Panasonic PV-DF2703K Bedienungsanleitung

Panasonic Fernsehen PV-DF2703K

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Panasonic PV-DF2703K (152 Seiten) in der Kategorie Fernsehen. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/152
TV
/
DVD
/
VCR Combination
Operating Instructions
Model No. PV-DF2003-K/PV-DF2703-K
Basic Operation
Initial Setup TV Operation
Timer Operation Advanced Operation
For Your Information
LSQT0720A
This operating instruction book is designed for use with models PV-DF2003-K and PV-DF2703-K.
Illustrations in this manual show the PV-DF2703-K. Fea tures may vary, so please read care ful ly.
• Initial Setup and Connection Procedures are on pages 16 to 17.
Please read these instructions carefully before attempting to connect,
operate or adjust this product. Please save this manual.
MULTI FORMAT PLAYBACK
*Ability to play back may depend on recording conditions.
As an NERGY E STAR ® Participant, Panasonic has determined
that this product or product model meets the E SNERGY TAR ®
guidelines for energy effi ciency.
For assistance, please call : 1-800-561-5505 or visit us at www.panasonic.ca
2
Important Safeguards and Pre cau tions
OUTDOOR ANTENNA INSTALLATION
USING THE UNIT
INSTALLATION
1 POWER SOURCE CAUTION
Operate only from power source indicated on unit
or in this manual. If uncertain, have your Electric
Utility Service Company or Video Products Dealer
verify your home power source.
2 POWER CORD PLUG
For safety, this unit has a polarized type plug (one
wide blade), or a three-wire grounding type plug.
Always hold the plug fi rmly and make sure your
hands are dry when plugging in or unplugging the AC
power cord.
Regularly remove dust, dirt, etc. from the plug.
POLARIZED PLUG CAUTION:
The plug fi ts into outlet only one way. If it cannot be fully
inserted, try reversing it. If it still will not fi t, have an
electrician install the proper wall outlet. Do not tamper
with the plug.
GROUNDING PLUG CAUTION:
The plug requires a three-hole grounding outlet.
If necessary, have an electrician install the proper
outlet. Do not tamper with the plug.
3 POWER CORD
To avoid unit malfunction, and to protect against
electrical shock, fi re or personal injury:
- Keep power cord away from heating appliances and
walking traffi c. Do not rest heavy objects on, or roll
such objects over the power cord.
- Do not tamper with the cord in any way.
- An extension cord should have the same type plug
(polarized or grounding) and must be securely
connected.
- Overloaded wall outlets or extension cords are fi re
hazards.
- Frayed cords, damaged plugs, and damaged or
cracked wire insulation are hazardous and should
be replaced by a qualifi ed electrician.
4 DO NOT BLOCK VENTILATION HOLES
Ventilation openings in the cabinet release heat
generated during operation. If blocked, heat
build-up may result in a fi re hazard or heat
damage to cassettes or discs.
For your protection:
a.Never cover ventilation slots while unit is ON,
or operate unit while placed on a bed, sofa, rug,
or other soft surface.
b.Avoid built-in installation, such as a book case
or rack, unless properly ventilated.
5 AVOID EXTREMELY HOT LOCATIONS OR
SUDDEN TEMPERATURE CHANGES
Do not place unit over or near a heater or radiator, in
direct sunlight, inside closed ve hi cles, in high
temperature [over 95 °F (35 °C)], or in over 75%
humidity. If unit is suddenly moved from a cold place
to a warm one, moisture may con dense in unit and on
the tape causing dam age. Never sub ject unit to
vibration, im pact, or place it so that the sur face is tilted
as in ter nal parts may be se ri ous ly dam aged.
6 TO AVOID PERSONAL INJURY
• Never place unit on support or
stand that is not fi rm, level, and
adequately strong. The unit could
fall causing serious injury to a
child or adult and damage to the
unit.
• Move any appliance and cart
combination with care.
Quick stops, excessive force, and uneven surfaces
may cause objects to overturn.
• Carefully follow all operating instructions.
Before unit is brought out of storage or moved to a new location,
refer again to the INSTALLATION section of these safe guards.
1 KEEP UNIT WELL AWAY FROM WATER OR MOISTURE,
such as vases, sinks, tubs, etc.
2 IF EXPOSED TO RAIN, MOISTURE, OR STRONG IMPACT,
unplug unit and have it inspected by a qualifi ed service
technician before use.
3 ELECTRICAL STORMS
During a lightning storm, or before leaving unit unused for
extended periods of time, disconnect all equipment from the
