Optoma DH1009 Bedienungsanleitung

Optoma Beamer DH1009

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Optoma DH1009 (68 Seiten) in der Kategorie Beamer. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/68
1English
SETUP | Audio Settings ..................... 43
SETUP | Security ............................... 44
SETUP | Advanced ............................ 45
OPTIONS ........................................... 46
OPTIONS | Lamp Settings ................. 49
OPTIONS | HDMI Link Settings ......... 50
OPTIONS | Remote Settings ............. 52
OPTIONS | Advanced ........................ 53
Appendices ....................................54
Troubleshooting ................................54
Image Problems ................................. 54
Other Problems .................................. 56
Remote Control Problems ................. 56
LED Lighting Messages ..................... 57
On Screen Messages ........................ 58
Replacing the Lamp ..........................59
Installing and Cleaning the Dust Filter 61
Compatibility Modes .........................62
Ceiling Mount Installation ..................64
Optoma Global Ofces .....................65
Regulation & Safety Notices .............67
FCC Notice ........................................ 67
Declaration of Conformity for EU coun-
tries .................................................... 68
Table of Contents ............................1
Usage Notice ...................................2
Safety Information ...............................2
Precautions .........................................3
Eye Safety Warnings ..........................6
Introduction ......................................7
Package Overview ..............................7
Product Overview ...............................8
Main Unit .............................................. 8
Keypad ................................................. 9
Input/Output Connections .................. 10
Remote Control .................................. 11
Installation .....................................12
Connecting to the Projector ..............12
Connecting a Computer/Notebook .... 12
Connecting a Video source ................ 13
Connect to 3D Video Devices ...........14
Using the 3D glasses ........................16
Powering On/Off the Projector ..........17
Powering On the Projector ................. 17
Powering Off the Projector ................. 18
Warning Indicator ............................... 19
.......................................................... 19
Adjusting the Projected Image ..........20
Adjusting the Projectors Height ........ 20
Adjusting the Projectors Zoom / Focus 21
Adjusting Projection Image Size ........ 21
User Controls ................................23
Keypad & Remote Control ................23
Keypad ............................................... 23
Remote Control .................................. 24
On-screen Display Menus ................31
How to operate .................................. 31
Menu Tree .......................................... 32
IMAGE ............................................... 34
IMAGE | Advanced ............................ 36
DISPLAY ............................................ 38
DISPLAY | 3D ................................... 40
SETUP ............................................... 41
Table of Contents
2
English
Usage Notice
The lightning ash with arrow head within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous volt-
age” within the product’s enclosure that may be of sufcient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance (servic-
ing) instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH
VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE
CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
Class B emissions limits
This Class B digital apparatus meets all requirements of the Canadian Inter-
ference-Causing Equipment Regulations.
Important Safety Instruction
1. Do not block any ventilation openings. To ensure reliable operation of the
projector and to protect from over heating, it is recommended to install the
projector in a location that does not block ventilation. As an example, do
not place the projector on a crowded coffee table, sofa, bed, etc. Do not
put the projector in an enclosure such as a book case or a cabinet that
restricts air ow.
2. Do not use the projector near water or moisture. To reduce the risk of re
and/or electric shock, do not expose the projector to rain or moisture.
3. Do not install near heat sources such as radiators, heaters, stoves or any
other apparatus such as ampliers that emits heat.
4. Clean only with dry cloth.
5. Only use attachments/accessories specied by the manufacturer.
6. Do not use the unit if it has been physically damaged or abused. Physical
damage/abuse would be (but not limited to):
Unit has been dropped.
Power supply cord or plug has been damaged.
Liquid has been spilled on to the projector.
Projector has been exposed to rain or moisture.
Something has fallen in the projector or something is loose inside.
Do not attempt to service the unit yourself. Opening or removing covers
may expose you to dangerous voltages or other hazards. Please call
Optoma before you send the unit for repair.
7. Do not let objects or liquids enter the projector. They may touch danger-
ous voltage points and short out parts that could result in re or electric
shock.
8. See projector enclosure for safety related markings.
9. The unit should only be repaired by appropriate service personnel.
-
-
-
-
-
Safety Information
3English
Usage Notice
Please follow all warnings, precautions and mainte-
nance as recommended in this user’s guide.
When the lamp
reaches the end
of its life, the
projector will not
turn back on until
the lamp module
has been replaced.
To replace the
lamp, follow the
procedures listed
under “Replacing
the Lamp” section
on pages 59-60.
Warning- Do not look into the projector’s lens when the
lamp is on. The bright light may hurt your eyes.
Warning- To reduce the risk of  re or electric shock, do
not expose this projector to rain or moisture.
Warning- Please do not open or disassemble the projec-
tor as this may cause electric shock.
Warning- When replacing the lamp, please allow the unit
to cool down. Follow instructions as described
on pages 59-60.
Warning- This projector will detect the life of the lamp
itself. Please be sure to change the lamp when
it shows warning messages.
Warning- Reset the “Lamp Reset” function from the on-
screen display “Options|Lamp Settings” menu
after replacing the lamp module (refer to page
49).
Warning- When switching the projector off, please ensure
the cooling cycle has been completed before
disconnecting power. Allow 90 seconds for the
projector to cool down.
Warning- Do not use lens cap when projector is in opera-
tion.
Warning- When the lamp is approaching to the end of its
life time, the message “Lamp life exceeded.”
will show on the screen. Please contact your
local reseller or service center to change the
lamp as soon as possible.
Precautions


Produktspezifikationen

Marke: Optoma
Kategorie: Beamer
Modell: DH1009

Brauchst du Hilfe?

Wenn Sie Hilfe mit Optoma DH1009 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Beamer Optoma

Bedienungsanleitung Beamer

Neueste Bedienungsanleitung für -Kategorien-