PCE Instruments PCE-5000 Bedienungsanleitung
PCE Instruments
MessgerÀte
PCE-5000
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂŒr PCE Instruments PCE-5000 (20 Seiten) in der Kategorie MessgerĂ€te. Dieser Bedienungsanleitung war fĂŒr 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/20
PCE Americas Inc.
1201 Jupiter Park Drive
Suite 8
Jupiter
FL-33458
USA
From outside US: +1
Tel: (561) 320-9162
Fax: (561) 320-9176
info@pce-americas.com
PCE Instruments UK Ltd.
Unit 11
Southpoint Business Park
Ensign way
Hampshire / Southampton
United Kingdom, SO31 4RF
From outside UK: +44
Tel: (0) 2380 98703 0
Fax: (0) 2380 98703 9
info@pce-instruments.co.uk
www.pce-instruments.com/english
www.pce-instruments.com
Manual
Ultrasonic Hardness Tester PCE-5000
Version 1.3
Date of creation: 16.02.2015
Date of last change: 06.01.2021
Manual
2
Contents
1 Introduction ............................................................................................................. 3
2 Safety notes ............................................................................................................. 3
3 Speciîcations .......................................................................................................... 5
3.1 Technical Speciîcations ............................................................................................................. 5
4 Delivery content ...................................................................................................... 6
4.1 Optional accessories .................................................................................................................. 6
5 System description ................................................................................................. 7
5.1 Main structure and basic principle .............................................................................................. 7
5.2 Control elements 8........................................................................................................................
5.3 Display ........................................................................................................................................ 9
5.4 Measurement probe ................................................................................................................. 10
6 Battery .................................................................................................................... 13
7 Operation ............................................................................................................... 14
7.1 Initial operation ......................................................................................................................... 14
7.2 Measurement ............................................................................................................................ 14
8 Settings .................................................................................................................. 16
8.1 Test setup ................................................................................................................................. 16
8.2 System setup ............................................................................................................................ 17
8.2.1 Language option .................................................................................................................. 17
8.2.2 Sound .................................................................................................................................. 17
8.2.3 Battery manager .................................................................................................................. 17
8.2.4 Display ................................................................................................................................. 17
8.2.5 Date ..................................................................................................................................... 17
8.2.6 Restore default .................................................................................................................... 17
8.3 Save setup ................................................................................................................................ 17
8.3.1 Autosave .............................................................................................................................. 17
8.3.2 Result display ...................................................................................................................... 17
8.3.3 On-line operation ................................................................................................................. 17
8.3.4 Part deletion ........................................................................................................................ 17
8.3.5 All deletion ........................................................................................................................... 17
8.4 18 Print setup . ................................................................................................................................
9 Calibration ............................................................................................................. 18
9.1 Reasons to calibrate ................................................................................................................. 18
9.2 Preparations ............................................................................................................................. 18
9.3 Calibration procedure ............................................................................................................... 18
9.3.1 Calibration with two calibration standards ........................................................................... 18
9.3.2 Calibration with one calibration standard ............................................................................ 18
9.3.3 Batch-Mode ......................................................................................................................... 19
10 Disposal ................................................................................................................. 20
11 Contact ................................................................................................................... 20
11.1 PCE Instruments UK ................................................................................................................ 20
11.2 PCE Americas .......................................................................................................................... 20
Manual
3
1 Introduction
Thank you for purchasing an ultrasonic hardness tester from PCE Instruments.
The ultrasonic durometer is a device, based on a patent îled in 1961. Therefore the hardness
measurement is performed through a diamond placed on a spring. Due to its design and measurement
method, the ultrasonic durometer allows a simple and non-destructive analysis of metallic objects. The
ultrasonic durometer enables measurements on various construction parts, since it is programmed to
measure with diîerent SI-units, the most common of which are the hardness scales according to
Rockwell, Brinell and Vickers. Featuring a RS-232-interface the ultrasonic durometer PCE-5000 can be
connected to a computer in order to read out and print out the measured data. The ultrasonic durometer
allows a detailed overview of all the data, since it can record even the thresholds as well as mean values.
The mean value is automatically generated as soon as more than one measurement is performed with
the ultrasonic durometer PCE-5000. Its design allows reaching even locations that would be otherwise
hard to reach, and it allows reviewing and reading the values comfortably at its graphic display. Due to an
option to calibrate, the ultrasonic durometer can be always calibrated by the user at any time. A
calibration might be necessary, if for example the last measurement was more than three months back, or
when the environment is signiîcantly diîerent from before, if the ultrasonic sensor has already performed
a major amount of measurements, or if the measurement of a deîned calibration object shows a
divergent.
