808-8 ALCP 18ā€ woofers shall be
used in a vented enclosure.
ī˜Ÿe maximum continuous power handling shall be 1,200 watts, maximum program power of 2,400 watts, a peak
power input of at least 4,800 watts and a minimum ampliī˜žer headroom of 3 dB. ī˜Ÿe outside dimensions shall be
47.28 inches high by 20.38 inches wide by 26.81 inches deep. ī˜Ÿe weight shall be 135 lbs. ī˜Ÿe loudspeaker system
shall be a Peavey model SP 218.
SPECIFICATIONS


Produktspezifikationen

Marke: Peavey
Kategorie: Lautsprecher
Modell: SP 218

Brauchst du Hilfe?

Wenn Sie Hilfe mit Peavey SP 218 benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher Peavey

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung fĆ¼r -Kategorien-