Optoma HD600X Bedienungsanleitung

Optoma Beamer HD600X

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Optoma HD600X (54 Seiten) in der Kategorie Beamer. Dieser Bedienungsanleitung war für 19 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/54
English
1
OPTIONS .......................................... 36
OPTIONS | Advanced ........................ 37
OPTIONS | Lamp Settings ................. 38
Appendices ....................................39
Troubleshooting ................................39
Image Problems ................................. 39
Other Problems .................................. 40
Projector Status Indication ................. 41
Remote Control Problems ................. 42
Replacing the lamp ...........................43
Compatibility Modes .........................45
Computer Compatibility ..................... 45
Video Compatibility ............................ 46
RS232 Commands ...........................47
RS232 Pin Assignments .................... 47
RS232 Protocol Function List ............ 48
Ceiling Mount Installation ..................51
Optoma Global Ofces .....................52
Regulation & Safety notices ..............54
Table of contents .............................1
Usage Notice ...................................2
Safety Information ...............................2
Precautions .........................................3
Eye Safety Warnings ..........................5
Product Features ................................5
Introduction ......................................6
Package Overview ..............................6
Product Overview ...............................7
Main Unit .............................................. 7
Control Panel ....................................... 8
Input / Output Connections .................. 9
Remote Control .................................. 10
Installation ..................................... 11
Connecting the Projector ..................11
Connect to Computer/Notebook ........ 11
Connect to Video Sources ................. 12
Powering the projector On/Off .........13
Powering On the Projector ................. 13
Powering Off the Projector ................. 14
Warning Indicator ............................... 14
Adjusting the Projected Image ..........15
Adjusting the Projectors Height ........ 15
Adjusting the Projectors Zoom /
Focus ................................................. 15
Adjusting Projection Image Size ........ 16
User Controls ................................17
Control Panel & Remote Control ......17
Control Panel ..................................... 17
Remote Control .................................. 18
On-screen Display Menus ................20
How to operate ................................. 20
Menu Tree .......................................... 21
IMAGE ............................................... 23
IMAGE | Advanced ............................ 25
DISPLAY ............................................ 28
DISPLAY | 3D ................................... 31
SETUP ............................................... 32
SETUP | Signal -RGB Source ............ 34
SETUP | Signal -Video Source .......... 35
Table of contents
22
Usage Notice
Safety Information
The lightning  ash with arrow head within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of suf cient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH
VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE
CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
Class B emissions limits
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Important Safety Instruction
1. Do not block any ventilation openings. To ensure reliable operation of
the projector and to protect from over heating, it is recommended to
install the projector in a location that does not block ventilation. As an
example, do not place the projector on a crowded coffee table, sofa,
bed, etc. Do not put the projector in an enclosure such as a book case
or a cabinet that restricts air  ow.
2. Do not use the projector near water or moisture. To reduce the risk
of  re and/or electric shock, do not expose the projector to rain or
moisture.
3. Do not install near heat sources such as radiators, heaters, stoves or
any other apparatus such as ampli ers that emits heat.
4. Clean only with dry cloth.
5. Only use attachments/accessories speci ed by the manufacturer.
6. Do not use the unit if it has been physically damaged or abused.
Physical damage/abuse would be (but not limited to):
Unit has been dropped.
Power supply cord or plug has been damaged.
Liquid has been spilled on to the projector.
Projector has been exposed to rain or moisture.
Something has fallen in the projector or something is loose inside.
Do not attempt to service the unit yourself. Opening or removing covers
may expose you to dangerous voltages or other hazards. Please call
Optoma before you send the unit for repair.
7. Do not let objects or liquids enter the projector. They may touch
dangerous voltage points and short out parts that could result in re or
electric shock.
8. See projector enclosure for safety related markings.
9. The unit should only be repaired by appropriate service personnel.
English
3
Usage Notice
When the lamp
reaches the end
of its life, the
projector will not
turn back on until
the lamp module
has been replaced.
To replace the
lamp, follow the
procedures listed
under “Replacing
the Lamp” section
on pages 43-44.
Precautions
Please follow all warnings, precautions and
maintenance as recommended in this users
guide.
Warning- Do not look into the projector’s lens when the lamp is
on. The bright light may hurt your eyes.
Warning- To reduce the risk of re or electric shock, do not
expose this projector to rain or moisture.
Warning- Please do not open or disassemble the projector as
this may cause electric shock.
Warning- When replacing the lamp, please allow the unit to
cool down. Follow instructions as described on pages
43-44.
Warning- This projector will detect the life of the lamp itself.
Please be sure to change the lamp when it shows
warning messages.
Warning- Reset the “Lamp Reset” function from the on-screen
display “OPTIONS | Lamp Settings” menu after
replacing the lamp module (refer to page 38).
Warning- When switching the projector off, please ensure
the cooling cycle has been completed before
disconnecting power. Allow 90 seconds for the
projector to cool down.
Warning- Do not use lens cap when projector is in operation.
Warning- When the lamp is approaching the end of its lifetime,
the message “Lamp Warning: Lamp life exceeded.”
will show on the screen. Please contact your local
reseller or service center to change the lamp as soon
as possible.
NoteNote


Produktspezifikationen

Marke: Optoma
Kategorie: Beamer
Modell: HD600X

Brauchst du Hilfe?

Wenn Sie Hilfe mit Optoma HD600X benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Beamer Optoma

Bedienungsanleitung Beamer

Neueste Bedienungsanleitung für -Kategorien-