power source as well as the antenna and cable system.
4 WHEN UNIT IS PLUGGED IN
• DO NOT OPERATE IF:
- liquid has spilled into unit.
- unit was dropped or otherwise damaged.
- unit emits smoke, odours, or noises.
Immediately unplug unit, and have it inspected by a service
technician to avoid potential fi re and shock hazards.
• Never drop or push any object through openings in unit.
Touching internal parts may cause electric shock or fi re
hazard. Do not put any foreign object on the tray.
• Keep magnetic objects, such as speakers, away from unit to
avoid electrical interference.
5 USING ACCESSORIES
Use only accessories recommended by the manufacturer to
avoid risk of fi re, shock, or other hazards.
6 CLEANING UNIT
Unplug unit. Use a clean, dry, chemically untreated cloth to
gently remove dust or debris. DO NOT USE cleaning fl uids,
aerosols, or forced air that could over-spray, or seep into unit
and cause electrical shock. Any substance, such as wax,
adhesive tape, etc. may mar the cabinet surface. Exposure to
greasy, humid, or dusty areas may adversely affect internal
parts.
READ AND RETAIN ALL SAFETY AND
OPERATING INSTRUCTIONS. HEED ALL
WARNINGS IN THE MANUAL AND ON UNIT
SERVICE
1 DO NOT SERVICE PRODUCT YOURSELF
If, after carefully following detailed operating in struc tions, the unit
does not operate properly, do not attempt to open or remove
covers, or make any adjustments not described in the manual.
Unplug unit and contact a qualifi ed service tech ni cian.
2 REPLACEMENT OF PARTS
Make sure the service technician uses only parts specifi ed by the
manufacturer, or have equal safety char ac ter is tics as original
parts. The use of unauthorized substitutes may result in fi re,
electric shock, or other hazards.
3 SAFETY CHECK AFTER SERVICING
After unit is serviced or repaired, request that a thorough safety
check be done as described in the manufacturer’s service
literature to ensure video unit is in safe operating condition.
1 SAFE ANTENNA AND CABLE CONNECTION
An outside antenna or cable system must be properly grounded
to provide some protection against built up static charges and
voltage. Section 810 of the National Electrical Code, ANSI/NFPA
70 (in Canada, part 1 of the Canadian Electrical Code) provides
information regarding proper
grounding of the mast and supporting
structure, grounding of the lead-in
wire to an antenna discharge unit,
size of grounding conductors,
location of antenna discharge unit,
connection to grounding electrodes,
and requirements for the grounding
electrode.
2 KEEP ANTENNA CLEAR OF HIGH VOLTAGE POWER LINES
OR CIRCUITS
Locate an outside antenna system well away from power lines
and electric light or power circuits so it will never touch these
power sources should it ever fall. When installing antenna,
absolutely never touch power lines, circuits or other power
sources as this could be fatal.
GROUND
CLAMP
ELEC T RIC
SERVICE
EQUIPMENT
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECT ION 810-20)
GRO UNDING CONDU CT ORS
(NEC SECT ION 810-21)
GRO UND CLAMPS
POWER SERVIC E GROUND ING
ELECT RODE SYST EM
(NEC ART 250, PART H)
NEC
- NAT IONAL ELECT RICAL CODE
3
This product utilizes both a Cathode Ray Tube (CRT) and other components that contain lead. Disposal
of these materials may be regulated in your community due to environmental considerations. For
disposal or recycling information please contact your local authorities, or the Electronics Industries
Alliance: <http://www.eiae.org.>
CAUTION:
UNIT IS A CLASS I LASER PRODUCT.
HOWEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH
COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE THE UNIT CORRECTLY AS INSTRUCTED.
WHEN THIS UNIT IS PLUGGED TO THE WALL OUTLET, DO NOT
PLACE YOUR EYES CLOSE TO THE OPENING OF THE DISC TRAY
AND OTHER OPENINGS TO LOOK INTO THE INSIDE OF THIS UNIT.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT ATTEMPT TO REPAIR THE
UNIT YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
Safety Precautions
CAUTION:
LASER RADIATION
WHEN OPEN. DO NOT
STARE INTO BEAM.
This symbol warns the user that uninsulated voltage within
the unit may have suffi cient magnitude to cause electric
shock. Therefore, it is dangerous to make any kind of
contact with any inside part of this unit.
This symbol alerts the user that important literature
concerning the operation and main te nance of this unit has
been included. Therefore, it should be read carefully in
