Panasonic SB-TP10 Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Panasonic SB-TP10 (6 Seiten) in der Kategorie Hi-Fi-Anlage. Dieser Bedienungsanleitung war fĂĽr 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
Operating Instructions
Model No.
SB-TP20
SB-TP10
RQT6901-B
Speaker System
Supplied accessories
Please check and identify the supplied accessories.
For the United Kingdom
Use numbers indicated in parentheses when asking
for replacement parts.
SB-WA54 (For the United Kingdom)
SB-WA55 (For Australia, New Zealand and others)
AC mains lead . . . . . . . . . . . . . . . . . 1
For the United Kingdom (RJA0038-1U)
For Australia and New Zealand
For others
Note
The included AC mains lead is for use with this unit only.
Do not use it with other equipment.
SB-FS702 / SB-PC702 / SB-FS802 / SB-PC802
Monaural connection cable . . . . . . . 1
For the United Kingdom (RJL1P015B50)
Speaker cables (long: 10 m) . . . . . . 2
For the United Kingdom (REE1203C)
Speaker cables (short: 4 m) . . . . . . . 3
For the United Kingdom (REE1203A)
Note:
“EB” on the packaging indicates the United Kingdom.
Before connecting, operating or adjusting this product, please read
these instructions completely.
Please keep this manual for future reference.
GNEB GCS
SB-TP20 for the United Kingdom.
Actual speakers depend on the system.
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions
carefully.
Speaker system Speaker
Front, Surround SB-FS702 X 4
SB-TP20 Center SB-PC702 X 1
Active subwoofer SB-WA54 X 1
For the United Kingdom
Speaker system Speaker
Front, Surround SB-FS702 X 4
SB-TP20 Center SB-PC702 X 1
Active subwoofer SB-WA55 X 1
For Australia, New Zealand and others
Speaker system Speaker
Front, Surround SB-FS802 X 4
SB-TP10 Center SB-PC802 X 1
Active subwoofer SB-WA54 X 1
For the United Kingdom
This product may receive radio interference caused by
mobile telephones during use. If such interference is
apparent, please increase separation between the product
and the mobile telephone.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS
TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND
THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS
VASES, SHALL BE PLACED ON THE APPARATUS.
CAUTION!
•DO NOT INSTALL OR PLACE THIS UNIT IN A
BOOKCASE, BUILT-IN CABINET OR IN ANOTHER
CONFINED SPACE. ENSURE THE UNIT IS WELL
VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK
OR FIRE HAZARD DUE TO OVERHEATING, ENSURE
THAT CURTAINS AND ANY OTHER MATERIALS DO
NOT OBSTRUCT THE VENTILATION VENTS.
•DO NOT OBSTRUCT THE UNIT’S VENTILATION
OPENINGS WITH NEWSPAPERS, TABLECLOTHS,
CURTAINS, AND SIMILAR ITEMS.
•DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH
AS LIGHTED CANDLES, ON THE UNIT.
•DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY
FRIENDLY MANNER.
THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.
www.panasonic.co.uk
(for UK customers only)
•
Order accessory and consumable items for your product with ease and confidence by tele-
phoning our Customer Care Centre Mon–Friday 9:00am–5:30pm.(Excluding public holidays.)
•
Or go on line through our Internet Accessory ordering application.
•
Most major credit and debit cards accepted.
•
All enquiries transactions and distribution facilities are provided directly by Panasonic UK Ltd.
•
It couldn’t be simpler!
Customer Care Centre
For UK customers: 08705 357357
For Republic of Ireland customers: 01 289 8333
Technical Support
For UK customers: 0870 1 505610
This Technical Support Hot Line number is for Panasonic PC software related products only.
For Republic of Ireland, please use the Customer Care Centre number listed above
for all enquiries.
For all other product related enquiries, please use the Customer Care Centre num-
bers listed above.
For United Kingdom and Republic of Ireland
THIS UNIT IS INTENDED FOR USE IN TROPICAL CLIMATES.
For others
For the United Kingdom, Australia and New Zealand
RQT6901
2
Safety precautions
Placement
Set the unit up on an even surface away from direct sunlight, high
temperatures, high humidity, and excessive vibration. These conditions
can damage the cabinet and other components, thereby shortening
the unit’s service life.
Voltage
Do not use high voltage power sources. This can overload the unit
and cause a fire.
Do not use a DC power source. Check the source carefully when
setting the unit up on a ship or other place where DC is used.
AC mains lead protection
Ensure the AC mains lead is connected correctly and not damaged.
Poor connection and lead damage can cause fire or electric shock.
Do not pull, bend, or place heavy items on the lead.
Grasp the plug firmly when unplugging the lead. Pulling the AC
mains lead can cause electric shock.
Do not handle the plug with wet hands. This can cause electric
shock.
Foreign matter
Do not let metal objects fall inside the unit. This can cause electric
shock or malfunction.
Do not let liquids get into the unit. This can cause electric shock or
malfunction. If this occurs, immediately disconnect the unit from the
power supply and contact your dealer.
Do not spray insecticides onto or into the unit. They contain
flammable gases which can ignite if sprayed into the unit.
Service
Do not attempt to repair this unit by yourself. If sound is interrupted,
indicators fail to light, smoke appears, or any other problem that is not