Range of use
- Hardness measurements of the îanged edge and gear root stamping, mold, sheet, surface
hardened tooth and gear groove
- Hardness tests central axes thin-walled pipes and vessels of ,
- Hardness testing of tires and turbine rotor
- Hardness tests cutting blades of
- Hardness testing of welded parts
- Hardness tests of certain opening depths convex depressions, irregular levels ,
- Hardness tests of most ferrous and non-ferrous metals and other alloys in industrial production.
2 Safety notes
Please read this manual carefully and completely before you use the device for the îrst time. The device
may only be used by qualiîed personnel and repaired by PCE Instruments personnel. There is no
warranty damages or injuries caused by non-observance of the manual. on
- The device may only be used approved temperature range in
- The opening of the case should only be done by qualiîed personnel of the PCE Instruments.
- The instrument should never be placed with the user interface (e.g. keyboard side on a table )
- You should not make technical changes the device on
- The appliance ould only be cleaned with a damp cloth / use only -neutral cleaner sh pH
- Do not shake the device since internal components may get damaged.
- Do not scratch objects with the diamond.
- Do not disassemble the unit. Otherwise the warranty will expire.
- Do not use the instrument under inîammable air environment, otherwise it may take îre or
explode.
The ultrasonic hardness tester a precision instrument that must be used with extreme care to avoid is
damage and associated measurement error.
Remove the diamond indenter mentioned above for about half a second after each measurement and
then make a new measurement. Otherwise, the device cann resonance between the indenter ot and a
single sample in a short time.
Please ensure that after each use, the device is always kept in the respective carrying case Avoid .
accidents collisions. and
Do not disconnect the probe from the main unit, since otherwise the device loses its functionality.
Do not use the product near îammable gas, as this could result in îre or explosion.
Produktspezifikationen
| Marke: | PCE Instruments |
| Kategorie: | MessgerÀte |
| Modell: | PCE-5000 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit PCE Instruments PCE-5000 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung MessgerÀte PCE Instruments
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
Bedienungsanleitung MessgerÀte
- MessgerÀte Basetech
- MessgerÀte Hama
- MessgerÀte LogiLink
- MessgerÀte Nedis
- MessgerÀte Panasonic
- MessgerÀte Voltcraft
- MessgerÀte Bosch
- MessgerÀte Flex
- MessgerÀte Laserliner
- MessgerÀte Vonroc
- MessgerÀte Velleman
- MessgerÀte Powerfix
- MessgerÀte Alecto
- MessgerÀte Bresser
- MessgerÀte Techno Line
- MessgerÀte Technoline
- MessgerÀte TFA
- MessgerÀte Cocraft
- MessgerÀte Skil
- MessgerÀte Trotec
- MessgerÀte Hema
- MessgerÀte Einhell
- MessgerÀte Pyle
- MessgerÀte Mitsubishi
- MessgerÀte Topcom
- MessgerÀte Pioneer
- MessgerÀte Megasat
- MessgerÀte Continental Edison
- MessgerÀte Hazet
- MessgerĂ€te GĂŒde
- MessgerÀte Perel
- MessgerÀte Probuilder
- MessgerÀte Wago
- MessgerÀte Workzone
- MessgerÀte ProfiCare
- MessgerÀte Homedics
- MessgerÀte Lanaform
- MessgerÀte Soehnle
- MessgerÀte Bushnell
- MessgerÀte Fysic
- MessgerÀte Laica
- MessgerÀte Amprobe
- MessgerÀte Metrix
- MessgerÀte Goobay
- MessgerÀte IHealth
- MessgerÀte Ansmann
- MessgerÀte Westfalia
- MessgerÀte Honeywell