order to avoid any problems.
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS
INSIDE REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
(Inside of product)
This video recorder, equipped with the HQ (High Quality) System, is compatible with existing VHS
equipment. Only use those tapes with the mark. It is recommended that only cassette tapes that
have been tested and inspected for use in 2, 4, 6, and 8 hour VCR machines be used. This television
receiver provides display of television closed captioning.
Warning : To prevent fi re or shock hazard, do not expose this equipment
to rain or mois ture.
Caution : To prevent electric shock, match wide blade of plug to wide
slot, fully insert.
6
Unit & Cassette Information
Features for a Quality Picture
Digital Auto Tracking
Continuously analyzes the signal and adjusts for
optimum picture quality.
Manual Tracking Control (to reduce picture noise)
Use during Playback and Slow Motion mode to
reduce picture noise. Press the 3 or 6 NUMBER
key on the remote control or CH on the unit
until the picture clears up. To return to Auto
Tracking, press POWER off, then on again a few
seconds later.
V-Lock Control
In Still mode, the 3 or 6 NUMBER key on the
remote control or CH on the unit operate as a
V-Lock control to reduce jitter.
V
I
DE
O
HEADS
M
AY
NEED C
LEA
N
I
N
G
P
L
EASE
I
NSERT
HEAD
C
LEA
N
I
N
G
CASSETTE
OR
REFER
T
O
M
A
NU
AL
END
:
P
L
AY
Playing older or damaged tapes may eventually
cause video heads to become clogged.
Head Cleaning
• Use “dry” type head cleaning cassette only.
(Part No. NV-TCL30PT is recommended.)
• Follow cleaning tape directions carefully. Excessive
use of head cleaning tape can shorten the video head
life.
During playback this
screen appears if
clogging is detected.
To clear message from
screen, press PLAY on
the remote or unit.
Head Clog Sensor
Unit auto adjusts clock for DST (Daylight Saving
Time.)
DST (Daylight Saving Time)
• If your area does not observe Daylight Saving Time,
select DST : OFF (see “Clock” on pages 18 and 19).
• Keep these time changes in mind when pro gram ming
the unit for timer recordings.
■ Spring (First Sunday in April)
DST: ON ➞ Sets clock ahead one hour.
■ Autumn (Last Sunday in October)
DST: ON ➞ Turns clock back one hour.
Record/Playback Time
Only use tapes with the mark in this unit.
Tape Speed
Setting
Type of Video Cassette
T60 T120 T160
SP
(Standard
Play)
1 Hour 2 Hours 2 Hours
40 Minutes
LP
(Long Play) 2 Hours 4 Hours
5 Hours
20 Minutes
SLP
(Super Long
Play)
3 Hours 6 Hours 8 Hours
Apparatus Claims of U.S. Patent Nos. 4,631,603,
4,577,216, 4,819,098, and 4,907,093, licensed
for limited viewing uses only.
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. Patents and other intellectual
property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright
protection technology must be authorized by
Macrovision Corporation, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Macrovision Cor po ra tion.
Reverse engineering or dis as sem bly is
prohibited.
12
Front View of the unit
Location of Controls (continued)
<Model PV-DF2703-K unit shown>
Phones Jack
Connect an earphone
or headphones.
Built In Speaker
Disc Tray Cassette Compartment
Audio/Video Input
Connector 2 (LINE 2)
Connect from other
component.
S-Video Input Connector 2
(LINE 2)
Connect from other component
with S-Video.
If the disc cannot be removed,
First unplug unit.
Then, prepare a rigid wire (e.g.
an extended paper clip, etc.) and,
applying moderate force, insert it
straight into the hole at the base of
the tray. The tray will eject a little.
Now, pull the tray all the way out and
remove the disc.
POWER
Turns the unit on or off.
STOP
Stops playback.
PAUSE
Pauses picture in Playback mode
and frame advance picture in Still
mode.
PLAY
Begins playback.
SKIP
Skips one chapter or track.
Goes to next screen.
SKIP
Skips back one chapter or track.
Goes to previous menu screen.
REC
Records a program.
FAST FORWARD/SEARCH
Fast forwards tape and
forward visual search.
Increases slow motion
speed in Still mode.
PLAY
Begins playback.
REPEAT
Set to see a recording over
and over.
REWIND/SEARCH
Rewinds tape and searches
reverse scene. Decreases
slow motion speed in Still
mode.
STOP
Stops playback.
EJECT
Eject the tape.
TV/FM
Sets to TV/FM mode.
CHANNEL UP/DOWN
Selects a channel.
TRACKING UP/DOWN
Reduces picture noise during Playback
and Slow Motion.
VOLUME UP/DOWN
Adjusts volume.
Disc Operation
Tape Operation
OPEN/CLOSE
Opens or closes the disc tray.