covered in these operating instructions occurs, disconnect the AC
mains lead and contact your dealer or an authorized service center.
Electric shock or damage to the unit can occur if the unit is repaired,
disassembled or reconstructed by unqualified persons.
Extend operating life by disconnecting the unit from the power
source if it is not to be used for a long time.
Insertion of connector
Even when the connector is per-
fectly inserted, depending on the
type of inlet used, the front part of
the connector may jut out as shown
in the drawing.
However there is no problem using
the unit.
Connector
Approx. 6 mm
Appliance inlet
Caution for AC mains lead
(For the United Kingdom)
( EB“ ” area code model only)
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains plug for
your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the re-
placement fuse has a rating of 5-ampere and that it is approved by
ASTA or BSI to BS1362.
Check for the ASTA mark or the BSI mark m o on the body of the fuse.
If the plug contains a removable fuse cover you must ensure that it
is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a replace-
ment cover is obtained.
A replacement fuse cover can be purchased from your local dealer.
If a new plug is to be fitted please observe the wiring code as stated
below.
If in any doubt please consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured in accordance with the
following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured Blue must be connected to the terminal
which is marked with the letter N or coloured Black or Blue.
The wire which is coloured Brown must be connected to the terminal
which is marked with the letter L or coloured Brown or Red.
WARNING: DO NOT CONNECT EITHER WIRE TO THE
EARTH TERMINAL WHICH IS MARKED WITH THE LET-
TER E, BY THE EARTH SYMBOL nn
nnn OR COLOURED
GREEN OR GREEN/YELLOW.
THIS PLUG IS NOT WATERPROOF—KEEP DRY.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC mains
plug (figures A and B). Confirm the AC mains plug fitted and follow
the instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
2. Replace the fuse and close or attach the fuse cover.
Fuse cover
Figure A Figure B
Fuse
(5 ampere)
Fuse
(5 ampere)
Figure A Figure B
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE
SOCKET OUTLET IN YOUR HOME THEN THE FUSE
SHOULD BE REMOVED AND THE PLUG CUT OFF AND
DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF
THE CUT OFF PLUG IS INSERTED INTO ANY 13-AMPERE
SOCKET.
RQT6901
3
Speaker setup
SB-FS702 or SB-FS802
These speakers are the same. Use them as front or surround speak-
ers.
SB-PC702 / SB-PC802
Use as the center speaker.
Before attaching to a wall or speaker stand
SB-FS702 / SB-PC702 / SB-FS802 / SB-PC802
Unscrew the screw to remove the stand.
Attaching to the wall
SB-FS702 / SB-PC702 / SB-FS802 / SB-PC802
Screw (not included)
Screw the wood screw into a thick and hard part of the wall.
The surface you attach the speakers to must be able to support over
10 kg.
Attaching to speaker stands
SB-FS702 / SB-FS802
Speaker stands (not included)
Plate thickness + 7 to 10 mm
Attach the stands with these holes.
Ensure the following conditions are met when you purchase your
speaker stands.
•Observe the diameter and length of the screws and the distance
between screws as shown in the diagram.
Screw; diameter: 5 mm, pitch: 0.8 mm, length: thickness of stand
plate plus between 7 and 10 mm.
Distance between the centers of the holes: 60 mm
•The stands must be able to support over 10 kg.
•The stands must be stable even if the speakers are in a high posi-
tion.
Do not attach these speakers to walls or ceilings using methods
other than those described here.
Location
Front speakers ( , )
Put on either side of the television.
Center speaker ( )
Put above or below the center of the television, on a shelf or rack or
attach to the wall. Placing it directly on the television can cause the
picture to be distorted.
Surround speakers ( , )
Put to the side of or slightly behind the seating area, about one meter
higher than ear level.
Subwoofer( )
Place anywhere as long as it is a reasonable distance from the tele-
vision. Place it at least 5 cm from the wall as it has a bass reflex port
in the rear.
The front, center, and surround speakers should be placed at ap-
proximately the same distance from the listening position. The angles
in the diagram are approximate.
How you set up your speakers can affect the bass and the sound
field. Note the following points.
•Place on flat, level secure bases.
Use spacers or a similar item to stop them from rocking.
•Placing speakers too close to floors, walls, and corners can result
in excessive bass.
•Cover walls and windows with thick curtain.
•Do not place anything on top of the subwoofer.
SB-FS702
SB-FS802
SB-FS702
SB-FS802
SB-FS702
SB-FS802
SB-PC702
SB-PC802
SB-PC702
SB-PC802
30-35 mm
ø7.5-9.5 mm
7-9 mm
100 mm
60 mm
5 mm
Pitch 0.8 mm
SB-PC702
SB-PC802
SB-FS702
SB-FS802
SB-FS702
SB-FS802
SB-FS702
SB-FS802
SB-WA54
SB-WA55
SB-FS702
SB-FS802
30°
120°
30°


Produktspezifikationen

Marke: Panasonic
Kategorie: Hi-Fi-Anlage
Modell: SB-TP10

Brauchst du Hilfe?

Wenn Sie Hilfe mit Panasonic SB-TP10 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Hi-Fi-Anlage Panasonic

Bedienungsanleitung Hi-Fi-Anlage

Neueste Bedienungsanleitung fĂĽr -Kategorien-