- MessgerÀte Profitec
- MessgerÀte Reely
- MessgerÀte Holzmann
- MessgerÀte MSW
- MessgerÀte Midland
- MessgerÀte Leica
- MessgerÀte Brandson
- MessgerÀte Toolland
- MessgerÀte Grohe
- MessgerÀte ABB
- MessgerÀte AS Schwabe
- MessgerÀte Kopp
- MessgerÀte Hager
- MessgerÀte Omnitronic
- MessgerÀte Kyoritsu
- MessgerÀte GW Instek
- MessgerÀte Monacor
- MessgerÀte KERN
- MessgerĂ€te BrĂŒder Mannesmann
- MessgerÀte Milwaukee
- MessgerÀte Aktobis
- MessgerÀte Testo
- MessgerÀte Elma
- MessgerÀte Albrecht
- MessgerÀte Kogan
- MessgerÀte Peak
- MessgerÀte IDEAL
- MessgerÀte TrueLife
- MessgerÀte Carrier
- MessgerÀte VDO
- MessgerÀte Digitus
- MessgerÀte Eberle
- MessgerÀte Testboy
- MessgerÀte Fantini Cosmi
- MessgerÀte Greenlee
- MessgerÀte Multimetrix
- MessgerÀte IFM
- MessgerÀte Cablexpert
- MessgerÀte Extech
- MessgerÀte BENNING
- MessgerÀte Metrel
- MessgerÀte Fluke
- MessgerÀte Soler & Palau
- MessgerÀte FLIR
- MessgerÀte Vemer
- MessgerÀte Oregon Scientific
- MessgerÀte Finder
- MessgerÀte Shimano
- MessgerÀte Stabila
- MessgerÀte Elgato
- MessgerÀte Hikmicro
- MessgerÀte Duro Pro
- MessgerÀte Enda
- MessgerÀte Entes
- MessgerÀte GMC Instruments
- MessgerÀte Gossen Metrawatt
- MessgerÀte Hameg
- MessgerÀte Ideal Networks
- MessgerÀte Joy-it
- MessgerÀte LaCie
- MessgerÀte Maximum
- MessgerÀte Megger
- MessgerÀte Mercury
- MessgerÀte Myoton
- MessgerÀte Nieaf-Smitt
- MessgerÀte PICO
- MessgerÀte Psiber
- MessgerÀte RK Technology
- MessgerÀte Sanwa
- MessgerÀte Sekonic
- MessgerÀte Skandia
- MessgerÀte Sonel
- MessgerÀte Uni-T
- MessgerÀte Uni-Trend
- MessgerÀte Wachendorff
- MessgerÀte TFA Dostmann
- MessgerÀte Vimar
- MessgerÀte Owon
- MessgerÀte PeakTech
- MessgerÀte Siig
- MessgerÀte Comark
- MessgerÀte Eltako
- MessgerÀte H-Tronic
- MessgerÀte Beha-Amprobe
- MessgerÀte Chauvin Arnoux
- MessgerÀte Electronics International
- MessgerÀte Eastron
- MessgerÀte Arya
- MessgerÀte Emko
- MessgerÀte Pancontrol
- MessgerÀte Wentronic
- MessgerÀte X-Rite
- MessgerÀte CESYS
- MessgerÀte Trumeter
- MessgerÀte Etymotic
- MessgerÀte ORNO
- MessgerÀte Ebro
- MessgerÀte TDE Instruments
- MessgerÀte Zircon
- MessgerÀte Apollo Ultrasonic
- MessgerÀte BJZ
- MessgerÀte Adwa
- MessgerÀte Greisinger
- MessgerÀte Clean Air Optima
- MessgerÀte Motrona
- MessgerÀte Atmel
- MessgerÀte Tru Components
- MessgerÀte Qubino
- MessgerÀte Janitza
- MessgerÀte CEM
- MessgerÀte Klein Tools
- MessgerÀte J.P. Instruments
- MessgerÀte AREXX
- MessgerÀte Tempo
- MessgerÀte CIRCUTOR
- MessgerÀte Camille Bauer
- MessgerÀte Seaward
- MessgerÀte Dostmann Electronic
- MessgerÀte ClimeMET
- MessgerÀte Cliff
- MessgerÀte Water-i.d.
- MessgerÀte Tektronix
- MessgerÀte AkYtec
- MessgerÀte Aeros
- MessgerÀte Aqua Master Tools
- MessgerÀte Hanna
- MessgerÀte Qualita
- MessgerÀte MGL Avionics
- MessgerÀte Aerospace Logic
- MessgerÀte Johnson Level
- MessgerÀte GMW
- MessgerÀte SOEKS
- MessgerÀte Softing
- MessgerÀte Weltron
- MessgerÀte Oscium
- MessgerÀte Lascar Electronics
- MessgerÀte INFICON
- MessgerÀte Blebox
- MessgerÀte HOZO Design
- MessgerÀte Corentium
- MessgerÀte GQ
- MessgerÀte Murideo
- MessgerÀte SecuTech
- MessgerÀte NetPeppers
- MessgerÀte SensoProtect
- MessgerÀte ZKETECH
- MessgerÀte LabNation
- MessgerÀte MASIMO
- MessgerÀte Milesight
- MessgerÀte Ermenrich
- MessgerÀte Siglent
- MessgerÀte Noyafa
- MessgerÀte Stamos
Neueste Bedienungsanleitung fĂŒr -Kategorien-
16 Oktober 2024
16 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024