Produktspezifikationen

Marke: Panasonic
Kategorie: Fernsehen
Modell: PV-DF2703K

Brauchst du Hilfe?

Wenn Sie Hilfe mit Panasonic PV-DF2703K benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Fernsehen Panasonic

Panasonic

Panasonic Viera TX-L37G20E Bedienungsanleitung

2 Oktober 2024
Panasonic

Panasonic TV-40S55AEY Bedienungsanleitung

27 September 2024
Panasonic

Panasonic TX-32MST606 Bedienungsanleitung

27 September 2024
Panasonic

Panasonic TX-15LT2M Bedienungsanleitung

22 September 2024
Panasonic

Panasonic TH-L32XV6A Bedienungsanleitung

21 September 2024
Panasonic

Panasonic TX-50CXR700 Bedienungsanleitung

21 September 2024
Panasonic

Panasonic TX-65LX620E Bedienungsanleitung

19 September 2024
Panasonic

Panasonic TX-43GX551B Bedienungsanleitung

17 September 2024
Panasonic

Panasonic Viera TX-L37E5Y Bedienungsanleitung

17 September 2024
Panasonic

Panasonic TH-42PW7BXJ Bedienungsanleitung

16 September 2024

Bedienungsanleitung Fernsehen

Neueste Bedienungsanleitung für -Kategorien-

Sony

Sony KE-65A8 Bedienungsanleitung

16 Oktober 2024
Samsung

Samsung QN85QN800AF Bedienungsanleitung

16 Oktober 2024
Thomson

Thomson 24TM2490 Bedienungsanleitung

16 Oktober 2024
Daewoo

Daewoo DSJ-5520 Bedienungsanleitung

15 Oktober 2024
Sharp

Sharp LC-52D65U Bedienungsanleitung

15 Oktober 2024
Hisense

Hisense 50A7100FTUK Bedienungsanleitung

15 Oktober 2024
Salora

Salora LCD 1941 DVX Bedienungsanleitung

15 Oktober 2024
Grundig

Grundig 65 CUA 7390 Mailand Bedienungsanleitung

15 Oktober 2024
Grundig

Grundig 50 GUB 6300 Bedienungsanleitung

15 Oktober 2024
Grundig

Grundig 40 CFA 6490 Venedig Bedienungsanleitung

15 Oktober 2024