Peavey Nashville 112 Bedienungsanleitung

Peavey Empfänger Nashville 112

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Peavey Nashville 112 (8 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 27 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
www.peavey.com
Nashville 112
Amplier
Operating
Manual
FCC/ICES Compliancy Statement
This device complies with Part 15 of the FCC rules and Industry Canada license exempt RSS Standard(s). Operation is -
subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, that may cause undesired operation.
Le présent appareil est conforme aux CNR d’lndustrie Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions suivantes: (1) I’appareil ne doit pas produire de
brouillage, et (2) I’utilisateur de I’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
Warning: Changes or modifications to the equipment not approved by Peavey Electronics Corp. can void the
user’s authority to use the equipment.
Note – This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, , uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try and correct the
interference by one or more of the following measures.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Caution
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
4
Congatulations on our chase y pur of the Peav amplification,ey Nashville 112. As the leader in steel guitar
w ar pre e oud to offer ou this y smaller, e mor por lightw 1000table, eight cousin to the popular Nashville
amplifier. This fr featur 80amp has of the same all ont panel es as the 1000 along a newly designed with
Watt power practicesection, an added headphone jack, and a CD input which makes an ideal choice for it
or small Nashville 112 also and a venues. The features Accutronics reverb a long-pan Celestion Sterling
F250 speaker that has been carefully voiced applications.for steel guitar
We w ou kno y are to t playing, so anxious star wev Star ae included a “Quick t” section and
“R section. These ar cer y y wayecommended Settings” e tain to get ou on our . However,
it is important that
you read the safety precautions first. Scan ough this and thr manual locate
these safety icons:
Each safety icon is followed by a warning. Read that warning carefully before continuing. Once you have
read all of the warnings ,refer to the “Quick Start” section below if you so desire. It is recommended that
you read this manual in its entirety to fully understand the functions of each
feature.
Quick Start - I just wanna play!
The following section takes a “jump in and get your feet wet” approach. If any part seems confusing, refer to the
more detailed sections that follow.
Step 1. Insure that you have read and understand all safety warnings noted through-out the manual. It is
imperative that you follow these precautions for the safety of yourself and your amp.
Step 2. With the amp turned off, plug the power cord into the proper voltage supply indicated on the back of the
unit near the cord retainer.
Step 3. Plug your guitar into either the High or Low Gain input and turn all knobs counterclockwise to their “0”
position.
Step 4. Using the “Recommended Settings” on page 8, find the type of tone that most closely resembles the tone
you wish to obtain.
Step 5. Set the knobs on the front of the unit to match the setting you have selected.
Step 6. Turn your guitar volume down and turn the amp on via the power switch on the back of the unit.
Step 7 Gradually turn the volume of your guitar all the way up or until you are comfortable with the level/tone.
Step 8 To adjust the overall level, use the Master Gain control.
Step 9. To adjust out any undesirable distortion, use the Pre Gain knob. Turning the knob counter-clockwise results
in a decreased level, thus reducing the overdriven signal. Any external effects units can also cause the signal to
overdrive.
Step 10. You should be able to play at this time. Vary the Reverb and/or EQ knobs to get a feel for their effect on
your tone. Most importantly....READ THE REST OF THIS MANUAL.
ENGLISH


Produktspezifikationen

Marke: Peavey
Kategorie: Empfänger
Modell: Nashville 112

Brauchst du Hilfe?

Wenn Sie Hilfe mit Peavey Nashville 112 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Empfänger Peavey

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-